skoville Posted July 22, 2015 Posted July 22, 2015 (edited) Hi all, I'm trying to burn rar files to Memorex BD-R at 6 or 4x. DVDINFOPRO = RITEKBR3. I have imgburn set at UDF 2.50 and it completes stating successful. The disk is blank. Where am I going wrong? I 19:33:42 ImgBurn Version 2.5.8.0 started!I 19:33:42 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)I 19:33:42 Total Physical Memory: 33,448,460 KiB - Available: 30,579,504 KiBI 19:33:42 Initialising SPTI...I 19:33:42 Searching for SCSI / ATAPI devices...I 19:33:42 -> Drive 1 - Info: ATAPI iHAS224 B GL0A (I:) (SATA)I 19:33:43 -> Drive 2 - Info: ATAPI iHBS112 2 PL06 (G:) (SATA)I 19:33:43 -> Drive 3 - Info: HL-DT-ST BD-RE WH14NS40 1.03-A0 (H:) (SATA)I 19:33:43 Found 1 DVD±RW/RAM, 1 BD-RE and 1 BD-RE XL!I 19:38:23 Operation Started!I 19:38:23 Building Image Tree...E 19:38:27 User did not specify a volume label.E 19:38:27 Operation Aborted! - Duration: 00:00:04I 19:38:44 Operation Started!I 19:38:44 Building Image Tree...I 19:38:52 Calculating Totals...I 19:38:52 Preparing Image...I 19:38:52 Contents: 10 Files, 0 FoldersI 19:38:52 Content Type: DataI 19:38:52 Data Type: MODE1/2048I 19:38:52 File System(s): UDF (2.50)I 19:38:52 Volume Label: To BurnI 19:38:52 Size: 24,892,171,153 bytesI 19:38:52 Sectors: 12,154,385I 19:38:52 Image Size: 24,893,063,168 bytesI 19:38:52 Image Sectors: 12,154,816I 19:38:55 Operation Successfully Completed! - Duration: 00:00:10I 19:38:55 Operation Started!I 19:38:55 Source File: -==/\/[bUILD IMAGE]\/\==-I 19:38:55 Source File Sectors: 12,154,816 (MODE1/2048)I 19:38:55 Source File Size: 24,893,063,168 bytesI 19:38:55 Source File Volume Identifier: To BurnI 19:38:55 Source File Volume Set Identifier: 46F59CD600B97771I 19:38:55 Source File Application Identifier: ImgBurn v2.5.8.0I 19:38:55 Source File Implementation Identifier: ImgBurnI 19:38:55 Source File File System(s): UDF (2.50)I 19:38:55 Destination Device: [5:0:0] HL-DT-ST BD-RE WH14NS40 1.03 (H:) (SATA)I 19:38:55 Destination Media Type: BD-R (Disc ID: RITEK-BR3-000)I 19:38:55 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10xI 19:38:55 Destination Media Sectors: 12,219,392I 19:38:55 Write Mode: BDI 19:38:55 Write Type: DAOI 19:38:55 Write Speed: 4xI 19:38:55 Hardware Defect Management Active: NoI 19:38:55 BD-R Verify Not Required: YesI 19:38:55 Link Size: AutoI 19:38:55 Lock Volume: YesI 19:38:55 Test Mode: NoI 19:38:55 OPC: NoI 19:38:55 BURN-Proof: EnabledI 19:38:55 Write Speed Successfully Set! - Effective: 17,984 KB/s (4x)I 19:39:02 Filling Buffer... (80 MiB)I 19:39:03 Writing LeadIn...W 19:39:06 Failed to Write Sectors 0 - 31 - Reason: Write ErrorW 19:39:06 Retrying (1 of 20)...I 19:39:08 Writing LeadIn...I 19:39:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 12154815)I 19:39:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12154815)I 20:02:23 Synchronising Cache...I 20:02:26 Closing Track...I 20:02:27 Finalising Disc...I 20:02:52 Exporting Graph Data...I 20:02:52 Graph Data File: C:\Users\MickeyFinn\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_WH14NS40_1.03_TUESDAY-JULY-21-2015_7-38_PM_RITEK-BR3-000_4x.ibgI 20:02:52 Export Successfully Completed!I 20:02:52 Operation Successfully Completed! - Duration: 00:23:46I 20:02:52 Average Write Rate: 17,438 KiB/s (4.0x) - Maximum Write Rate: 17,690 KiB/s (4.0x) Using LG HL-DT-ST BD-RE WH14NS40 Any help?Have tried several times, different disks, even INFOMER40. (Melody, yes, ha ha) Edited July 22, 2015 by skoville
skoville Posted July 22, 2015 Author Posted July 22, 2015 Well, unless it was having "Include Archive Only" checked, it burned fine to the meager Melody disk. Thanks.
LIGHTNING UK! Posted July 22, 2015 Posted July 22, 2015 You should have let it verify. Without it, there's no way of knowing if the disc is actually readable. Drives often go through the entire burn process without erroring out, but the disc is still a coaster.
skoville Posted July 22, 2015 Author Posted July 22, 2015 Very good advice. Paintience not being my vertue, it took a lot longer to NOT use it. Thanks.
Recommended Posts