J-Man Posted July 31, 2013 Share Posted July 31, 2013 Trying to burn a 23GB file to a single-layer Memorex BD-R disc. Log is below, but right before the program is ready to burn I get the following errors (which do not show in the log): "VirtualAlloc Failed! Reason: Not enough storage is available to process this command." And then: "Failed to initialise FIFO Buffer (1,073,741,824 bytes)" Log: I 16:57:37 ImgBurn Version 2.5.8.0 started!I 16:57:37 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)I 16:57:37 Total Physical Memory: 12,580,392 KiB - Available: 10,637,340 KiBI 16:57:37 Initialising SPTI...I 16:57:37 Searching for SCSI / ATAPI devices...I 16:57:37 -> Drive 1 - Info: HL-DT-ST BD-RE WH14NS40 1.01-A1 (D:) (ATAPI)I 16:57:37 Found 1 BD-RE XL!I 17:02:38 Operation Started!I 17:02:38 Building Image Tree...I 17:02:38 Calculating Totals...I 17:02:38 Preparing Image...I 17:02:38 Contents: 1 File, 0 FoldersI 17:02:38 Content Type: DataI 17:02:38 Data Type: MODE1/2048I 17:02:38 File System(s): UDF (2.50)I 17:02:39 Volume Label: [Not Configured]I 17:02:39 Size: 24,696,061,952 bytesI 17:02:39 Sectors: 12,058,624I 17:02:39 Image Size: 24,696,979,456 bytesI 17:02:39 Image Sectors: 12,059,072I 17:02:39 Operation Successfully Completed! - Duration: 00:00:00I 17:03:24 Operation Started!I 17:03:24 Building Image Tree...I 17:03:31 Calculating Totals...I 17:03:31 Preparing Image...I 17:03:31 Contents: 1 File, 0 FoldersI 17:03:31 Content Type: DataI 17:03:31 Data Type: MODE1/2048I 17:03:31 File System(s): UDF (2.50)I 17:03:31 Volume Label: SCI3I 17:03:31 Size: 24,696,061,952 bytesI 17:03:31 Sectors: 12,058,624I 17:03:31 Image Size: 24,696,979,456 bytesI 17:03:31 Image Sectors: 12,059,072I 17:03:33 Operation Successfully Completed! - Duration: 00:00:09 Any thoughts? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 31, 2013 Share Posted July 31, 2013 Return the I/O buffer to a smaller size. Link to comment Share on other sites More sharing options...
J-Man Posted July 31, 2013 Author Share Posted July 31, 2013 Interesting. Thanks for the info. I'm running 12gb of ram with a Xeon quad-core and ssd drive (I can get exact specs if needed) so I've got plenty of horsepower. The file was coming off a sata 2 hard disc in raid 1 though... Any thoughts on optimizing that setting, or should I just put it at the lowest value? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 31, 2013 Share Posted July 31, 2013 The default is 80MiB. Put it on 256MiB if you feel the default is too low. Link to comment Share on other sites More sharing options...
J-Man Posted August 1, 2013 Author Share Posted August 1, 2013 Thanks, worked like a charm! Been using the program for years now for DVDs and I love it! Link to comment Share on other sites More sharing options...
Recommended Posts