Jump to content

Problems burning xbox games with a ihas 524B and Aone Gold disks


Disturbed316
 Share

Recommended Posts

I had a ihas 124b drive which I had 1 good burn with, so I decided to buy another drive an ihas 524...every single one now is failing, they hardly even start burning and when they do they stop at around 50%, im using Aone Gold double layer disks ( I know verbs are the best - but also slightly more expensive)...my friend...who has an ihas 324 and burns with Aone gold disks never gets any fails....ive tried every setting under the sun and im at a loose end now...

 

here is the info from my last try, if anybody can help me that would be very much appreciated, Thanks.

 

I 19:07:30 ImgBurn Version 2.5.7.0 started!
I 19:07:30 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 19:07:30 Total Physical Memory: 4,193,592 KB  -  Available: 2,314,928 KB
I 19:07:30 Initialising SPTI...
I 19:07:30 Searching for SCSI / ATAPI devices...
I 19:07:30 -> Drive 1 - Info: ATAPI iHAS524   B AL2A (E:) (ATA)
I 19:07:30 Found 1 DVD±RW/RAM!
I 19:15:59 Operation Started!
I 19:15:59 Source File: D:\imars-dir-360\imars-dir-360.dvd
I 19:15:59 Source File Sectors: 3,827,488 (MODE1/2048)
I 19:15:59 Source File Size: 7,838,695,424 bytes
I 19:15:59 Source File Volume Identifier: DVD_ROM
I 19:15:59 Source File Volume Set Identifier: d168c000MS UDFBridge
I 19:15:59 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 19:15:59 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 19:15:59 Source File File System(s): ISO9660, UDF (1.50)
I 19:15:59 Destination Device: [2:1:0] ATAPI iHAS524   B AL2A (E:) (ATA)
I 19:15:59 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)
I 19:15:59 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 19:15:59 Destination Media Sectors: 4,267,040
I 19:15:59 Write Mode: DVD
I 19:15:59 Write Type: DAO
I 19:15:59 Write Speed: 4x
I 19:15:59 DVD+R DL Reserve Track: No
I 19:15:59 Link Size: Auto
I 19:15:59 Lock Volume: Yes
I 19:15:59 Test Mode: No
I 19:15:59 OPC: No
I 19:15:59 BURN-Proof: Disabled
I 19:15:59 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 19:15:59 Book Type Setting: DVD-ROM
I 19:15:59 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 19:15:59 User Specified L0 Data Zone Capacity: 1,913,760
W 19:17:12 Set L0 Data Zone Capacity Failed! - Reason: Timeout on Logical Unit
E 19:17:17 Set L0 Data Zone Capacity Failed! - Reason: Timeout on Logical Unit
E 19:17:17 Operation Failed! - Duration: 00:01:17
I 19:17:17 Average Write Rate: N/A - Maximum Write Rate: N/A
 

Link to comment
Share on other sites

You may need OHT enabled for non verbatim discs.

 

All of ImgBurn's settings can be left on their default values.

 

Maybe try it with 'Perform OPC Before Write' enabled/disabled though as that one could actually make a difference.

 

Make sure you clear OPC history at least once before trying stuff again though.

Link to comment
Share on other sites

thanks for the reply mate, ive done everything you've said....as you can see...no such luck :-(

 

I 22:56:39 ImgBurn Version 2.5.7.0 started!
I 22:56:39 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 22:56:39 Total Physical Memory: 4,193,592 KB  -  Available: 2,705,580 KB
I 22:56:39 Initialising SPTI...
I 22:56:39 Searching for SCSI / ATAPI devices...
I 22:56:39 -> Drive 1 - Info: ATAPI iHAS524   B AL2A (E:) (ATA)
I 22:56:39 Found 1 DVD±RW/RAM!
I 22:56:59 Operation Started!
I 22:56:59 Source File: D:\imars-dir-360\imars-dir-360.dvd
I 22:56:59 Source File Sectors: 3,827,488 (MODE1/2048)
I 22:56:59 Source File Size: 7,838,695,424 bytes
I 22:56:59 Source File Volume Identifier: DVD_ROM
I 22:56:59 Source File Volume Set Identifier: d168c000MS UDFBridge
I 22:56:59 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 22:56:59 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 22:56:59 Source File File System(s): ISO9660, UDF (1.50)
I 22:56:59 Destination Device: [2:1:0] ATAPI iHAS524   B AL2A (E:) (ATA)
I 22:56:59 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)
I 22:56:59 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 22:56:59 Destination Media Sectors: 4,267,040
I 22:56:59 Write Mode: DVD
I 22:56:59 Write Type: DAO
I 22:56:59 Write Speed: 4x
I 22:56:59 DVD+R DL Reserve Track: No
I 22:56:59 Link Size: Auto
I 22:56:59 Lock Volume: Yes
I 22:56:59 Test Mode: No
I 22:56:59 OPC: No
I 22:56:59 BURN-Proof: Disabled
I 22:56:59 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 22:56:59 Book Type Setting: DVD-ROM
I 22:56:59 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes
I 22:56:59 Optimal L0 Data Zone Capacity: 1,913,760
I 22:56:59 Optimal L0 Data Zone Method: Copied From Original Disc
W 22:58:08 Set L0 Data Zone Capacity Failed! - Reason: Timeout on Logical Unit
E 22:58:13 Set L0 Data Zone Capacity Failed! - Reason: Timeout on Logical Unit
E 22:58:13 Operation Failed! - Duration: 00:01:14
I 22:58:13 Average Write Rate: N/A - Maximum Write Rate: N/A


 

