harpsm Posted September 6, 2014 Share Posted September 6, 2014 I have a new (refurb) Acer desktop and I haven't been able to burn any DVDs successfully, though it has been able to read CDs. The first two times I tried to burn, the process started but then failed partway through. One of those times, I got the I/O error. Now it won't get past the "Initialising Device" message. I ran the debug mode reg edit and here is my log (there was no disc on the drive when I started imgburn): I 11:54:32 ImgBurn Version 2.5.8.0 started! I 11:54:32 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200) I 11:54:32 Total Physical Memory: 4,079,740 KiB - Available: 1,930,144 KiB W 11:54:32 I/O Interface 'Debug Mode' Enabled! I 11:54:32 Initialising SPTI... I 11:54:32 Searching for SCSI / ATAPI devices... I 11:54:32 Initialising Device (\\?\scsi#cdrom&ven_hl-dt-st&prod_dvdram_ghb0n#4&d743aa&0&010000#{53f56308-b6bf-11d0-94f2-00a0c91efb8b})... At this point, imgburn is completely hung and can only be closed by forcing close in Task Manager. Any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 6, 2014 Share Posted September 6, 2014 What is the message in the status bar when it's stuck (and with debug mode enabled) ? Try booting into safe mode and see if it does the same thing. Link to comment Share on other sites More sharing options...
harpsm Posted September 18, 2014 Author Share Posted September 18, 2014 What is the message in the status bar when it's stuck (and with debug mode enabled) ? Try booting into safe mode and see if it does the same thing. Sorry it took me so long to reply. When I rebooted into safe mode, my monitor no longer recognized any video signal from my computer (which seems to make the term "safe mode" a bit ironic), and it took some time to sort out that problem. Anyway, once I finally got into safe mode, I was able to burn a DVD .img file with no problem. Regarding your first question, the log I posted in my OP shows everything in the log in debug mode, from program startup all the way until it gets hung up. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 19, 2014 Share Posted September 19, 2014 The status bar messages are different to the log messages, that's why I asked what the message in the status bar was. As it's fine in safe mode, it must be driver related and something else you've installed is causing the problem. Have a look at the filter drivers feature in the tools menu and see if any are listed. Link to comment Share on other sites More sharing options...
Recommended Posts