bongiobul Posted September 22, 2006 Share Posted September 22, 2006 hey folks, totally new to all of this, was trying to burn an iso that i created using your program, and getting that error. i am trying to burn using cd-r in a cd-r drive, is this my problem? or am i missing something even more basic that that? sorry if these are dumb questions Link to comment Share on other sites More sharing options...
bongiobul Posted September 22, 2006 Author Share Posted September 22, 2006 hey folks, i meant to mention, i looked all over the posts, searching for anyone else even mentioning this problem, with no luck, which leads me to believe i am jamming a square peg in a round hole, so to speak. again, sorry for the noobishness Link to comment Share on other sites More sharing options...
spinningwheel Posted September 22, 2006 Share Posted September 22, 2006 bongiobul...Welcome to the forum Can you post a log of the failed burn? Link to comment Share on other sites More sharing options...
bongiobul Posted September 22, 2006 Author Share Posted September 22, 2006 (edited) bongiobul...Welcome to the forum Can you post a log of the failed burn? damn man, that was quick, thank you! anyway, here it is: I 17:03:21 Operation Started! I 17:03:21 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 17:03:21 Source File Sectors: 359,846 (MODE1/2048) I 17:03:21 Source File Size: 736,964,608 bytes I 17:03:21 Source File Volume Identifier: DISCOVERY_IMAGE I 17:03:21 Source File File System(s): None I 17:03:21 Destination Device: [1:1:0] PHILIPS CDD3610 CD-R/RW 3.08 (E:) (ATA) I 17:03:21 Destination Media Type: CD-R* I 17:03:21 Destination Media Sectors: 359,846 I 17:03:21 Write Mode: CD I 17:03:21 Write Type: SAO I 17:03:21 Write Speed: 1x I 17:03:21 Test Mode: No I 17:03:21 BURN-Proof: Enabled E 17:03:21 Failed to set Write Parameters! E 17:03:22 Operation Failed! - Duration: 00:00:01 I 17:03:22 Average Write Rate: N/A - Maximum Write Rate: N/A so, i am wondering if i can make a vcd with this program? Edited September 22, 2006 by bongiobul Link to comment Share on other sites More sharing options...
polopony Posted September 23, 2006 Share Posted September 23, 2006 try a speed other than 1X you really dont see any media or drives that support it these days also everything needs to be converted to ISO image for IMGburn to burn it. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 23, 2006 Share Posted September 23, 2006 Is that the only burner you have? It probably dates back way before the MMC specs were really taken on by drive - and ImgBurn follows the MMC specs. btw, you know that discovery mode just writes 'nothing' (lots of zeroes) to a disc yeah? If you want to burn something you need 'Write' or 'Build' modes. Link to comment Share on other sites More sharing options...
Recommended Posts