kmecko Posted July 4, 2017 Posted July 4, 2017 (edited) I am using Power2Go to burn ISO files of Blu-Ray movies to Verbatim DVD+R DL disks and they play at Xbox One. However, after successfully burning a disk, Power2Go crashes every time and messes up my PC so I have to reboot every time. Cyberlink was not able to resolve the issue. I tried ImgBurn and not a single disk was able to play on Xbox One. Movie disk plays on my PC, but not on Xbox One. Can anyone help me figure it out, why ImgBurn disk would not play on Xbox One and if I use Power2Go to burn the same ISO file it plays on Xbox One? Both Blu-Ray movie disks (burned by ImgBurn and Power2Go) play on PC. Edited July 5, 2017 by kmecko
LIGHTNING UK! Posted July 5, 2017 Posted July 5, 2017 It could be related to the 'book type'. Post the log of you burning and verifying the disc please.
kmecko Posted July 5, 2017 Author Posted July 5, 2017 Thank you for your help. Bellow is the last log entry. I did not do "verify". The disk plays on PC and does not play on Xbox One. ; //****************************************\\; ImgBurn Version 2.5.8.0 - Log; Tuesday, 04 July 2017, 16:40:43; \\****************************************//;;I 15:52:32 ImgBurn Version 2.5.8.0 started!I 15:52:32 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)I 15:52:32 Total Physical Memory: 12,581,356 KiB - Available: 8,707,188 KiBI 15:52:32 Initialising SPTI...I 15:52:32 Searching for SCSI / ATAPI devices...I 15:52:32 -> Drive 1 - Info: TOSHIBA ODD-DVD SD-R5272 1030 (E:) (ATA)I 15:52:32 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (X:) (SCSI)I 15:52:33 -> Drive 3 - Info: HL-DT-ST BD-RE BE08LU20 2.00-02 (F:) (ATA)I 15:52:33 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 1 BD-RE!I 15:58:37 Operation Started!I 15:58:37 Source File: M:\Alice_Through_the_Looking_Glass_BD9.isoI 15:58:37 Source File Sectors: 3,885,696 (MODE1/2048)I 15:58:37 Source File Size: 7,957,905,408 bytesI 15:58:37 Source File Volume Identifier: Alice Through the Looking GlassI 15:58:37 Source File Volume Set Identifier: 4AE16C86003B4A04I 15:58:37 Source File Application Identifier: ImgBurn v2.5.8.0I 15:58:37 Source File Implementation Identifier: ImgBurnI 15:58:37 Source File File System(s): UDF (2.50)I 15:58:37 Destination Device: [5:1:0] HL-DT-ST BD-RE BE08LU20 2.00 (F:) (ATA)I 15:58:37 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)I 15:58:37 Destination Media Supported Write Speeds: 2.4x, 4xI 15:58:37 Destination Media Sectors: 4,173,824I 15:58:37 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)I 15:58:37 Write Mode: DVDI 15:58:37 Write Type: DAOI 15:58:37 Write Speed: 2.4xI 15:58:37 DVD+R DL Reserve Track: NoI 15:58:37 Link Size: AutoI 15:58:37 Lock Volume: YesI 15:58:37 Test Mode: NoI 15:58:37 OPC: NoI 15:58:37 BURN-Proof: EnabledI 15:58:37 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)I 15:58:37 Book Type Setting: DVD-ROMI 15:58:37 Optimal L0 Data Zone Capacity: 1,942,848I 15:58:37 Optimal L0 Data Zone Method: ECC Block BoundaryI 15:59:08 Set L0 Data Zone Capacity Succeeded!I 15:59:08 L0 Data Zone Capacity - Effective: 1,942,848I 15:59:08 Filling Buffer... (80 MiB)I 15:59:09 Writing LeadIn...I 15:59:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 3885695)I 15:59:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3885695)I 15:59:10 Writing Layer 0... (LBA: 0 - 1942847)I 16:19:19 Writing Layer 1... (LBA: 1942848 - 3885695)I 16:39:32 Synchronising Cache...I 16:39:33 Closing Track...I 16:39:40 Finalising Disc...I 16:40:35 Exporting Graph Data...I 16:40:35 Graph Data File: C:\Users\Ivan\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BE08LU20_2.00_TUESDAY-JULY-4-2017_3-58_PM_MKM-003-00_2.4x.ibgI 16:40:35 Export Successfully Completed!I 16:40:35 Operation Successfully Completed! - Duration: 00:41:57I 16:40:35 Average Write Rate: 3,209 KiB/s (2.4x) - Maximum Write Rate: 3,286 KiB/s (2.4x)I 16:40:43 Close Request AcknowledgedI 16:40:43 Closing Down...I 16:40:43 Shutting down SPTI...I 16:40:43 ImgBurn closed!;
LIGHTNING UK! Posted July 5, 2017 Posted July 5, 2017 I've seen it where some players won't play BD Video from discs where the booktype has been changed to DVD-ROM... because they simply don't expect to ever see BD Video content on such discs. So what I'd suggest is going into the Settings -> Write tab -> Page 1 and enable the 'Use Normal for BD Video Discs' option. Then try again after you've burnt another one.
kmecko Posted July 5, 2017 Author Posted July 5, 2017 (edited) Lightning UK! Thank you very much for your help. It worked like a charm! The score is now officially: ImgBurn 1 : Power2Go 0 Yes, Power2Go crashes every single time after it burns a disk, that's why it is loosing! I think I will stick with ImgBurn for as long as disks are playing in Xbox One. Once again, thank you for your prompt reply and for your spot on answer. Regards, Ivan Kmecko Edited July 5, 2017 by kmecko
Recommended Posts