jovancha Posted October 20, 2014 Posted October 20, 2014 Hello, when I use imgburn to write Blu-ray video disk from folder or ISO image at the beginning of the recording prompts "Failed to Write Sectors 0 - 31 - Reason: Write Error" and keep records. At the end of the recording prompts "Operation Successfully Completed" but the verification report an error. The same happens with Verbatim and Mediarange discs. Do you have any idea what went here wrong? Thank you! My logs: I 18:10:19 ImgBurn Version 2.5.8.0 started! I 18:10:19 Microsoft Windows 7 Professional Edition (6.1, Build 7601 : Service Pack 1) I 18:10:19 Total Physical Memory: 3.275.960 KiB - Available: 1.926.596 KiB I 18:10:19 Initialising SPTI... I 18:10:19 Searching for SCSI / ATAPI devices... I 18:10:19 -> Drive 1 - Info: DTSOFT BDROM 1.05 (J:) (Virtual) I 18:10:19 -> Drive 2 - Info: HL-DT-ST BD-RE BH16NS40 1.03-A0 (F:) (ATA) I 18:10:20 -> Drive 3 - Info: PIONEER DVD-RW DVR-110D 1.41-GENERAL (G:) (ATA) I 18:10:20 Found 1 DVD±RW, 1 BD-ROM and 1 BD-RE XL! I 18:12:46 Operation Started! I 18:12:46 Building Image Tree... I 18:12:58 Corrected file system selection for Blu-ray Video disc. I 18:12:58 Corrected UDF revision selection for Blu-ray Video disc. I 18:12:58 Calculating Totals... I 18:12:58 Preparing Image... I 18:12:58 Contents: 452 Files, 25 Folders I 18:12:58 Content Type: BD Video I 18:12:58 Data Type: MODE1/2048 I 18:12:58 File System(s): UDF (2.50) I 18:12:58 Volume Label: [Not Configured] I 18:12:58 Size: 24.897.684.677 bytes I 18:12:58 Sectors: 12.157.398 I 18:12:58 Image Size: 24.901.189.632 bytes I 18:12:58 Image Sectors: 12.158.784 I 18:12:58 Operation Successfully Completed! - Duration: 00:00:12 I 18:15:10 Operation Started! I 18:15:11 Building Image Tree... I 18:15:11 Calculating Totals... I 18:15:11 Preparing Image... I 18:15:11 Contents: 452 Files, 25 Folders I 18:15:11 Content Type: BD Video I 18:15:11 Data Type: MODE1/2048 I 18:15:11 File System(s): UDF (2.50) I 18:15:11 Volume Label: MOVIE I 18:15:11 Size: 24.897.684.677 bytes I 18:15:11 Sectors: 12.157.398 I 18:15:11 Image Size: 24.901.189.632 bytes I 18:15:11 Image Sectors: 12.158.784 I 18:15:19 Operation Successfully Completed! - Duration: 00:00:08 I 18:15:19 Operation Started! I 18:15:19 Source File: -==/\/[bUILD IMAGE]\/\==- I 18:15:19 Source File Sectors: 12.158.784 (MODE1/2048) I 18:15:19 Source File Size: 24.901.189.632 bytes I 18:15:19 Source File Volume Identifier: MOVIE I 18:15:19 Source File Volume Set Identifier: 455491E500B98516 I 18:15:19 Source File Application Identifier: ImgBurn v2.5.8.0 I 18:15:19 Source File Implementation Identifier: ImgBurn I 18:15:19 Source File File System(s): UDF (2.50) I 18:15:19 Destination Device: [3:1:0] HL-DT-ST BD-RE BH16NS40 1.03 (F:) (ATA) I 18:15:19 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000) I 18:15:19 Destination Media Supported Write Speeds: 4x; 6x; 8x; 10x; 12x I 18:15:19 Destination Media Sectors: 12.219.392 I 18:15:19 Write Mode: BD I 18:15:19 Write Type: DAO I 18:15:19 Write Speed: 4x I 18:15:19 Hardware Defect Management Active: No I 18:15:19 BD-R Verify Not Required: Yes I 18:15:19 Link Size: Auto I 18:15:19 Lock Volume: Yes I 18:15:19 Test Mode: No I 18:15:19 OPC: No I 18:15:19 BURN-Proof: Enabled I 18:15:19 Write Speed Successfully Set! - Effective: 17.984 KB/s (4x) I 18:15:26 Filling Buffer... (80 MiB) I 18:15:28 Writing LeadIn... W 18:15:32 Failed to Write Sectors 0 - 31 - Reason: Write Error W 18:15:32 Retrying (1 of 20)... I 18:15:34 Writing LeadIn... I 18:15:34 Writing Session 1 of 1... (1 Track, LBA: 0 - 12158783) I 18:15:34 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12158783) I 18:38:50 Synchronising Cache... I 18:38:53 Closing Track... I 18:38:54 Finalising Disc... I 18:39:09 Exporting Graph Data... I 18:39:10 Graph Data File: C:\Users\Dragan\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH16NS40_1.03_20-OKTOBAR-2014_18-15_CMCMAG-BA5-000_4x.ibg I 18:39:10 Export Successfully Completed! I 18:39:10 Operation Successfully Completed! - Duration: 00:23:50 I 18:39:10 Average Write Rate: 17.431 KiB/s (4.0x) - Maximum Write Rate: 17.681 KiB/s (4.0x) I 18:39:10 Cycling Tray before Verify... W 18:39:24 Waiting for device to become ready... I 18:39:38 Device Ready! E 18:39:38 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0) E 18:39:38 Verify Failed! - Reason: Layouts do not match.
LIGHTNING UK! Posted October 20, 2014 Posted October 20, 2014 Your drive appears to have issues with burning those discs. That could just be at 4x, or it may not really like them at all. You could try enabling the 'Perform OPC Before Write' option in the settings on the 'Write' tab to see if that makes a difference. Failing that, buy some disc using a different MID/dye (not more 'CMCMAG-BA5-000' ones).
Recommended Posts