loukas77 Posted February 15, 2014 Posted February 15, 2014 (edited) Hello guys, I've been using imgburn happily for the past 6 years. Today I wanted to burn a Wii game I used to love but lost a long time ago. So I oppened up my most trusted burn program, followed the normal procedure but after trying to burn it... This happened: I have no Idea what to do, I tried with different DVD disks, but the same error occured. Here's the log: ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Σάββατο, 15 Φεβρουάριος 2014, 19:21:26 ; \\****************************************// ; ; I 19:16:01 ImgBurn Version 2.5.8.0 started! I 19:16:01 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 19:16:01 Total Physical Memory: 8.334.008 KiB - Available: 5.388.828 KiB I 19:16:01 Initialising SPTI... I 19:16:01 Searching for SCSI / ATAPI devices... I 19:16:01 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G:) (Virtual) I 19:16:01 -> Drive 2 - Info: HL-DT-ST DVDRAM GH24NS90 IN01-13 (F:) (SATA) I 19:16:01 Found 1 DVD±RW/RAM and 1 BD-ROM! I 19:16:09 Operation Started! I 19:16:09 Source File: E:\uTorrent Downloads\Games\Wii\Wario Ware Smooth Moves PAL\Wario Ware Smooth Moves.iso I 19:16:09 Source File Sectors: 2.294.912 (MODE1/2048) I 19:16:09 Source File Size: 4.699.979.776 bytes I 19:16:09 Source File Volume Identifier: WarioWare: Smooth Moves I 19:16:09 Source File File System(s): Special I 19:16:09 Destination Device: [3:0:0] HL-DT-ST DVDRAM GH24NS90 IN01 (F:) (SATA) I 19:16:09 Destination Media Type: DVD-R (Disc ID: UME02) I 19:16:09 Destination Media Supported Write Speeds: 8x; 16x I 19:16:09 Destination Media Sectors: 2.298.496 I 19:16:10 Write Mode: DVD I 19:16:10 Write Type: DAO I 19:16:10 Write Speed: 1x I 19:16:10 Link Size: Auto I 19:16:10 Lock Volume: Yes I 19:16:10 Test Mode: Yes I 19:16:10 OPC: No I 19:16:10 BURN-Proof: Enabled W 19:16:10 Write Speed Miscompare! - Wanted: 1.385 KB/s (1x), Got: 11.080 KB/s (8x) W 19:16:10 The drive only supports writing these discs at 8x; 16x. I 19:16:10 Filling Buffer... (80 MiB) I 19:16:11 Writing LeadIn... I 19:16:30 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 19:16:30 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) W 19:16:30 Failed to Write Sectors 2368 - 2399 - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:16:30 Retrying (1 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (2 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (3 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (4 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (5 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (6 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (7 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (8 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (9 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (10 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (11 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (12 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (13 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (14 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (15 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (16 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (17 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (18 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (19 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write W 19:16:31 Retrying (20 of 20)... W 19:16:31 Retry Failed - Reason: Invalid Address For Write E 19:18:36 Failed to Write Sectors 2368 - 2399 - Reason: Power On, Reset, or Bus Device Reset Occurred E 19:18:36 Next Writable Address: 0 I 19:18:36 Synchronising Cache... W 19:18:38 User opted to skip the 'Close Track/Session/Disc' functions. I 19:18:38 Cycling Tray after Test Write... E 19:18:44 Failed to Write Image! I 19:18:44 Exporting Graph Data... I 19:18:44 Graph Data File: C:\Users\Loukas\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH24NS90_IN01_ΣΆΒΒΑΤΟ-15-ΦΕΒΡΟΥΆΡΙΟς-2014_7-16_μμ_UME02_1x.ibg I 19:18:44 Export Successfully Completed! E 19:18:44 Operation Failed! - Duration: 00:02:34 I 19:18:44 Average Write Rate: 37 KiB/s (0.0x) - Maximum Write Rate: 37 KiB/s (0.0x) I 19:21:25 Close Request Acknowledged I 19:21:25 Closing Down... I 19:21:26 Shutting down SPTI... I 19:21:26 ImgBurn closed! There are 3 more entries but they contain the same data, as I was trying to burn the same ISO. The same error also popped up when I tried burning another ISO. SO what's the problem here? Is my DVD drive broken? (it reads fine, but on burn I get this) Thank you! Edited February 15, 2014 by loukas77
LIGHTNING UK! Posted February 16, 2014 Posted February 16, 2014 Do you have any decent discs you can test with? 'UME02' are low quality.