Link to comment
Share on other sites

ive had another crack at it today without verbs.....its wanting to go but now I get this

 

I 13:13:42 ImgBurn Version 2.5.7.0 started!
I 13:13:42 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 13:13:42 Total Physical Memory: 4,193,592 KB  -  Available: 2,486,488 KB
I 13:13:42 Initialising SPTI...
I 13:13:42 Searching for SCSI / ATAPI devices...
I 13:13:43 -> Drive 1 - Info: ATAPI iHAS524   B AL2A (E:) (ATA)
I 13:13:43 Found 1 DVD±RW/RAM!
I 13:13:50 Operation Started!
I 13:13:50 Source File: I:\Newsbin\imars-scbl-360a.dvd
I 13:13:50 Source File Sectors: 4,267,015 (MODE1/2048)
I 13:13:50 Source File Size: 8,738,846,720 bytes
I 13:13:50 Source File Volume Identifier: DVD_ROM
I 13:13:50 Source File Volume Set Identifier: e9604000MS UDFBridge
I 13:13:50 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 13:13:50 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 13:13:50 Source File File System(s): ISO9660, UDF (1.50)
I 13:13:50 Destination Device: [2:1:0] ATAPI iHAS524   B AL2A (E:) (ATA)
I 13:13:50 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)
I 13:13:50 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 13:13:50 Destination Media Sectors: 4,267,040
I 13:13:50 Write Mode: DVD
I 13:13:50 Write Type: DAO
I 13:13:50 Write Speed: 4x
I 13:13:50 DVD+R DL Reserve Track: No
I 13:13:50 Link Size: Auto
I 13:13:50 Lock Volume: Yes
I 13:13:50 Test Mode: No
I 13:13:50 OPC: No
I 13:13:50 BURN-Proof: Disabled
I 13:13:51 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 13:13:51 Book Type Setting: DVD-ROM
I 13:13:51 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 13:13:51 Optimal L0 Data Zone Capacity: 2,133,520
I 13:13:51 Optimal L0 Data Zone Method: Copied From Original Disc
I 13:13:52 Set L0 Data Zone Capacity Succeeded!
I 13:13:52 Filling Buffer... (500 MB)
I 13:14:21 Writing LeadIn...
W 13:14:21 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 13:14:21 Retrying (1 of 20)...
W 13:14:22 Retry Failed - Reason: Power Calibration Area Error
W 13:14:22 Retrying (2 of 20)...
W 13:14:23 Retry Failed - Reason: Power Calibration Area Error
W 13:14:23 Retrying (3 of 20)...
W 13:14:24 Retry Failed - Reason: Power Calibration Area Error
W 13:14:24 Retrying (4 of 20)...
W 13:14:25 Retry Failed - Reason: Power Calibration Area Error
W 13:14:25 Retrying (5 of 20)...
W 13:14:26 Retry Failed - Reason: Power Calibration Area Error
W 13:14:27 Retrying (6 of 20)...
W 13:14:28 Retry Failed - Reason: Power Calibration Area Error
W 13:14:28 Retrying (7 of 20)...
W 13:14:29 Retry Failed - Reason: Power Calibration Area Error
W 13:14:29 Retrying (8 of 20)...
W 13:14:30 Retry Failed - Reason: Power Calibration Area Error
W 13:14:30 Retrying (9 of 20)...
W 13:14:31 Retry Failed - Reason: Power Calibration Area Error
W 13:14:31 Retrying (10 of 20)...
W 13:14:32 Retry Failed - Reason: Power Calibration Area Error
W 13:14:32 Retrying (11 of 20)...
W 13:14:33 Retry Failed - Reason: Power Calibration Area Error
W 13:14:33 Retrying (12 of 20)...
W 13:14:34 Retry Failed - Reason: Power Calibration Area Error
W 13:14:34 Retrying (13 of 20)...
W 13:14:36 Retry Failed - Reason: Power Calibration Area Error
W 13:14:36 Retrying (14 of 20)...
W 13:14:37 Retry Failed - Reason: Power Calibration Area Error
W 13:14:37 Retrying (15 of 20)...
W 13:14:38 Retry Failed - Reason: Power Calibration Area Error
W 13:14:38 Retrying (16 of 20)...
W 13:14:39 Retry Failed - Reason: Power Calibration Area Error
W 13:14:39 Retrying (17 of 20)...
W 13:14:40 Retry Failed - Reason: Power Calibration Area Error
W 13:14:40 Retrying (18 of 20)...
W 13:14:41 Retry Failed - Reason: Power Calibration Area Error


 

Link to comment
Share on other sites

I 13:13:42 ImgBurn Version 2.5.7.0 started!

Update ImgBurn please.

 

ive had another crack at it today without verbs.

The power cal area error means that your drive can't figure out how to set the laser power to burn your media.  With the errors above already reported it's simple enough to imply that your drive simply does not like the RICOHJPN-D01-67 media.  Since you can't make it like the Ricoh media, your choices are really limited either make the change to Verbs or replace the drive.

Link to comment
Share on other sites

well ive just ordered my first lot of 25 verbs, I just hope im doing the right thing...I hope this works !!...will let you both know once they come and ive tried one. what settings would you both recommend on an ihas 524b with verbs ?

Only use the Verbs for XGD3. Save the Aone for XGD2 backups.

Link to comment
Share on other sites

whats the difference dude ?

 

well ive just ordered my first lot of 25 verbs, I just hope im doing the right thing...I hope this works !!...will let you both know once they come and ive tried one. what settings would you both recommend on an ihas 524b with verbs ?


Only use the Verbs for XGD3. Save the Aone for XGD2 backups.
Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.