amonti Posted August 15, 2013 Posted August 15, 2013 Hi there, I am at my wits end with this one here, been trying to correct it through forums and help pages with no solution yet. I have a HP Pavilion DV7-3165dx Entertainment Notebook. The drive is a "dvdwbd ts-lb23L 0400" I have Sony DVD-R which I am pretty sure I have used in past. I keep getting the same error. When I put DVD to play, it plays a few minutes and then stops and starts over. I tried write speeds of 4x and 8x. I checked that my driver was updated, and it says I have most up to date. Please help. This is the Error Message that pops up, and the log follows: IO error Device: 1:0:0 hp dvdwbd ts-lb23L 0400 (F:) SATA ScsiStatus 0x02 Interpretation; check condition CBD: 2A 00 00 00 52 E0 00 00 20 00 Interpretation: write(10) - sectors 21216-21247 Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00 Interpretation: Write Error I 14:23:31 ImgBurn Version 2.4.4.0 started! I 14:23:31 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 14:23:31 Total Physical Memory: 3,928,264 KB - Available: 1,389,760 KB W 14:23:31 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 14:23:31 Initialising SPTI... I 14:23:31 Searching for SCSI / ATAPI devices... I 14:23:34 Found 1 BD-ROM and 1 BD-ROM/DVD±RW! I 14:23:37 Operation Started! I 14:23:37 Source File: C:\Users\Arien\Documents\dvd\dvd.iso I 14:23:37 Source File Sectors: 2,270,656 (MODE1/2048) I 14:23:37 Source File Size: 4,650,303,488 bytes I 14:23:37 Source File Volume Identifier: DVD Video I 14:23:37 Source File Volume Set Identifier: 430F72A50022A5AF I 14:23:37 Source File Application Identifier: IMGBURN V2.4.4.0 - THE ULTIMATE IMAGE BURNER! I 14:23:37 Source File Implementation Identifier: ImgBurn I 14:23:37 Source File File System(s): ISO9660, UDF (1.02) I 14:23:37 Destination Device: [1:0:0] hp DVDWBD TS-LB23L 0400 (F:) (SATA) I 14:23:37 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 3.3x, 4x, 6x, 8x) I 14:23:37 Destination Media Sectors: 2,298,496 I 14:23:37 Write Mode: DVD I 14:23:37 Write Type: DAO I 14:23:37 Write Speed: 8x I 14:23:37 Link Size: Auto I 14:23:37 Lock Volume: Yes I 14:23:37 Test Mode: No I 14:23:37 OPC: No I 14:23:37 BURN-Proof: Enabled I 14:23:39 Filling Buffer... (40 MB) I 14:23:41 Writing LeadIn... I 14:24:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 2270655) I 14:24:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2270655) W 14:37:26 Failed to Write Sectors 21216 - 21247 - Reason: Write Error W 14:37:26 Retrying (1 of 20)... W 14:37:31 Retry Failed - Reason: Invalid Address For Write W 14:37:31 Retrying (2 of 20)... W 14:37:51 Retry Failed - Reason: Invalid Address For Write W 14:37:51 Retrying (3 of 20)... W 14:37:56 Retry Failed - Reason: Invalid Address For Write W 14:37:56 Retrying (4 of 20)... W 14:38:13 Retry Failed - Reason: Invalid Address For Write W 14:38:13 Retrying (5 of 20)... W 14:38:17 Retry Failed - Reason: Invalid Address For Write W 14:38:18 Retrying (6 of 20)... W 14:38:39 Retry Failed - Reason: Invalid Address For Write W 14:38:39 Retrying (7 of 20)... W 14:38:44 Retry Failed - Reason: Invalid Address For Write W 14:38:44 Retrying (8 of 20)... W 14:39:03 Retry Failed - Reason: Invalid Address For Write W 14:39:03 Retrying (9 of 20)... W 14:39:07 Retry Failed - Reason: Invalid Address For Write W 14:39:07 Retrying (10 of 20)... W 14:39:34 Retry Failed - Reason: Invalid Address For Write W 14:39:34 Retrying (11 of 20)... W 14:39:39 Retry Failed - Reason: Invalid Address For Write W 14:39:39 Retrying (12 of 20)... W 14:40:03 Retry Failed - Reason: Invalid Address For Write W 14:40:03 Retrying (13 of 20)... W 14:40:08 Retry Failed - Reason: Invalid Address For Write W 14:40:08 Retrying (14 of 20)... W 14:40:35 Retry Failed - Reason: Invalid Address For Write W 14:40:35 Retrying (15 of 20)... W 14:40:40 Retry Failed - Reason: Invalid Address For Write W 14:40:40 Retrying (16 of 20)... W 14:40:59 Retry Failed - Reason: Invalid Address For Write W 14:40:59 Retrying (17 of 20)... W 14:41:04 Retry Failed - Reason: Invalid Address For Write W 14:41:04 Retrying (18 of 20)... W 14:41:25 Retry Failed - Reason: Invalid Address For Write W 14:41:25 Retrying (19 of 20)... W 14:41:30 Retry Failed - Reason: Invalid Address For Write W 14:41:30 Retrying (20 of 20)... W 14:41:48 Retry Failed - Reason: Invalid Address For Write E 14:44:37 Failed to Write Sectors 21216 - 21247 - Reason: Write Error E 14:44:39 Next Writable Address: 0 I 14:44:39 Synchronising Cache... W 14:45:31 User opted to skip the 'Close Track/Session/Disc' functions. E 14:45:32 Failed to Write Image!
spinningwheel Posted August 15, 2013 Posted August 15, 2013 I 14:23:31 ImgBurn Version 2.4.4.0 started! Update to the latest ImgBurn. I 14:23:37 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 3.3x, 4x, 6x, 8x) Even though the following link is mostly for dual layer media it still applies in your case. http://forum.imgburn.com/index.php?showtopic=8000
amonti Posted August 15, 2013 Author Posted August 15, 2013 Ok, so your saying I need an updated imgburn? Because I use DVD Flick with comes with imgburn, so it encodes it and then imgburn automatically opens right up, DVD Flick says I have the most up to date version of the DVD Flick so i am not sure how to update just the imgburn? So I guess how would I save the encoded movie to then open up my seperate updated version of imgburn to then burn it? Does that make sense? lol
amonti Posted August 15, 2013 Author Posted August 15, 2013 Oh, also, I had previously went to the tools-drive to check for firmware updates, it told me mine was 0400- and I cannot see that one in the list the firmware hq site shows.
amonti Posted August 15, 2013 Author Posted August 15, 2013 Me again, sorry. If I get the latest img burn, should I download it into the old imgburn folder within my DVD FLick Program folder?
LIGHTNING UK! Posted August 16, 2013 Posted August 16, 2013 Install it into its own folder and then just copy + paste the imgburn exe into the dvdflick one, overwriting the old one that's in there.
amonti Posted August 16, 2013 Author Posted August 16, 2013 Hi, So last night I installed the latest imgburn and and just installed it right into the folder in DVD FLick which replaced the old imgburn, tried to burn the movie and it got stuck at the same spot as all the others, while writing the sectors- I didn't wait for it to finish because I knew it wasn't going to work. I noticed in one spot on imgburn somewhere it said "burn capacity" and it was lkike 1,3,4,6, and 8x- does that mean it wont burn onto this particular DVD which is Sony DVD-R 16x- I also saw some posts before I THINK about burners not liking these dvds. I usually honestly use Memoriex DVD+R= and never have problem- my friend got these for me since I am not driving right now.
spinningwheel Posted August 17, 2013 Posted August 17, 2013 Memorex does not manufacture a disc or media. They buy, generally from the lowest bidder at the time, whatever crap is available and they put their name on it. They do not care if 1 out of 5 or 10 or 20 discs fails or works, they need to keep making sales to keep their bottom line healthy. There are only 3-4 major disc makers in the world and there are also a couple really shady makers that clone other manufacturers info and sell their crap under other makers good names. We only recommend the media that is commented on in the link I posted for you. They produce a great product and even sometimes they make mistakes. Good burns mainly come down to drive/firmware/media. Most other problems need more thought and action to correct. 2,4,6,8,x burnini is controlled by the firmware in your drive and is set when your drive recognizes the media and then figures out what speeds it can burn it at. If you chose 16x and your drive can only burn it at 8x then 8x is what you get and the program lets you know what speed it can burn at. I am not positively sure, but I think Sony is not a media manufacturer.
amonti Posted August 18, 2013 Author Posted August 18, 2013 Thank you. I actually have been using the memorex dvd+r the whole time and they always worked. My friend grabbed these sony ones for me and it's the first time I had any problems despite efforts to make it work. I always set the burn speed at 4x, and if it's ever more, no more then 8x. I have him exchanging dvd's for the ones that I have had success with and hopefully I'm all set.
spinningwheel Posted August 19, 2013 Posted August 19, 2013 Good luck and let us know how it sorts out.
amonti Posted August 19, 2013 Author Posted August 19, 2013 Thank you, and thank you to everyone- I am still waiting for the replacement DVD's so I'll let all know soon so everyone has another bit of information for their mental filing cabinet!
Recommended Posts