seajunk Posted May 15, 2014 Share Posted May 15, 2014 I wanted share an experience rather than looking for any particular resolution. Ive been running imgburn on a Win 8.0 machine for some time. After upgrading to 8.1, i'll get verification errors while burning an image almost immediately when the verify pass starts. If i choose 'no, dont continue verifying the disk', imgburn hangs. The disk is locked in the drive at this point, i cant eject, or close imgburn. I can 'end' the process but the disk is still locked. Shutting down the machine also hangs. If i hold the power button to shutdown, something invariably gets corrupted in the os and i have to restore back to 8.0, where everything is fine. i cant provide a log and i have no plans to upgrade this particular machine to 8.1 again. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 15, 2014 Share Posted May 15, 2014 It was probably due to a driver update or something that's misbehaving and that stops processing the I/O. That's why the whole machine gets stuck and can't shut down. Which controller is the drive attached to? Go into Write mode, right click the drive selection box and click 'Family Tree'. Close the message box that pops up and then copy + paste everything from the log window please. Link to comment Share on other sites More sharing options...
seajunk Posted May 16, 2014 Author Share Posted May 16, 2014 (edited) Hey there, thanks for taking an interest. Here's the family tree info I 17:53:54 ImgBurn Version 2.5.8.0 started! I 17:53:54 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200) I 17:53:54 Total Physical Memory: 16,645,632 KiB - Available: 14,479,168 KiB I 17:53:54 Initialising SPTI... I 17:53:54 Searching for SCSI / ATAPI devices... I 17:53:55 -> Drive 1 - Info: HL-DT-ST BD-RE WH10LS30 1.02-A0 (E:) (SATA) I 17:53:55 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (F:) (SCSI) I 17:53:55 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 17:54:47 Device: [0:0:0] HL-DT-ST BD-RE WH10LS30 1.02 (E:) (SATA) I 17:54:47 Family Tree: I 17:54:47 -> ACPI x64-based PC I 17:54:47 -> Microsoft ACPI-Compliant System I 17:54:47 -> PCI Express Root Complex I 17:54:47 -> Intel® 7 Series/C216 Chipset Family SATA AHCI Controller (VEN_8086&DEV_1E02 - Intel - iaStorA - v11.6.1.1001) I 17:54:47 -> CD-ROM Drive (HL-DT-ST BD-RE WH10LS30) (Bus Number 1, Target Id 0, LUN 0) Now your'e making me think i should have tried the latest intel irst driver after the upgrade. Edited May 16, 2014 by seajunk Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 16, 2014 Share Posted May 16, 2014 Indeed, you most definitely should have done. Link to comment Share on other sites More sharing options...
Recommended Posts