Disturbed316 Posted August 24, 2013 Posted August 24, 2013 I had a ihas 124b drive which I had 1 good burn with, so I decided to buy another drive an ihas 524...every single one now is failing, they hardly even start burning and when they do they stop at around 50%, im using Aone Gold double layer disks ( I know verbs are the best - but also slightly more expensive)...my friend...who has an ihas 324 and burns with Aone gold disks never gets any fails....ive tried every setting under the sun and im at a loose end now... here is the info from my last try, if anybody can help me that would be very much appreciated, Thanks. I 19:07:30 ImgBurn Version 2.5.7.0 started!I 19:07:30 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)I 19:07:30 Total Physical Memory: 4,193,592 KB - Available: 2,314,928 KBI 19:07:30 Initialising SPTI...I 19:07:30 Searching for SCSI / ATAPI devices...I 19:07:30 -> Drive 1 - Info: ATAPI iHAS524 B AL2A (E:) (ATA)I 19:07:30 Found 1 DVD±RW/RAM!I 19:15:59 Operation Started!I 19:15:59 Source File: D:\imars-dir-360\imars-dir-360.dvdI 19:15:59 Source File Sectors: 3,827,488 (MODE1/2048)I 19:15:59 Source File Size: 7,838,695,424 bytesI 19:15:59 Source File Volume Identifier: DVD_ROMI 19:15:59 Source File Volume Set Identifier: d168c000MS UDFBridgeI 19:15:59 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 19:15:59 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 19:15:59 Source File File System(s): ISO9660, UDF (1.50)I 19:15:59 Destination Device: [2:1:0] ATAPI iHAS524 B AL2A (E:) (ATA)I 19:15:59 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)I 19:15:59 Destination Media Supported Write Speeds: 4x, 6x, 8xI 19:15:59 Destination Media Sectors: 4,267,040I 19:15:59 Write Mode: DVDI 19:15:59 Write Type: DAOI 19:15:59 Write Speed: 4xI 19:15:59 DVD+R DL Reserve Track: NoI 19:15:59 Link Size: AutoI 19:15:59 Lock Volume: YesI 19:15:59 Test Mode: NoI 19:15:59 OPC: NoI 19:15:59 BURN-Proof: DisabledI 19:15:59 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)I 19:15:59 Book Type Setting: DVD-ROMI 19:15:59 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: YesI 19:15:59 User Specified L0 Data Zone Capacity: 1,913,760W 19:17:12 Set L0 Data Zone Capacity Failed! - Reason: Timeout on Logical UnitE 19:17:17 Set L0 Data Zone Capacity Failed! - Reason: Timeout on Logical UnitE 19:17:17 Operation Failed! - Duration: 00:01:17I 19:17:17 Average Write Rate: N/A - Maximum Write Rate: N/A
LIGHTNING UK! Posted August 24, 2013 Posted August 24, 2013 You may need OHT enabled for non verbatim discs. All of ImgBurn's settings can be left on their default values. Maybe try it with 'Perform OPC Before Write' enabled/disabled though as that one could actually make a difference. Make sure you clear OPC history at least once before trying stuff again though.
Disturbed316 Posted August 24, 2013 Author Posted August 24, 2013 thanks for the reply mate, ive done everything you've said....as you can see...no such luck :-( I 22:56:39 ImgBurn Version 2.5.7.0 started!I 22:56:39 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)I 22:56:39 Total Physical Memory: 4,193,592 KB - Available: 2,705,580 KBI 22:56:39 Initialising SPTI...I 22:56:39 Searching for SCSI / ATAPI devices...I 22:56:39 -> Drive 1 - Info: ATAPI iHAS524 B AL2A (E:) (ATA)I 22:56:39 Found 1 DVD±RW/RAM!I 22:56:59 Operation Started!I 22:56:59 Source File: D:\imars-dir-360\imars-dir-360.dvdI 22:56:59 Source File Sectors: 3,827,488 (MODE1/2048)I 22:56:59 Source File Size: 7,838,695,424 bytesI 22:56:59 Source File Volume Identifier: DVD_ROMI 22:56:59 Source File Volume Set Identifier: d168c000MS UDFBridgeI 22:56:59 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 22:56:59 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 22:56:59 Source File File System(s): ISO9660, UDF (1.50)I 22:56:59 Destination Device: [2:1:0] ATAPI iHAS524 B AL2A (E:) (ATA)I 22:56:59 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)I 22:56:59 Destination Media Supported Write Speeds: 4x, 6x, 8xI 22:56:59 Destination Media Sectors: 4,267,040I 22:56:59 Write Mode: DVDI 22:56:59 Write Type: DAOI 22:56:59 Write Speed: 4xI 22:56:59 DVD+R DL Reserve Track: NoI 22:56:59 Link Size: AutoI 22:56:59 Lock Volume: YesI 22:56:59 Test Mode: NoI 22:56:59 OPC: NoI 22:56:59 BURN-Proof: DisabledI 22:56:59 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)I 22:56:59 Book Type Setting: DVD-ROMI 22:56:59 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: YesI 22:56:59 Optimal L0 Data Zone Capacity: 1,913,760I 22:56:59 Optimal L0 Data Zone Method: Copied From Original DiscW 22:58:08 Set L0 Data Zone Capacity Failed! - Reason: Timeout on Logical UnitE 22:58:13 Set L0 Data Zone Capacity Failed! - Reason: Timeout on Logical UnitE 22:58:13 Operation Failed! - Duration: 00:01:14I 22:58:13 Average Write Rate: N/A - Maximum Write Rate: N/A
LIGHTNING UK! Posted August 24, 2013 Posted August 24, 2013 Try some Verbatim discs then. If it still does the same thing, it's either your drive or your system as a whole.
