mordeekaakh Posted April 27, 2020 Share Posted April 27, 2020 Hey! Tried searching but couldn't find much about this particular issue (/annoyance) so I'll try asking. I'm trying to read (from DVD to .ISO) an old and somewhat scratched disc. I'm getting quite a few read errors (not surprised) but the annoyance is, every time ImgBurn hits a read error, it ejects the disc and I'll have to push it back in for it to continue. It continue for a few seconds (judging by the sector numbers in the log it gets past the problem too) just to find a new error and eject again. Now the disc is bad and not even that important, so even if this doesn't work it's fine, I'm just trying to do some salvaging for fun. The annoyance is that I have to sit here and push the disc back every 15 or so seconds because it keeps ejecting instead of just retrying. Is there any way to stop it doing this? One thing is the annoyance but also because of the time to speed up and down it takes such a long time. I've tried selecting an option about "auto 'abort' on error" under autoloaders, didn't do anything. Bonus question in the end: upon retrying it seems to continue, and the next error reports issue on a higher sector; does this mean it could read the first sectors fine on the first retry, or did it skip it meaning I'm wasting my time here? Log is attached for details Start of the log (been going on for a while so this thing is soooo long, but it's just endlessly repeating with new sectors so you get the gist of it) I 10:07:29 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200) I 10:07:29 Total Physical Memory: 16,668,464 KiB - Available: 10,752,428 KiB I 10:07:29 Initialising SPTI... I 10:07:29 Searching for SCSI / ATAPI devices... I 10:07:30 -> Drive 1 - Info: HL-DT-ST DVD+-RW GS40N A100-40 (D:) (SATA) I 10:07:30 Found 1 DVD±RW/RAM! I 10:07:52 Operation Started! I 10:07:52 Source Device: [0:0:0] HL-DT-ST DVD+-RW GS40N A100 (D:) (SATA) I 10:07:52 Source Media Type: DVD-ROM (Book Type: DVD-ROM) I 10:07:52 Source Media Supported Read Speeds: 2x, 4x, 6x, 8x I 10:07:52 Source Media Sectors: 2,290,896 (Track Path: PTP) I 10:07:52 Source Media Size: 4,691,755,008 bytes I 10:07:52 Source Media Volume Identifier: PBPX_95514 I 10:07:52 Source Media Volume Set Identifier: 578895=2SCEI SCEE I 10:07:52 Source Media Application Identifier: PLAYSTATION I 10:07:52 Source Media Implementation Identifier: DVD-ROM GENERATOR I 10:07:52 Source Media File System(s): ISO9660, UDF (1.02) I 10:07:52 Read Speed (Data/Audio): MAX / 8x I 10:07:52 Destination File: C:\PS2SMB\DVD\PBPX_95514.ISO I 10:07:52 Destination Free Space: 143,531,827,200 Bytes (140,167,800.00 KiB) (136,882.62 MiB) (133.67 GiB) I 10:07:52 Destination File System: NTFS I 10:07:52 File Splitting: Auto I 10:07:53 Read Speed - Effective: 3.3x - 8x I 10:08:02 Reading Session 1 of 1... (1 Track, LBA: 0 - 2290895) I 10:08:02 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 2290895) W 10:10:04 Failed to Read Sectors 321728 - 321759 - Reason: Unrecovered Read Error <this is where the disc slows down and ejects, next line appears at ejection a few seconds later, ref timestamp W 10:10:10 Failed to Read Sector 321728 - Reason: Logical Unit is in process of becoming ready W 10:10:10 Sector 321728 maps to File: \F355OPM\HIGH\ADX_BGM.AFS W 10:10:10 Waiting for device to become ready... I 10:10:32 Device ready! I 10:10:32 Reading Sectors... W 10:10:32 Retrying (1 of 20)... I 10:10:32 Reading Sectors... W 10:10:46 Failed to Read Sectors 345536 - 345567 - Reason: Unrecovered Read Error W 10:10:51 Failed to Read Sector 345536 - Reason: Logical Unit is in process of becoming ready W 10:10:51 Sector 345536 maps to File: \F355OPM\HIGH\ADX_BGM.AFS W 10:10:51 Waiting for device to become ready... I 10:12:16 Device ready! I 10:12:16 Reading Sectors... W 10:12:16 Retrying (1 of 20)... I 10:12:16 Reading Sectors... W 10:12:21 Failed to Read Sectors 346336 - 346367 - Reason: Unrecovered Read Error W 10:12:26 Failed to Read Sector 346336 - Reason: Logical Unit is in process of becoming ready W 10:12:26 Sector 346336 maps to File: \F355OPM\HIGH\ADX_BGM.AFS W 10:12:26 Waiting for device to become ready... I 10:12:43 Device ready! I 10:12:43 Reading Sectors... W 10:12:43 Retrying (1 of 20)... I 10:12:43 Reading Sectors... W 10:12:52 Failed to Read Sectors 358304 - 358335 - Reason: Unrecovered Read Error W 10:12:58 Failed to Read Sector 358304 - Reason: Logical Unit is in process of becoming ready W 10:12:58 Sector 358304 maps to File: \F355OPM\HIGH\ADX_DJ.AFS W 10:12:58 Waiting for device to become ready... I 10:13:28 Device ready! I 10:13:28 Reading Sectors... W 10:13:28 Retrying (1 of 20)... I 10:13:28 Reading Sectors... W 10:13:32 Failed to Read Sectors 359104 - 359135 - Reason: Unrecovered Read Error W 10:13:37 Failed to Read Sector 359104 - Reason: Logical Unit is in process of becoming ready W 10:13:37 Sector 359104 maps to File: \F355OPM\HIGH\ADX_TR.AFS W 10:13:37 Waiting for device to become ready... I 10:14:13 Device ready! I 10:14:13 Reading Sectors... W 10:14:13 Retrying (1 of 20)... I 10:14:13 Reading Sectors... W 10:14:18 Failed to Read Sectors 359936 - 359967 - Reason: Unrecovered Read Error W 10:14:23 Failed to Read Sector 359936 - Reason: Logical Unit is in process of becoming ready ad infinitum Just to repeat: I understand why the errors appear, the disc is bad, that's fine. I'd just want it to stop ejecting every single error, as obviously there is alot of them. I've had trouble with another disc before, but then it went trough all 20 attempts before giving up and giving me an error message, not sure why it ejects now on the first error, don't recall anything having changed since then. Thanks for any help in advance! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 27, 2020 Share Posted April 27, 2020 This is nothing to do with imgburn, your drive is doing it. Link to comment Share on other sites More sharing options...
Recommended Posts