Fails to erase the BD disk

[mbo]

Hi,

as in subject, it gets write error at about 4% and just hangs up. The burner activity stops at this point.

I was able to erase the same media in DVD Architect with no problems.

Please see the log below.

Thanks

 

 

I 11:25:57 Found 1 BD-ROM/HD DVD-ROM, 1 BD-ROM/HD DVD-ROM/DVD±RW and 1 BD-RE XL!

I 11:26:28 Operation Started!

I 11:26:28 Device: [0:0:0] TSSTcorp BDDVDW SE-506CB TS01 (H:) (USB)

I 11:26:28 Media Type: BD-RE (Disc ID: TDKBLD-Wfa-000)

I 11:26:28 Media Supported Write Speeds: 2x

I 11:26:28 Quick Erase: No

I 11:26:28 Format Properly: Yes

I 11:26:28 Format Size: Preferred

I 11:26:28 Format With Full Certification: Yes

I 11:26:28 Format Without Spare Areas: Yes

I 11:26:28 Erasing Disc...

I 11:27:51 Operation Successfully Completed! - Duration: 00:01:22

I 11:27:51 Operation Started!

I 11:27:51 Device: [0:0:0] TSSTcorp BDDVDW SE-506CB TS01 (H:) (USB)

I 11:27:51 Media Type: BD-RE (Disc ID: TDKBLD-Wfa-000)

I 11:27:51 Media Supported Write Speeds: 2x

I 11:27:51 Media Sectors: 24,438,784

I 11:27:51 BD-RE FastWrite: No

I 11:27:51 Zeroing Sectors...

W 11:31:27 Failed to Zero Sectors 1041248 - 1041279 - Reason: Write Error

W 11:31:27 Retrying (1 of 20)...

I 11:31:29 Zeroing Sectors...

 

[LIGHTNING UK!]

I very much doubt that other application even attempted to zero the sectors.

 

Zeroing is effectively the same as burning data to the disc (just with zeros rather than actual data) and your drive seems unable to do that... so you should expect a real write operation with real to fail too.