Disturbed316 Posted August 25, 2013 Author Posted August 25, 2013 ive had another crack at it today without verbs.....its wanting to go but now I get this I 13:13:42 ImgBurn Version 2.5.7.0 started!I 13:13:42 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)I 13:13:42 Total Physical Memory: 4,193,592 KB - Available: 2,486,488 KBI 13:13:42 Initialising SPTI...I 13:13:42 Searching for SCSI / ATAPI devices...I 13:13:43 -> Drive 1 - Info: ATAPI iHAS524 B AL2A (E:) (ATA)I 13:13:43 Found 1 DVD±RW/RAM!I 13:13:50 Operation Started!I 13:13:50 Source File: I:\Newsbin\imars-scbl-360a.dvdI 13:13:50 Source File Sectors: 4,267,015 (MODE1/2048)I 13:13:50 Source File Size: 8,738,846,720 bytesI 13:13:50 Source File Volume Identifier: DVD_ROMI 13:13:50 Source File Volume Set Identifier: e9604000MS UDFBridgeI 13:13:50 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 13:13:50 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 13:13:50 Source File File System(s): ISO9660, UDF (1.50)I 13:13:50 Destination Device: [2:1:0] ATAPI iHAS524 B AL2A (E:) (ATA)I 13:13:50 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)I 13:13:50 Destination Media Supported Write Speeds: 4x, 6x, 8xI 13:13:50 Destination Media Sectors: 4,267,040I 13:13:50 Write Mode: DVDI 13:13:50 Write Type: DAOI 13:13:50 Write Speed: 4xI 13:13:50 DVD+R DL Reserve Track: NoI 13:13:50 Link Size: AutoI 13:13:50 Lock Volume: YesI 13:13:50 Test Mode: NoI 13:13:50 OPC: NoI 13:13:50 BURN-Proof: DisabledI 13:13:51 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)I 13:13:51 Book Type Setting: DVD-ROMI 13:13:51 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: YesI 13:13:51 Optimal L0 Data Zone Capacity: 2,133,520I 13:13:51 Optimal L0 Data Zone Method: Copied From Original DiscI 13:13:52 Set L0 Data Zone Capacity Succeeded!I 13:13:52 Filling Buffer... (500 MB)I 13:14:21 Writing LeadIn...W 13:14:21 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area ErrorW 13:14:21 Retrying (1 of 20)...W 13:14:22 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:22 Retrying (2 of 20)...W 13:14:23 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:23 Retrying (3 of 20)...W 13:14:24 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:24 Retrying (4 of 20)...W 13:14:25 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:25 Retrying (5 of 20)...W 13:14:26 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:27 Retrying (6 of 20)...W 13:14:28 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:28 Retrying (7 of 20)...W 13:14:29 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:29 Retrying (8 of 20)...W 13:14:30 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:30 Retrying (9 of 20)...W 13:14:31 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:31 Retrying (10 of 20)...W 13:14:32 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:32 Retrying (11 of 20)...W 13:14:33 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:33 Retrying (12 of 20)...W 13:14:34 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:34 Retrying (13 of 20)...W 13:14:36 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:36 Retrying (14 of 20)...W 13:14:37 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:37 Retrying (15 of 20)...W 13:14:38 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:38 Retrying (16 of 20)...W 13:14:39 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:39 Retrying (17 of 20)...W 13:14:40 Retry Failed - Reason: Power Calibration Area ErrorW 13:14:40 Retrying (18 of 20)...W 13:14:41 Retry Failed - Reason: Power Calibration Area Error
spinningwheel Posted August 25, 2013 Posted August 25, 2013 I 13:13:42 ImgBurn Version 2.5.7.0 started! Update ImgBurn please. ive had another crack at it today without verbs. The power cal area error means that your drive can't figure out how to set the laser power to burn your media. With the errors above already reported it's simple enough to imply that your drive simply does not like the RICOHJPN-D01-67 media. Since you can't make it like the Ricoh media, your choices are really limited either make the change to Verbs or replace the drive.
Disturbed316 Posted August 25, 2013 Author Posted August 25, 2013 well ive just ordered my first lot of 25 verbs, I just hope im doing the right thing...I hope this works !!...will let you both know once they come and ive tried one. what settings would you both recommend on an ihas 524b with verbs ?
RhoTrux64 Posted August 25, 2013 Posted August 25, 2013 well ive just ordered my first lot of 25 verbs, I just hope im doing the right thing...I hope this works !!...will let you both know once they come and ive tried one. what settings would you both recommend on an ihas 524b with verbs ? Only use the Verbs for XGD3. Save the Aone for XGD2 backups.
Disturbed316 Posted August 26, 2013 Author Posted August 26, 2013 whats the difference dude ? well ive just ordered my first lot of 25 verbs, I just hope im doing the right thing...I hope this works !!...will let you both know once they come and ive tried one. what settings would you both recommend on an ihas 524b with verbs ? Only use the Verbs for XGD3. Save the Aone for XGD2 backups.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now