Sizzlechest Posted May 18, 2016 Posted May 18, 2016 I'm getting a dialog box at the end of a burn saying: CreateFile Failed! - Device: '\\?\usbstor#cdrom&ven_optiarc&prod_dvd_rw_ad-5280s&rev_1.z6#000000000000&0#{53f56308-b6bf-11d0-94f2-00a0c91efb8b}' I'm including the log of once such event. If I hit "retry" it will succeed after a couple attempts. The discs seems to burn fine. This just started happening and I can't think of anything that has changed recently other than perhaps a new Windows update. I'm running IMGBurn on Windows 7 Professional. ; //****************************************\\; ImgBurn Version 2.5.8.0 - Log; Tuesday, 17 May 2016, 17:23:27; \\****************************************//;;I 16:59:50 ImgBurn Version 2.5.8.0 started!I 16:59:50 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)I 16:59:50 Total Physical Memory: 6,193,436 KiB - Available: 4,045,816 KiBI 16:59:50 Initialising SPTI...I 16:59:50 Searching for SCSI / ATAPI devices...I 16:59:52 -> Drive 1 - Info: Optiarc DVD RW AD-5280S 1.Z6 (D:) (USB 2.0)I 16:59:52 -> Drive 2 - Info: Optiarc DVD RW AD-5280S 1.Z6 (J:) (USB 2.0)I 16:59:52 Found 2 DVD±RWs!I 17:00:00 Operation Started!I 17:00:00 Source File: U:\Disc Images\ACB15 TI16\ACB15 TI16 CEI 1.0 ER1\ACB15 TI16 CEI 1.0 ER1 - Disc 1 of 1 - RHEL 7.1 x86-64 with ACB15 TI16 COTS DVD.isoI 17:00:00 Source File Sectors: 2,997,808 (MODE1/2048)I 17:00:00 Source File Size: 6,139,510,784 bytesI 17:00:00 Source File Volume Identifier: RHEL-7.1 Server.I 17:00:01 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLINGI 17:00:01 Source File File System(s): ISO9660 (Bootable), JolietI 17:00:01 Destination Device: [0:0:0] Optiarc DVD RW AD-5280S 1.Z6 (D:) (USB)I 17:00:01 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)I 17:00:01 Destination Media Supported Write Speeds: 4x, 6x, 8xI 17:00:01 Destination Media Sectors: 4,173,824I 17:00:01 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)I 17:00:01 Write Mode: DVDI 17:00:01 Write Type: DAOI 17:00:01 Write Speed: MAXI 17:00:01 DVD+R DL Reserve Track: NoI 17:00:01 Link Size: AutoI 17:00:01 Lock Volume: YesI 17:00:01 Test Mode: NoI 17:00:01 OPC: NoI 17:00:01 BURN-Proof: EnabledI 17:00:01 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)I 17:00:01 Book Type Setting: DVD-ROMI 17:00:01 Optimal L0 Data Zone Capacity: 1,498,912I 17:00:01 Optimal L0 Data Zone Method: ECC Block BoundaryI 17:00:07 Set L0 Data Zone Capacity Succeeded!I 17:00:07 L0 Data Zone Capacity - Effective: 1,498,912I 17:00:07 Filling Buffer... (80 MiB)I 17:00:08 Writing LeadIn...I 17:00:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 2997807)I 17:00:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2997807)I 17:00:11 Writing Layer 0... (LBA: 0 - 1498911)I 17:07:26 Writing Layer 1... (LBA: 1498912 - 2997807)I 17:14:48 Synchronising Cache...I 17:14:49 Closing Track...I 17:15:02 Finalising Disc...I 17:15:54 Exporting Graph Data...I 17:15:54 Graph Data File: C:\Users\Pvcsadmin\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5280S_1.Z6_TUESDAY-MAY-17-2016_5-00_PM_MKM-003-00_MAX.ibgI 17:15:54 Export Successfully Completed!I 17:15:54 Operation Successfully Completed! - Duration: 00:15:53I 17:15:54 Average Write Rate: 6,844 KiB/s (5.1x) - Maximum Write Rate: 10,898 KiB/s (8.1x)I 17:15:54 Close Request AcknowledgedI 17:15:54 Closing Down...E 17:23:27 CreateFile Failed! - Device: '\\?\usbstor#cdrom&ven_optiarc&prod_dvd_rw_ad-5280s&rev_1.z6#000000000000&0#{53f56308-b6bf-11d0-94f2-00a0c91efb8b}'E 17:23:27 Reason: The system cannot find the file specified.I 17:23:27 Shutting down SPTI...I 17:23:27 ImgBurn closed!
LIGHTNING UK! Posted May 18, 2016 Posted May 18, 2016 That's a bit of a weird 'reason' to be getting from the OS if the device hasn't been disconnected... and I'm assuming it hasn't been disconnected because there's been no 'device removal detected' message added to the log. Sorry, I don't really have an answer for that one.
Sizzlechest Posted May 18, 2016 Author Posted May 18, 2016 Some context: This is a Primera disc duplicator, but I'm not using IMGBurn to control the robot. Both drives are connected via USB.
Recommended Posts