ectweak Posted August 16, 2014 Share Posted August 16, 2014 (edited) Hello, I attempted to burn a BD-RE DL from TDK today (Model BEV50HCPWA3A). I performed the Full Erase that ImgBurn requires, however at 95%, it stalled, returning the following. ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Friday, 15 August 2014, 18:46:55 ; \\****************************************// ; ; I 15:31:45 ImgBurn Version 2.5.8.0 started! I 15:31:45 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 15:31:45 Total Physical Memory: 16,726,964 KiB - Available: 8,409,352 KiB W 15:31:45 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 15:31:45 Initialising SPTI... I 15:31:45 Searching for SCSI / ATAPI devices... I 15:31:46 -> Drive 1 - Info: HL-DT-ST BD-RE BH08LS20 2.00-01 (D:) (SATA) I 15:31:46 Found 1 BD-RE! I 15:32:21 Operation Started! I 15:32:21 Device: [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 15:32:21 Media Type: BD-RE (Disc ID: TDKBLD-Wfa-000) I 15:32:21 Media Supported Write Speeds: 2x I 15:32:21 Quick Erase: No I 15:32:21 Format Properly: Yes I 15:32:21 Format Size: Preferred I 15:32:21 Format With Full Certification: Yes I 15:32:21 Format Without Spare Areas: Yes I 15:32:21 Erasing Disc... W 18:27:36 I/O Interface 'Debug Mode' has been Enabled! I 18:27:37 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:37 CDB: 00 00 00 00 00 00 I 18:27:37 CDB Interpretation: Test Unit Ready E 18:27:37 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:37 SENSE SK Interpretation: Not Ready E 18:27:37 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:38 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:39 CDB: 00 00 00 00 00 00 I 18:27:39 CDB Interpretation: Test Unit Ready E 18:27:39 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:39 SENSE SK Interpretation: Not Ready E 18:27:39 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:40 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:40 CDB: 00 00 00 00 00 00 I 18:27:40 CDB Interpretation: Test Unit Ready E 18:27:40 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:40 SENSE SK Interpretation: Not Ready E 18:27:40 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:41 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:41 CDB: 00 00 00 00 00 00 I 18:27:41 CDB Interpretation: Test Unit Ready E 18:27:41 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:41 SENSE SK Interpretation: Not Ready E 18:27:41 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:42 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:42 CDB: 00 00 00 00 00 00 I 18:27:42 CDB Interpretation: Test Unit Ready E 18:27:42 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:42 SENSE SK Interpretation: Not Ready E 18:27:42 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:43 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:43 CDB: 00 00 00 00 00 00 I 18:27:43 CDB Interpretation: Test Unit Ready E 18:27:43 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:43 SENSE SK Interpretation: Not Ready E 18:27:43 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:44 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:44 CDB: 00 00 00 00 00 00 I 18:27:44 CDB Interpretation: Test Unit Ready E 18:27:44 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:44 SENSE SK Interpretation: Not Ready E 18:27:44 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:45 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:45 CDB: 00 00 00 00 00 00 I 18:27:45 CDB Interpretation: Test Unit Ready E 18:27:45 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:45 SENSE SK Interpretation: Not Ready E 18:27:45 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:46 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:46 CDB: 00 00 00 00 00 00 I 18:27:46 CDB Interpretation: Test Unit Ready E 18:27:46 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:46 SENSE SK Interpretation: Not Ready E 18:27:46 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:47 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:47 CDB: 00 00 00 00 00 00 I 18:27:47 CDB Interpretation: Test Unit Ready E 18:27:47 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:47 SENSE SK Interpretation: Not Ready E 18:27:47 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:48 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:48 CDB: 00 00 00 00 00 00 I 18:27:48 CDB Interpretation: Test Unit Ready E 18:27:48 