FileMike Posted July 29, 2015 Posted July 29, 2015 Hi, I burned via ImgBurn a boot cd for a windows 7 enterprise 64 bit system (as described in the imgburn guide), this means I copied the necessary files to the cd and gave the necessary information about emulation type, boot image, load segment, etc. to the imgburn tool. When I compare this cd with the "official" ms reparation cd, all files and necessary information about boot record volume, boot catalog, virtual disc are equal - there`s only an additional ISO/Joliet filesystem on the "official" cd. But when I start the system I get the following message: ---------------Boot Manager:Windows failed to start. A recent hardware of software change might be the cause. To fix the problem: 1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. --------------- The offiical reparation cd works fine. What could be the reason? Perhaps Security? Which device is inaccessible? Thanks in advance FileMike
LIGHTNING UK! Posted July 29, 2015 Posted July 29, 2015 It's a bit hard to answer that without seeing exactly what you did, what your source files were and more technical info about your machine. Is it even attempting to load from the DVD? Are you using UEFI? Why are you making another disc if you already have one that works? If you're customising it, I guess not everything is equal. Could I ask that you please post the log from the build / burn so we at least have that to look at. A screenshot of the boot image tab would help too.
FileMike Posted July 30, 2015 Author Posted July 30, 2015 Hallo, the file structure of my boot disc is equal to the official “ms win 7 rescue dvd”: My system tries to load from the dvd (the dvd led is flickering), but then the error message is on the screen. I do not use UEFI. The log: I 13:17:36 ImgBurn Version 2.5.7.0 started! I 13:17:36 Microsoft Windows 7 Enterprise x64 Edition (6.1, Build 7601 : Service Pack 1) I 13:17:36 Total Physical Memory: 8.236.800 KB - Available: 5.237.740 KB I 13:17:36 Initialising SPTI... I 13:17:36 Searching for SCSI / ATAPI devices... I 13:17:36 -> Drive 1 - Info: TSSTcorp DVD-ROM SH-116AB FT01 (E:) (ATAPI) I 13:17:37 -> Drive 2 - Info: PIONEER BD-RW BDR-205 9.03 (F:) (USB) I 13:17:37 Found 1 DVD-ROM and 1 BD-RE! I 13:20:38 Operation Started! I 13:20:38 Building Image Tree... I 13:20:38 Checking Directory Depth... I 13:20:38 Calculating Totals... I 13:20:38 Preparing Image... I 13:20:38 Checking Path Length... I 13:20:38 Contents: 5 Files, 2 Folders I 13:20:38 Content Type: Data I 13:20:38 Data Type: MODE1/2048 I 13:20:38 File System(s): UDF (1.02) (Bootable) I 13:20:38 Volume Label: ReparaturDVD I 13:20:38 Size: 174.643.320 bytes I 13:20:38 Sectors: 85.277 I 13:20:38 Image Size: 175.243.264 bytes I 13:20:38 Image Sectors: 85.568 I 13:20:38 Operation Successfully Completed! - Duration: 00:00:00 I 13:20:38 Operation Started! I 13:20:38 Source File: -==/\/[bUILD IMAGE]\/\==- I 13:20:38 Source File Sectors: 85.568 (MODE1/2048) I 13:20:38 Source File Size: 175.243.264 bytes I 13:20:38 Source File Volume Identifier: ReparaturDVD I 13:20:38 Source File Volume Set Identifier: 46FE6A9100014E32 I 13:20:38 Source File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER! I 13:20:38 Source File Implementation Identifier: ImgBurn I 13:20:38 Source File File System(s): ISO9660 (Bootable); UDF (1.02) I 13:20:38 Destination Device: [0:0:0] PIONEER BD-RW BDR-205 9.03 (F:) (USB) I 13:20:38 Destination Media Type: DVD-R (Disc ID: TYG03) I 13:20:38 Destination Media Supported Write Speeds: 4x; 6x; 8x; 12x; 16x I 13:20:38 Destination Media Sectors: 2.298.496 I 13:20:38 Write Mode: DVD I 13:20:38 Write Type: DAO I 13:20:38 Write Speed: MAX I 13:20:38 Link Size: Auto I 13:20:38 Lock Volume: Yes I 13:20:38 Test Mode: No I 13:20:38 OPC: No I 13:20:38 BURN-Proof: Disabled W 13:20:38 Write Speed Miscompare! - MODE SENSE: 22.160 KB/s (16x), GET PERFORMANCE: 16.620 KB/s (12x) I 13:20:38 Write Speed Successfully Set! - Effective: 16.620 KB/s (12x) I 13:20:38 Advanced Settings - Optimal Writing Speed: No I 13:20:39 Filling Buffer... (80 MB) I 13:20:39 Writing LeadIn... I 13:21:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 85567) I 13:21:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 85567) I 13:21:30 Synchronising Cache... I 13:22:51 Operation Successfully Completed! - Duration: 00:02:12 I 13:22:51 Average Write Rate: 9.507 KB/s (6.9x) - Maximum Write Rate: 9.930 KB/s (7.2x) I 13:22:51 Cycling Tray before Verify... I 13:23:05 Device Ready! I 13:23:06 Operation Started! I 13:23:06 Source Device: [0:0:0] PIONEER BD-RW BDR-205 9.03 (F:) (USB) I 13:23:06 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG03) I 13:23:06 Source Media Supported Write Speeds: 4x; 6x; 8x; 12x; 16x I 13:23:06 Image File: -==/\/[bUILD IMAGE]\/\==- I 13:23:06 Image File Sectors: 85.568 (MODE1/2048) I 13:23:06 Image File Size: 175.243.264 bytes I 13:23:06 Image File Volume Identifier: ReparaturDVD I 13:23:06 Image File Volume Set Identifier: 46FE6A9100014E32 I 13:23:06 Image File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER! I 13:23:06 Image File Implementation Identifier: ImgBurn I 13:23:06 Image File File System(s): ISO9660 (Bootable); UDF (1.02) I 13:23:06 Read Speed (Data/Audio): MAX / MAX I 13:23:07 Verifying Session 1 of 1... (1 Track, LBA: 0 - 85567) I 13:23:07 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 85567) I 13:23:47 Operation Successfully Completed! - Duration: 00:00:39 I 13:23:47 Average Verify Rate: 4.503 KB/s (3.3x) - Maximum Verify Rate: 5.628 KB/s (4.1x) I 13:24:54 Close Request Acknowledged I 13:24:54 Closing Down... I 13:24:55 Shutting down SPTI... I 13:24:55 ImgBurn closed! The boot catalog (@: is this the boot image tab): LBA :257 0000 : 01 00 00 00 4D 69 63 72 6F 73 6F 66 74 20 43 6F ....Microsoft Co 0010 : 72 70 6F 72 61 74 69 6F 6E 00 00 00 4C 49 55 AA rporation...LIU. 0020 : 88 00 00 00 00 00 08 00 02 01 00 00 00 00 00 00 ................ 0030 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0040 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0050 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0060 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ..........
LIGHTNING UK! Posted July 30, 2015 Posted July 30, 2015 No, I mean where you've configured the boot image options within ImgBurn.
FileMike Posted August 5, 2015 Author Posted August 5, 2015 With the "Make Image Bootable" option enabled I have: Emulation Type : None (Custom) Boot Image: C:\Windows\Boot\DVD\PCAT\etfsboot.com Developer ID: Microsoft IMAPIv2 Load Segment: 07C0 Sectors To Load: 8 Path Boot Information Table not enabled
LIGHTNING UK! Posted August 5, 2015 Posted August 5, 2015 If you have a working disc, can't you use that? I don't know why the one you're attempting to build isn't working. Copy everything off the working disc to a folder and attempt to rebuild a new disc in the same way you've been doing it. Does that work?
FileMike Posted August 11, 2015 Author Posted August 11, 2015 If you want to burn a bootable disc it is necessary to have the right burn options besides the content of the disc. So the file system should be "ISO9660 + Joilet", the ISO9660-Restrictions should "Allow Files Without Extensions", the Joliet-Restrictions should "Allow Files Without Extensions" and "Add ';1' Version Number To Files" should be checked. Now the disc boots! best greetings FileMike
Recommended Posts