Kader Posted August 5, 2013 Posted August 5, 2013 (edited) Hello there I've just logged in to this forum, and I would like to kindly greet everyone I'm very much into this IMg burn, but I'm having some problem with the DVD's from verbatim. I can't record them with the img burn. The problem is the progress bar is going and it looks like something is being recorded, but in the end there is no data on the DVD and in the end there is no trace of recording on the cd (no track burned by laser). I have no problem fore example with sony cd's. I have tried to record the Verbatims with other software (CD Burner XP, integrated recording soft from windows 7) and it records the dvd with no problem. I don't like to record with this soft's I would preffer to write it with img burn, but I can't any ideas what can I do? If you need aditional information please don't hasitate to ask. I will give answer as precisely as possible. ps. Please excuse my bad English or grammar mistakes (espacially those;)) ps2. I heaven't post a log because I don't know if it's needed in this case, and I don't know how to create the log, or where it is but if it's needed in my case also I will try to find it. regards Kader Edited August 5, 2013 by Kader
LIGHTNING UK! Posted August 5, 2013 Posted August 5, 2013 Please post the log file - as per the pink box up the top
Kader Posted August 6, 2013 Author Posted August 6, 2013 One quick question, I should provide the log file after the problem occurs or can I send the log file created any time? The problem is that I updated the img burn to the latest release, and the problem was on the previous version
spinningwheel Posted August 6, 2013 Posted August 6, 2013 So there is no problem with the current version?
Kader Posted August 7, 2013 Author Posted August 7, 2013 I don't know I heaven't tested this with the new version, my point was that does a changing of version impacts on the analysis of the log file, after the installation the log file is replaced by the new one? If so, then I will try to record the dvd and then provide the log file.
spinningwheel Posted August 8, 2013 Posted August 8, 2013 my point was that does a changing of version impacts on the analysis of the log file It should not have any impact. The newest version is the most improved and therefore the easiest to use and understand. The log is a report of what the program has directed the drive to do and what the drive reported back to the program as well as some other info. A newer version may have additional info, but the report is the same format as it was day one of the progtram.
Kader Posted August 10, 2013 Author Posted August 10, 2013 OK the problem with new version and my mentionned dvds looks different now. It records a little bit of data and when I'm isnerting it to verify data I get an error saying : "Layout doesn't match" or something like that. Earlier IMG Burn did not record anything. Normallly on my laptop recording the dvd takes about 15 mintues this one took 30 secons (4 GB of data). I've attached the log file but I don't see anything there...no errors. But maybe you will see something else. ImgBurn.log
LIGHTNING UK! Posted August 10, 2013 Posted August 10, 2013 That log doesn't contain any actual 'operation' info from 2.5.8.0. The log file is only updated when you shut the app down. If it's still running, just copy + paste everything from the log window.
Kader Posted August 11, 2013 Author Posted August 11, 2013 OK i've reinstalled my system (not beacuse of the img burn) and I hoped it would help it did not. Ok so here is the log content I 09:34:18 ImgBurn Version 2.5.8.0 started!I 09:34:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)I 09:34:18 Total Physical Memory: 4 192 084 KiB - Available: 2 862 220 KiBI 09:34:18 Initialising SPTI...I 09:34:19 Searching for SCSI / ATAPI devices...I 09:34:19 -> Drive 1 - Info: Optiarc BD ROM BC-5500S 1.83 (F:) (SATA)I 09:34:19 Found 1 BD-ROM/DVD±RW!I 09:41:07 Operation Started!I 09:41:07 Building Image Tree...I 09:41:07 Checking Directory Depth...I 09:41:07 Calculating Totals...I 09:41:07 Preparing Image...I 09:41:08 Checking Path Length...I 09:41:08 Contents: 258 Files, 61 FoldersI 09:41:08 Content Type: DataI 09:41:08 Data Type: MODE1/2048I 09:41:08 File System(s): ISO9660, UDF (1.02)I 09:41:08 Volume Label: VIDEO_TURORIALS_12I 09:41:08 Size: 4 207 154 064 bytesI 09:41:08 Sectors: 2 054 404I 09:41:08 Image Size: 4 208 885 760 bytesI 09:41:08 Image Sectors: 2 055 120I 