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:48 SENSE SK Interpretation: Not Ready E 18:27:48 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:49 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:49 CDB: 00 00 00 00 00 00 I 18:27:49 CDB Interpretation: Test Unit Ready E 18:27:49 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:49 SENSE SK Interpretation: Not Ready E 18:27:49 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:50 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:50 CDB: 00 00 00 00 00 00 I 18:27:50 CDB Interpretation: Test Unit Ready E 18:27:50 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:50 SENSE SK Interpretation: Not Ready E 18:27:50 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:51 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:51 CDB: 00 00 00 00 00 00 I 18:27:51 CDB Interpretation: Test Unit Ready E 18:27:51 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:51 SENSE SK Interpretation: Not Ready E 18:27:51 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:52 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:52 CDB: 00 00 00 00 00 00 I 18:27:52 CDB Interpretation: Test Unit Ready E 18:27:52 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:52 SENSE SK Interpretation: Not Ready E 18:27:52 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:53 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:53 CDB: 00 00 00 00 00 00 I 18:27:53 CDB Interpretation: Test Unit Ready E 18:27:53 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:53 SENSE SK Interpretation: Not Ready E 18:27:53 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:54 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:54 CDB: 00 00 00 00 00 00 I 18:27:54 CDB Interpretation: Test Unit Ready E 18:27:54 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:54 SENSE SK Interpretation: Not Ready E 18:27:54 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:55 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:55 CDB: 00 00 00 00 00 00 I 18:27:55 CDB Interpretation: Test Unit Ready E 18:27:55 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:55 SENSE SK Interpretation: Not Ready E 18:27:55 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:56 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:56 CDB: 00 00 00 00 00 00 I 18:27:56 CDB Interpretation: Test Unit Ready E 18:27:56 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:56 SENSE SK Interpretation: Not Ready E 18:27:56 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:57 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:57 CDB: 00 00 00 00 00 00 I 18:27:57 CDB Interpretation: Test Unit Ready E 18:27:57 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:57 SENSE SK Interpretation: Not Ready E 18:27:57 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:58 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:58 CDB: 00 00 00 00 00 00 I 18:27:58 CDB Interpretation: Test Unit Ready E 18:27:58 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:58 SENSE SK Interpretation: Not Ready E 18:27:58 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:27:59 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:27:59 CDB: 00 00 00 00 00 00 I 18:27:59 CDB Interpretation: Test Unit Ready E 18:27:59 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:27:59 SENSE SK Interpretation: Not Ready E 18:27:59 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:28:00 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:28:00 CDB: 00 00 00 00 00 00 I 18:28:00 CDB Interpretation: Test Unit Ready E 18:28:00 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:28:00 SENSE SK Interpretation: Not Ready E 18:28:00 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:28:01 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:28:01 CDB: 00 00 00 00 00 00 I 18:28:01 CDB Interpretation: Test Unit Ready E 18:28:01 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:28:01 SENSE SK Interpretation: Not Ready E 18:28:01 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% W 18:28:02 I/O Interface 'Debug Mode' has been Disabled! W 18:31:48 I/O Interface 'Debug Mode' has been Enabled! I 18:31:48 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:31:48 CDB: 00 00 00 00 00 00 I 18:31:48 CDB Interpretation: Test Unit Ready E 18:31:48 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:31:48 SENSE SK Interpretation: Not