loukas77 Posted February 16, 2014 Author Posted February 16, 2014 Do you have any decent discs you can test with? 'UME02' are low quality. Thanks for your reply. I had some DVD-RW lying around, so I tried with them. The same error. Here's the log: ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Κυριακή, 16 Φεβρουάριος 2014, 19:16:31 ; \\****************************************// ; ; I 19:15:18 ImgBurn Version 2.5.8.0 started! I 19:15:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 19:15:18 Total Physical Memory: 8.334.008 KiB - Available: 972.808 KiB I 19:15:18 Initialising SPTI... I 19:15:18 Searching for SCSI / ATAPI devices... I 19:15:18 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G:) (Virtual) I 19:15:19 -> Drive 2 - Info: HL-DT-ST DVDRAM GH24NS90 IN01-13 (F:) (SATA) I 19:15:19 Found 1 DVD±RW/RAM and 1 BD-ROM! I 19:15:40 Operation Started! I 19:15:40 Source File: E:\uTorrent Downloads\Games\Wii\Wario Ware Smooth Moves PAL\Wario Ware Smooth Moves.iso I 19:15:40 Source File Sectors: 2.294.912 (MODE1/2048) I 19:15:40 Source File Size: 4.699.979.776 bytes I 19:15:40 Source File Volume Identifier: WarioWare: Smooth Moves I 19:15:40 Source File File System(s): Special I 19:15:40 Destination Device: [3:0:0] HL-DT-ST DVDRAM GH24NS90 IN01 (F:) (SATA) I 19:15:40 Destination Media Type: DVD-RW (Disc ID: OPTODISCW002) I 19:15:40 Destination Media Supported Write Speeds: 2x I 19:15:40 Destination Media Sectors: 2.297.888 I 19:15:40 Write Mode: DVD I 19:15:40 Write Type: DAO I 19:15:40 Write Speed: 1x I 19:15:40 Link Size: Auto I 19:15:40 Lock Volume: Yes I 19:15:40 Test Mode: Yes I 19:15:40 OPC: No I 19:15:40 BURN-Proof: Enabled W 19:15:40 Write Speed Miscompare! - Wanted: 1.385 KB/s (1x), Got: 2.770 KB/s (2x) W 19:15:40 The drive only supports writing these discs at 2x. I 19:15:41 Filling Buffer... (80 MiB) I 19:15:41 Writing LeadIn... W 19:15:42 Failed to Write Sectors 0 - 31 - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:15:42 Retrying (1 of 20)... I 19:15:42 Writing LeadIn... W 19:15:42 Failed to Write Sectors 128 - 159 - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:15:42 Retrying (1 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (2 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (3 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (4 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (5 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (6 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (7 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (8 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (9 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (10 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (11 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (12 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (13 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (14 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (15 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (16 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (17 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (18 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (19 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write W 19:15:42 Retrying (20 of 20)... W 19:15:42 Retry Failed - Reason: Invalid Address For Write E 19:15:54 Failed to Write Sectors 128 - 159 - Reason: Power On, Reset, or Bus Device Reset Occurred E 19:15:54 Next Writable Address: 0 I 19:15:54 Synchronising Cache... I 19:15:58 Cycling Tray after Test Write... E 19:16:03 Failed to Write Image! E 19:16:03 Operation Failed! - Duration: 00:00:22 I 19:16:03 Average Write Rate: 0 KiB/s (0.0x) - Maximum Write Rate: 0 KiB/s (0.0x) I 19:16:31 Close Request Acknowledged I 19:16:31 Closing Down... I 19:16:31 Shutting down SPTI... I 19:16:31 ImgBurn closed! IDK if it's better quality disk or not... If you want I'll go buy another DVD tomorow to test. However On my previous PC (I'm using a new computer) all my Wii games were burned on those UME02 disks, and they worked fine. So this might be a hardware problem with my dvd drive?
