Kepler-186f Posted April 19, 2014 Posted April 19, 2014 (edited) Hi, i have a very BIG problem with ImgBurn 2.5.8.0 and my Os Windows 8.1 Enterprise X64, after install Imgburn NOT recognize any support (i use Liteon iHas 624 Burnermax Firmware) i cannot burning any support, if I close does not close i have to use task manager and force close. If restart imgbrun this not find any device.... Before i used imgburn 2580 with Windows 8.0 and I've never had this problem, but with Windows 8.1 can not solve the problem, also after a few minutes frezze my pc and forces me to restart a windows session. I try previous versions of imgburn like Version 2.5.7.0 and 2.5.6.0 the problem is identical. How to fix this problem??? P.s. i not have any log session Edited April 19, 2014 by Kepler-186f
LIGHTNING UK! Posted April 19, 2014 Posted April 19, 2014 It looks like controller / driver issue to me.
Kepler-186f Posted April 21, 2014 Author Posted April 21, 2014 It looks like controller / driver issue to me. Some other idea? I I changed the controller from AHCI to IDE mode, but problem ramain. Imgburn 2.5.8.0 is compatible with Windows 8.1 X64 ?
LIGHTNING UK! Posted April 22, 2014 Posted April 22, 2014 Yes, it works fine. What controller is it attached to? If you can get into write mode, right click the drive selection box and select 'family tree'. Close the prompt that comes up and try to copy + paste everything from the log window. You might like to boot into safe mode and see if it works that way.
Kepler-186f Posted April 23, 2014 Author Posted April 23, 2014 I use maiboard Asus Sabertooth 990FX If insert a blank dvd, cannot burn (taste is disabled)
LIGHTNING UK! Posted April 23, 2014 Posted April 23, 2014 Try attaching it to the actual mainboard sata controller and not the jmicron one. If you must use the jmicron one, try it in ahci mode and install the latest driver from here... ftp://driver.jmicron.com.tw/SATA_Controller/Windows/
Recommended Posts