shadywaize Posted June 5, 2014 Posted June 5, 2014 Hi, my apologies if there is another thread that already has the solution to my problem. Below, you can see the printscreen and the log from the project i was trying to complete. As you can see, the error occured at 99% and continues to do so everytime i've tried. This is my first time posting on a forum, please excuse me for not knowing how to proceed. If there is anyone that can guide me through getting my issue(s) corrected, I would greatly appreciated. I'm at my wits end, and before I go totally crazy, I thought i'd ask someone for help. PLEASE HELP!!!!!!!!! i'm not sure how i would receive the response, but if possible please contact by email if necessary (majmal26@yahoo.com) Thanks in advance AJ ImgBurn LOG - I 19:07:05 ImgBurn Version 2.5.8.0 started!I 19:07:05 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)I 19:07:05 Total Physical Memory: 8,124,784 KiB - Available: 6,453,496 KiBI 19:07:05 Initialising SPTI...I 19:07:05 Searching for SCSI / ATAPI devices...I 19:07:05 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-D633A D200 (E:) (ATA)I 19:07:05 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-H44L SB02-01 (F:) (USB 2.0)I 19:07:05 Found 2 DVD±RW/RAMs!I 19:09:49 Operation Started!I 19:09:49 Source File: C:\Users\Shadywaize26\Desktop\Nissan Navigation System 2014 Map Update DVD version 7.9\Nissan Navigation System 2014 Map Update DVD version 7.9.mdsI 19:09:49 Source File Sectors: 3,982,208 (MODE1/2048)I 19:09:49 Source File Size: 8,155,561,984 bytesI 19:09:49 Source File Volume Set Identifier: 42ce24c3I 19:09:49 Source File Implementation Identifier: SONY DISC TEC.I 19:09:49 Source File File System(s): ISO9660, UDF (1.02)I 19:09:49 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-H44L SB02 (F:) (USB)I 19:09:49 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)I 19:09:49 Destination Media Supported Write Speeds: 2.4x, 4xI 19:09:49 Destination Media Sectors: 4,173,824I 19:09:49 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)I 19:09:49 Write Mode: DVDI 19:09:49 Write Type: DAOI 19:09:49 Write Speed: MAXI 19:09:49 DVD+R DL Reserve Track: NoI 19:09:49 Link Size: AutoI 19:09:49 Lock Volume: YesI 19:09:49 Test Mode: NoI 19:09:49 OPC: NoI 19:09:49 BURN-Proof: EnabledI 19:09:50 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)I 19:09:50 Book Type Setting: DVD-ROMI 19:09:50 Optimal L0 Data Zone Capacity: 1,991,104I 19:09:50 Optimal L0 Data Zone Method: ECC Block BoundaryI 19:10:12 Set L0 Data Zone Capacity Succeeded!I 19:10:12 L0 Data Zone Capacity - Effective: 1,991,104I 19:10:13 Filling Buffer... (80 MiB)I 19:10:14 Writing LeadIn...I 19:10:15 Writing Session 1 of 1... (1 Track, LBA: 0 - 3982207)I 19:10:15 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3982207)I 19:10:15 Writing Layer 0... (LBA: 0 - 1991103)I 19:30:40 Writing Layer 1... (LBA: 1991104 - 3982207)W 19:52:29 Failed to read from file: Nissan Navigation System 2014 Map Update DVD version 7.9.isoW 19:52:29 Reason: The request could not be performed because of an I/O device error.W 19:57:56 Failed to read from file: Nissan Navigation System 2014 Map Update DVD version 7.9.isoW 19:57:56 Reason: The request could not be performed because of an I/O device error. Image to Dvd Error.doc
LIGHTNING UK! Posted June 5, 2014 Posted June 5, 2014 It looks like there's something wrong with your 'C:' drive. The file you're trying to burn is unreadable. Run chkdsk on the drive and have it scan for bad sectors.
Recommended Posts