eddie11013 Posted August 18, 2015 Share Posted August 18, 2015 Using Verbatim DVD+r media. Had at least 20 fails. Have a couple of logs that failed. Thanks in advance for any suggestions. ImgBurn - 1 -.log ImgBurn - 2.log Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 18, 2015 Share Posted August 18, 2015 Try all supported write speeds. Look for firmware updates for your drive. Clean the drive with a cleaning disc. Try another spindle of discs - if the ones you're using are all from the same one. Link to comment Share on other sites More sharing options...
eddie11013 Posted August 18, 2015 Author Share Posted August 18, 2015 I tried a different stack. More often then not this different stack works. But not everytime, which used to be the case. And sometimes after 'write' it just sits there, doing nothing, waiting for verify to start. I have the latest firmware. I used a disc cleaner disc. Here is another log where it just sits there and I finally aborted the process. Thanks for replying ImgBurn - 3.log Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 18, 2015 Share Posted August 18, 2015 That log was about 4 or 5 different burns wasn't it? Only the last one seemed to be taking a while for the drive to write the leadin and you aborted it. If your drive is unable to burn decent discs at any of the supported speeds and you've already tried what I've suggested, buy yourself a new drive. Link to comment Share on other sites More sharing options...
Recommended Posts