Teri Posted November 1, 2006 Posted November 1, 2006 I have searched the forums and FAQ's but don't see anything like this one. I've burned 5 coasters and am at my wit's end. While the menu looks and works perfectly, when I play video I'm getting a double image on each half of the screen (imagine the screen split down the middle and the same video playing on both sides at the same time) and it freezes/halts during playback. Audio is fine while it's playing and it plays fine on my PC. I've burned a lot of DVD's on the batch of single layer Memorex 16X DVD-R's using Nero and only came across two bad disks out of about 30, and none of them failed this way so I don't think it's my media. I've just started using a LOT of new software, so I'm not sure where to begin, so I'm beginning at the end because I'm lazy and I couldn't find anything like this on the DVDStyler forum either. Here's what I've got and what I'm using, any advice will be appreciated: Software: .tivo files are edited in VideoReDo Plus ver 2.5.2.491 and saved as .vob manually changed filetype to .mpg Create menus (VERY basic) in DVDStyler ver 1.5b6 and 'burn' as an .iso (Settings for NTSC 720X480) Create ISO command: mkisofs -V '$VOL_ID' -o '$FILE' -dvd-video '$DIR' Open .iso in ImgBurn 2.1.0.0 and write/verify (both pass) Hardware/media info TOSHIBA CD/DVDW SDR5372V TU15 (ATA) Current Profile: DVD-ROM Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 2,047,173 Size: 4,192,610,304 bytes Time: 454:57:48 (MM:SS:FF) Supported Write Speeds: 2x, 4x, 6x, 8x, 12x Pre-recorded Information: Manufacturer ID: RITEKF1 Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: 10.08Mbps Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,243,780 Last Physical Sector in Layer 0: 0
Shamus_McFartfinger Posted November 1, 2006 Posted November 1, 2006 Pre-recorded Information:Manufacturer ID: RITEKF1 Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Welcome aboard and all that. Honestly, the first thing I'd do is ditch your media. Get some Verbatims or Taiyo Yuden media and see if it helps. Riteks just ain't what they used to be.
LIGHTNING UK! Posted November 1, 2006 Posted November 1, 2006 Other than RITEKF1 discs being useless, the issue you're having does not sound like it's at all related to the actual burning stage. Split pictures etc sounds like it can't decode the video properly and of course that can only be attributed to the program that created it in the first place. PC software players are MUCH more forgiving of that kinda thing - they can just release fixes / workarounds for encoder problems. Standalones can't do that - unless you manage to find a firmware update for your player of course.
blutach Posted November 1, 2006 Posted November 1, 2006 I'd check the attributes (resolution) of the video and make sure it is supported in the player/conform to the DVD Standard. Regards
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now