SunnyCat Posted March 28, 2014 Posted March 28, 2014 (edited) Hello. I've got a problem I can't explain at all. I've been using ImgBurn for ages and only recently (January, actually, not that recently) I start having this problem. Disk writing is just freezing in the middle - can be 2%, 40% or 96%. Roughly 1 out of 10 discs. Happens with CDs or DVDs (high quality ones). Never happened with double layer but I use them really rare. I've tried to reinstall the system, upgrade/downgrade ImgBurn (got REALLY old copies), even changed the external DVD-R!!! Still the same. At some point I've seen "Waiting for the device buffer to recover" or something like this, but can't find it in any log now. Here is the latest log I 14:47:52 ImgBurn Version 2.5.8.0 started! I 14:47:52 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 14:47:52 Total Physical Memory: 8,322,232 KiB - Available: 5,440,024 KiB I 14:47:52 Initialising SPTI... I 14:47:52 Searching for SCSI / ATAPI devices... I 14:47:53 -> Drive 1 - Info: MATSHITA BD-MLT UJ240AS 1.20 (E:) (ATA) I 14:47:53 -> Drive 2 - Info: HP BD Writer bd335e YH22 (I:) (USB 2.0) I 14:47:53 Found 2 BD-REs! I 14:49:03 Operation Started! I 14:49:03 Source File: ***.cue I 14:49:03 Source File Sectors: 341,914 (AUDIO/2352) I 14:49:03 Source File Size: 804,181,728 bytes I 14:49:03 Source File File System(s): None I 14:49:03 Destination Device: [0:0:0] HP BD Writer bd335e YH22 (I:) (USB) I 14:49:03 Destination Media Type: CD-R (Disc ID: 97m15s17f, Ritek Co.) I 14:49:03 Destination Media Supported Write Speeds: 16x, 24x, 32x, 40x, 48x I 14:49:03 Destination Media Sectors: 359,843 I 14:49:03 Write Mode: CD I 14:49:03 Write Type: SAO I 14:49:03 Write Speed: MAX I 14:49:03 Lock Volume: Yes I 14:49:03 Test Mode: No I 14:49:03 OPC: No I 14:49:03 BURN-Proof: Enabled I 14:49:05 Write Speed Successfully Set! - Effective: 8,468 KB/s (48x) I 14:49:05 Filling Buffer... (80 MiB) I 14:49:05 Writing LeadIn... I 14:49:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 341913) I 14:49:27 Writing Track 1 of 1... (AUDIO/2352, LBA: 0 - 341913) Now it's 15.28 and is still sitting on 24%. Works all right on laptop! Please help, thank you for your assistance! SC Edited March 28, 2014 by SunnyCat
LIGHTNING UK! Posted March 29, 2014 Posted March 29, 2014 Your device must have stopped processing commands. Try another cable / USB socket etc. if you unplug the drive once it has got itself in that state, I expect ImgBurn will throw up an error. It hasn't frozen, it's just waiting for your drive (or system as a whole) to finish processing the command it sent.
Recommended Posts