09:41:10 Operation Successfully Completed! - Duration: 00:00:02I 09:41:10 Operation Started!I 09:41:10 Source File: -==/\/[bUILD IMAGE]\/\==-I 09:41:10 Source File Sectors: 2 055 120 (MODE1/2048)I 09:41:10 Source File Size: 4 208 885 760 bytesI 09:41:10 Source File Volume Identifier: VIDEO_TURORIALS_12I 09:41:10 Source File Volume Set Identifier: 430B4D23001F5BC6I 09:41:10 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 09:41:10 Source File Implementation Identifier: ImgBurnI 09:41:10 Source File File System(s): ISO9660; UDF (1.02)I 09:41:10 Destination Device: [5:0:0] Optiarc BD ROM BC-5500S 1.83 (F:) (SATA)I 09:41:10 Destination Media Type: DVD+R (Disc ID: MCC-004-00)I 09:41:10 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8xI 09:41:10 Destination Media Sectors: 2 295 104I 09:41:10 Write Mode: DVDI 09:41:10 Write Type: DAOI 09:41:10 Write Speed: MAXI 09:41:10 DVD+R Reserve Track: NoI 09:41:10 Link Size: AutoI 09:41:10 Lock Volume: YesI 09:41:10 Test Mode: NoI 09:41:10 OPC: NoI 09:41:10 BURN-Proof: EnabledI 09:41:10 Write Speed Successfully Set! - Effective: 11 080 KB/s (8x)I 09:41:10 Book Type Setting: N/A (Reason: Invalid Command Operation Code)I 09:41:12 Filling Buffer... (80 MiB)I 09:41:14 Writing LeadIn...W 09:41:40 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area ErrorW 09:41:40 Retrying (1 of 20)...W 09:41:54 Retry Failed - Reason: Power Calibration Area ErrorW 09:41:54 Retrying (2 of 20)...W 09:42:08 Retry Failed - Reason: Power Calibration Area ErrorW 09:42:08 Retrying (3 of 20)...W 09:42:22 Retry Failed - Reason: Power Calibration Area ErrorW 09:42:22 Retrying (4 of 20)...W 09:42:36 Retry Failed - Reason: Power Calibration Area ErrorW 09:42:36 Retrying (5 of 20)...W 09:42:50 Retry Failed - Reason: Power Calibration Area ErrorW 09:42:50 Retrying (6 of 20)...W 09:43:04 Retry Failed - Reason: Power Calibration Area ErrorW 09:43:04 Retrying (7 of 20)...W 09:43:19 Retry Failed - Reason: Power Calibration Area ErrorW 09:43:19 Retrying (8 of 20)...W 09:43:33 Retry Failed - Reason: Power Calibration Area ErrorW 09:43:33 Retrying (9 of 20)...W 09:43:47 Retry Failed - Reason: Power Calibration Area ErrorW 09:43:47 Retrying (10 of 20)...W 09:44:01 Retry Failed - Reason: Power Calibration Area ErrorW 09:44:01 Retrying (11 of 20)...W 09:44:15 Retry Failed - Reason: Power Calibration Area ErrorW 09:44:15 Retrying (12 of 20)...W 09:44:29 Retry Failed - Reason: Power Calibration Area ErrorW 09:44:29 Retrying (13 of 20)...W 09:44:43 Retry Failed - Reason: Power Calibration Area ErrorW 09:44:44 Retrying (14 of 20)...W 09:44:58 Retry Failed - Reason: Power Calibration Area ErrorW 09:44:58 Retrying (15 of 20)...W 09:45:12 Retry Failed - Reason: Power Calibration Area ErrorW 09:45:12 Retrying (16 of 20)...W 09:45:26 Retry Failed - Reason: Power Calibration Area ErrorW 09:45:26 Retrying (17 of 20)...W 09:45:40 Retry Failed - Reason: Power Calibration Area ErrorW 09:45:40 Retrying (18 of 20)...W 09:45:54 Retry Failed - Reason: Power Calibration Area ErrorW 09:45:54 Retrying (19 of 20)...W 09:46:09 Retry Failed - Reason: Power Calibration Area ErrorW 09:46:09 Retrying (20 of 20)...W 09:46:23 Retry Failed - Reason: Power Calibration Area ErrorE 09:47:54 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area ErrorI 09:47:54 Synchronising Cache...W 09:48:02 User opted to skip the 'Close Track/Session/Disc' functions.E 09:48:02 Failed to Write Image!E 09:48:02 Operation Failed! - Duration: 00:06:51I 09:48:02 Average Write Rate: N/A - Maximum Write Rate: N/A aditionally there was an popup with the error so I'm attaching the print screen of the error. The buttons are in Polish, so the one on the left is Retry and the one on the RIght is cancel if this has some meaning.
ianymaty Posted August 11, 2013 Posted August 11, 2013 That's usually an indication of the drive not like the disc. Try a different supported write speed instead of MAX (8x). Try cleaning the drive with a cleaning disc.
spinningwheel Posted August 11, 2013 Posted August 11, 2013 If ianmaty's suggestions fail, you'll probably need a new drive.
Kader Posted August 11, 2013 Author Posted August 11, 2013 The problem is on other software (I've wrote on the start Windows Default DVD Burnerr and CD Burrner XP) the DVD is written correctly. I will try to set this thing to low speed, byt since it is working on another software the problem is not with my drive or a matter of wiping the DVD
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now