Blueie Posted September 7, 2017 Posted September 7, 2017 Hello I am getting the following error while trying to burn a TS-VIDEO folder to a blank DVD: I/O DEvice: [1:1:0] HL-DT-ST DVDRAM GH41N MN01 (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 00 0E 50 00 00 01 00 Interpretation: Read (10) - Sector: 3664 Sense Area: F) 00 03 00 00 0E 50 0A 00 00 03 0F 11 00 00 00 00 00 SK Interpretation: Medium Error ASC/ASCQ Interpretation: Unrecovered Read Error What is likely to be the problem, please? Thanks!
LIGHTNING UK! Posted September 7, 2017 Posted September 7, 2017 That's your drive reporting a read error, so if you've just burnt a disc and it's verifying it, it means the drive did a bad job of burning. If you post the log, I'll take a look and advise where I can.
Blueie Posted September 7, 2017 Author Posted September 7, 2017 Thanks, Lightening for your reply. I did the burn on another PC which is 4 miles away. I will try burning it on my own PC (the one I am on now) and see if I get an error and post back. Thanks again!
Blueie Posted September 7, 2017 Author Posted September 7, 2017 In my own PC, I am now getting this error: I/O Device: [3:0:0] HL-DT-ST DVDRAM GHDON 1.00 (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 0B 3D 40 00 01 00 Interpretation: Read (10) - Sector: 736576 Sense Area: 71 00 03 00 00 0A 00 00 00 00 11 05 00 00 00 00 SK Interpretation: Medium Error ASC/ASCQ Interpretation: L-EC Uncorrectable Error ImgBurn is still working in the background, but I may as well cancel it. Thanks again
LIGHTNING UK! Posted September 7, 2017 Posted September 7, 2017 Roughly the same issue. The disc isn't readable. If you could post the log, that would help. I'd have to assume it's due to low quality media being used or you're burning at a 'less than optimal' speed.
Blueie Posted September 7, 2017 Author Posted September 7, 2017 Where would I get that? I have closed down ImgBurn.
LIGHTNING UK! Posted September 7, 2017 Posted September 7, 2017 Open it again and check the 'Help' menu.
LIGHTNING UK! Posted September 7, 2017 Posted September 7, 2017 I don't think it uploaded successfully, could you try again please?
LIGHTNING UK! Posted September 7, 2017 Posted September 7, 2017 Try setting the write speed to 8x and burn another one. If that doesn't work you can... 1. try cleaning the drive with a cleaning disc 2. try different media 3. try a different drive As you've already tried the discs in another drive and run into the same problem, it's probably the discs at fault - unless that drive is also dirty / faulty!
Blueie Posted September 7, 2017 Author Posted September 7, 2017 Under Tools | Auto Write Speed, I have changed it to 8x (it was Max). I will try it again. I have used about 6 different disks (different brands) and post back later.
Blueie Posted September 7, 2017 Author Posted September 7, 2017 Burn successful! Thank you. Seems like the x8 worked.
Recommended Posts