JBMouse Posted December 8, 2013 Share Posted December 8, 2013 Trying to burn D/L BD-R RE disk, done it once only successfully immediately after Imgburn formatted the ner BD-R RE disk, but now I try to burn another titlle, and then the same original title to the same disk, all I get is failures, 'No Additional Sense' I have attached the log file to help, hopefully someone can before I trust it to burn to BD-R DL and stop me getting expensive coasters. I am using TDK discs, but am awaiting Verbatim media in case it is the discs! ImgBurn.log Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 8, 2013 Share Posted December 8, 2013 That error (or lack or real error) is usually caused by the driver for the controller the drive is attached to. Right click the drive drop down selection box when you're in 'Write' mode and click 'Family Tree'. Close the prompt and then copy + paste everything from the Log window. Link to comment Share on other sites More sharing options...
JBMouse Posted December 8, 2013 Author Share Posted December 8, 2013 Thanks for the response. I have attached the log file for the family tree. I did burn successfully the first time the re writeable was formatted, but not since! Hope this helps ImgBurnFam Tree.log Link to comment Share on other sites More sharing options...
Recommended Posts