Ready E 18:31:48 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:31:49 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:31:49 CDB: 00 00 00 00 00 00 I 18:31:49 CDB Interpretation: Test Unit Ready E 18:31:49 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:31:49 SENSE SK Interpretation: Not Ready E 18:31:49 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:31:50 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:31:51 CDB: 00 00 00 00 00 00 I 18:31:51 CDB Interpretation: Test Unit Ready E 18:31:51 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:31:51 SENSE SK Interpretation: Not Ready E 18:31:51 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% I 18:31:52 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 18:31:52 CDB: 00 00 00 00 00 00 I 18:31:52 CDB Interpretation: Test Unit Ready E 18:31:52 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B E 18:31:52 SENSE SK Interpretation: Not Ready E 18:31:52 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95% W 18:31:52 I/O Interface 'Debug Mode' has been Disabled! I restarted my PC, and am currently attempting to erase the disc again. I have noticed that it returns I 19:33:44 [0:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (SATA) I 19:33:44 CDB: 00 00 00 00 00 00 I 19:33:44 CDB Interpretation: Test Unit Ready E 19:33:44 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 1F 5D E 19:33:44 SENSE SK Interpretation: Not Ready E 19:33:44 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 12% but continues to increase in percentage of completion. am I just being impatient at the 95% hang, or is there something else that may be going on? Edit: Information from the "Write" screen of Imgburn HL-DT-ST BD-RE BH08LS20 2.00 (SATA) Current Profile: BD-RE Disc Information: Status: Empty State of Last Session: Empty Erasable: Yes MID: TDKBLD-Wfa-000 Supported Write Speeds: 2x BD Disc Information (L0): Disc ID: TDKBLD-Wfa-000 Disc Type: BD-RE Disc Size: 120 mm Disc Class: 0 Disc Version: 2 Number of Layers: 2 Layer Type: Rewritable DVD Layer Present: No CD Layer Present: No Channel Bit Length: 74.50 nm (25 GB Per Layer) BCA Present: Yes Maximum Transfer Rate: Not Specified First PAA of Data Zone: 131,072 Last PAA of Data Zone: 1,658,494 BD Disc Information (L1): Disc ID: TDKBLD-Wfa-000 Disc Type: BD-RE Disc Size: 120 mm Disc Class: 0 Disc Version: 2 Number of Layers: 2 Layer Type: Rewritable DVD Layer Present: No CD Layer Present: No Channel Bit Length: 74.50 nm (25 GB Per Layer) BCA Present: Yes Maximum Transfer Rate: Not Specified First PAA of Data Zone: 2,535,808 Last PAA of Data Zone: 4,063,230 Format Capacities: DT: 0x01 - NB: 24438784 (0x0174E800) - TDP: 36864 FT: 0x00 - NB: 23652352 (0x0168E800) - TDP: 24576 FT: 0x01 - NB: 23259136 (0x0162E800) - TDP: 2048 FT: 0x30 - NB: 23652352 (0x0168E800) - TDP: 24576 FT: 0x30 - NB: 23259136 (0x0162E800) - TDP: 36864 FT: 0x30 - NB: 24307712 (0x0172E800) - TDP: 4096 FT: 0x31 - NB: 24438784 (0x0174E800) - TDP: 2048 Performance (Write Speed): Descriptor 1... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 24438783 (0x0174E7FF) -> RS: 8,928 KB/s (2x) - WS: 8,991 KB/s (2x) Family Tree Information I 23:41:53 Family Tree: I 23:41:53 -> ACPI x64-based PC I 23:41:53 -> Microsoft ACPI-Compliant System I 23:41:53 -> PCI bus I 23:41:53 -> Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller - 1E02 (VEN_8086&DEV_1E02 - Intel - msahci - v9.3.0.1011) I 23:41:53 -> IDE Channel (ATA Channel 1) I 23:41:53 -> CD-ROM Drive (HL-DT-ST BD-RE BH08LS20 ATA Device) (Channel 1, Target 0, Lun 0) Edit 2: Hmm, I just noticed there was a firmware checker built into ImgBurn... and here I am thinking the one on LG's website was the newest... attempting that now Edited August 16, 2014 by ectweak Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 16, 2014 Share Posted August 16, 2014 The drive is in complete control when doing that stage of the erase and it returns the % complete values. If it's getting stuck, it must be having an issue with the disc you're using. The firmware update may help... or it may not. Link to comment Share on other sites More sharing options...
ectweak Posted August 16, 2014 Author Share Posted August 16, 2014 It appears that the firmware update did help... I figured it was a drive thing, but I appreciate your reply anyhow. Link to comment Share on other sites More sharing options...
Recommended Posts