Taurus50 Posted October 18, 2013 Share Posted October 18, 2013 I 07:45:17 ImgBurn Version 2.5.8.0 started!I 07:45:17 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)I 07:45:17 Total Physical Memory: 16.717.832 KiB - Available: 15.314.192 KiBI 07:45:17 Initialising SPTI...I 07:45:17 Searching for SCSI / ATAPI devices...I 07:45:17 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.01-A0 (O:) (SATA)I 07:45:17 Found 1 BD-RE!I 07:47:18 Operation Started!I 07:47:18 Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.01 (O:) (SATA)I 07:47:18 Media Type: BD-RE (Disc ID: PHILIP-W02-000)I 07:47:18 Media Supported Write Speeds: 2,3xI 07:47:18 Quick Erase: NoI 07:47:18 Format Properly: YesI 07:47:18 Format Size: MaximumI 07:47:18 Format With Full Certification: YesI 07:47:18 Format Without Spare Areas: YesI 07:47:18 Erasing Disc... Now it is 10:00 and since about 2 hours the program shows the same figure: 8%. Just out of curiosity, how long will I have to wait for? What can I do? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 18, 2013 Share Posted October 18, 2013 If it's showing a % and that % hasn't changed in a long time, your drive must have given up/got stuck. ImgBurn isn't actually doing anything other than querying the drive each second to see if it's still busy formatting and if so, how far it's got. I'd probably reboot and try again if I were you. Can I get you to post the 'family tree' info for your drive please? Right click the drive selection box when you're in Write mode and click 'Family Tree'. Close the prompt that comes up and then copy + paste everything from the Log window. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts