Muse Posted July 17, 2016 Posted July 17, 2016 (edited) Hi there... This is my first post. I love Imgburn, have been using extensively for over a year on my other machines. On this machine today I launched Imgburn and get this error: -------------------------------------------ImgBurn-------------------------------------------X I/O Error!Device: [1:3:0] TSSTcorp CD/DVDW TS-H552L 0614 (F:)(ATA)CDB: 12 00 00 00 60 00Interpretation: InquiryReason: Invalid access to memory location [Retry] [Cancel] ------------------------------------------- The PC is kind of old, is running WinXP. My SATA DVD/CD drive doesn't work on its SATA controller, so I'm using an IDE optical drive. I don't have issues with it, in general. Seems to work OK with other programs. I don't know if this issue is related to the optical drive. The machine is running AVG free AV. I temporarily disabled AVG and the error happened as usual upon launch of Imgburn. Thanks for your help. I just registered, will attempt to make sure I get an email when this thread is posted to. Thanks again. - - - - Edit: Here's what it says in the log: I 11:22:59 ImgBurn Version 2.5.8.0 started!I 11:22:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)I 11:22:59 Total Physical Memory: 2,096,624 KiB - Available: 329,952 KiBI 11:22:59 Initialising SPTI...I 11:22:59 Searching for SCSI / ATAPI devices...E 11:23:09 Device->Initialise() Failed!E 11:23:09 Device: [1:3:0] TSSTcorp CD/DVDW TS-H552L 0614 (F:) (ATA)E 11:23:09 This drive will not be visible in the program.E 11:23:10 Device->Initialise() Failed!E 11:23:10 Device: [1:3:0] TSSTcorp CD/DVDW TS-H552L 0614 (F:) (ATA)E 11:23:10 This drive will not be visible in the program.W 11:23:10 No devices detected! Edited July 17, 2016 by Muse
LIGHTNING UK! Posted July 17, 2016 Posted July 17, 2016 Boot into safe mode and see if the same thing happens. If it does, come back on the forum and get the error up on the screen. Either screenshot and upload it for me please or press CTRL+C to copy it to the clipboard and then CTRL+V to paste it into your reply. It's important I have it *exactly* as displayed.
Muse Posted July 18, 2016 Author Posted July 18, 2016 (edited) This morning Imgburn sees the optical drive after a restart. I don't normally reboot the machine often, but had to yesterday because my HDTV session had a lockup, completely locked up machine, unresponsive. So, I started the machine from scratch. Thank you for the response. Again, I just love Imgburn! Edited July 18, 2016 by Muse
Recommended Posts