LIGHTNING UK! Posted February 16, 2014 Posted February 16, 2014 Right click the drive selection box and select 'Family Tree'. Close the prompt and then copy + paste everything from the log window. The drive seems to be erroring out and resetting itself. It could be faulty, yes. I'd check a few other things first though.
loukas77 Posted February 17, 2014 Author Posted February 17, 2014 (edited) Ok here's the "Family Tree" log: I 05:35:54 ImgBurn Version 2.5.8.0 started! I 05:35:54 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 05:35:54 Total Physical Memory: 8.334.008 KiB - Available: 5.276.036 KiB I 05:35:54 Initialising SPTI... I 05:35:54 Searching for SCSI / ATAPI devices... I 05:35:54 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G:) (Virtual) I 05:35:54 -> Drive 2 - Info: HL-DT-ST DVDRAM GH24NS90 IN01-13 (F:) (SATA) I 05:35:54 Found 1 DVD±RW/RAM and 1 BD-ROM! I 05:36:10 Device: [3:0:0] HL-DT-ST DVDRAM GH24NS90 IN01 (F:) (SATA) I 05:36:10 Family Tree: I 05:36:10 -> ACPI x64-based PC I 05:36:10 -> Σύστημα συμβατό με ACPI της Microsoft I 05:36:10 -> Δίαυλος PCI I 05:36:10 -> Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller - 1E02 (VEN_8086&DEV_1E02 - Intel - msahci - v9.3.0.1011) I 05:36:10 -> Κανάλι IDE (ATA Channel 5) I 05:36:10 -> Μονάδα CD-ROM (HL-DT-ST DVDRAM GH24NS90 ATA Device) (Channel 5, Target 0, Lun 0) I can translate anything you need, just tell me (if needed). My drive is this one if that helps. Thank you. Edited February 17, 2014 by loukas77
LIGHTNING UK! Posted February 17, 2014 Posted February 17, 2014 Try installing the latest Intel Rapid Storage Tech driver. https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23538&ProdId=2101&lang=eng&OSVersion=%0A%09%09%09%09%09%09%09%09%0A%09%09%09%09%09%09%09&DownloadType= You could also try another port / cable / power plug. If possible, try it in another machine too. If you still have problems, try booting into safe mode and see if you have the same problem. Even the rewritables you tried were a cheapo dye, ideally I'd like to see what the drive does when presented with decent Taiyo Yuden or Verbatim discs. If it fails with those too then it's probably faulty.
loukas77 Posted February 17, 2014 Author Posted February 17, 2014 (edited) Try installing the latest Intel Rapid Storage Tech driver. https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23538&ProdId=2101&lang=eng&OSVersion=%0A%09%09%09%09%09%09%09%09%0A%09%09%09%09%09%09%09&DownloadType= You could also try another port / cable / power plug. If possible, try it in another machine too. If you still have problems, try booting into safe mode and see if you have the same problem. Even the rewritables you tried were a cheapo dye, ideally I'd like to see what the drive does when presented with decent Taiyo Yuden or Verbatim discs. If it fails with those too then it's probably faulty. I have some TDK dual layer (8GB) DVD-R but I don't want to waste them. Will checking "Test mode" perform the burn without touching the actual disk? I'm Installing the drivers right now, I'll let you know my results. Also I might be able to find some verbatim dual layer ones.... EDIT: Ok. Installed the drivers, still get the error (with the cheap DVDs). I'm gonna go to my old pc now and try to burn the same ISO to a cheap DVD using my old 7 year old DVD drive and my new one, to see if the drive is actually the problem. Once I get my hands on Verbatim disks I'll tell you how that went EDIT 2: I've plugged the drive to my old pc and... wow it is actually burning the disk! (well in test mode right now, but i'm gonna burn it normally once it ends, So where does that lead us? Drive works fine on other computer even with shitty DVD-Rs. Driver problem? SATA port? I'll check the cable and port once I finish burning. EDIT 3: The disk burned perfectly and is working (the cheap DVD). I tried burning the same ISO on my pc but on a different SATA port and... Boom! It works just fine. Time to test the cable before comluding that my SATA port is busted. Final Edit: Well, seems like I now have 5 working SATA ports instead of 6... Damn. Anyway at least now I am aware of the motherboard problem. I think I'll RMA it when I'll be able to live without a PC for a month. Thank you LIGHTNING UK! for helping me, even when my problem did not even come from imgburn Keep developing this awesome program! Yet another EDIT: AND NOW IT'S WORKING FINE? WTF I am really confused. I connected an hdd to that sata port and it didn't get recognized in BIOS nor did windows boot. Now I put back the DVD to that port and it works like charm... Maybe a cable has been moved out of place? I have no idea. I'm glad everything works again. And again, thank you for all your help! Edited February 18, 2014 by loukas77
Recommended Posts