I/O failure. How? What to do next?

[midnightangel]

This is my log file........................

 

 

I 19:48:37 ImgBurn Version 2.1.0.0 started!

I 19:48:37 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 19:48:37 Initialising SPTI...

I 19:48:37 Searching for SCSI / ATAPI devices...

I 19:48:41 Found 1 DVD-ROM and 1 DVD+RW!

I 19:48:41 Operation Started!

I 19:48:41 Source File: C:\SCORPION_KING_WIDE.ISO

I 19:48:41 Source File Sectors: 2,223,991 (MODE1/2048)

I 19:48:41 Source File Size: 4,554,733,568 bytes

I 19:48:41 Source File Volume Identifier: SCORPION_KING_WIDE

I 19:48:41 Source File Implementation Identifier: DVD Shrink

I 19:48:41 Source File File System(s): ISO9660, UDF (1.02)

I 19:48:41 Destination Device: [1:1:0] DVD+R/RW DX082D 14SB (E:) (ATA)

I 19:48:41 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 19:48:41 Destination Media Sectors: 2,295,104

I 19:48:41 Write Mode: DVD

I 19:48:41 Write Type: DAO

I 19:48:41 Write Speed: 4x

I 19:48:41 Link Size: Auto

I 19:48:42 Test Mode: No

I 19:48:42 BURN-Proof: Enabled

I 19:48:43 Filling Buffer...

I 19:48:44 Writing LeadIn...

I 19:48:53 Writing Image...

I 20:02:59 Synchronising Cache...

I 20:03:01 Closing Track...

I 20:03:06 Finalising Disc...

I 20:03:30 Image MD5: b0bf821acfba0ff02f15b04ed4b62acb

I 20:03:31 Operation Successfully Completed! - Duration: 00:14:48

I 20:03:31 Average Write Rate: 5,257 KB/s (3.8x) - Maximum Write Rate: 5,566 KB/s (4.0x)

I 20:03:31 Cycling Tray before Verify...

I 20:03:47 Device Ready!

I 20:03:47 Operation Started!

I 20:03:47 Source Device: [1:1:0] DVD+R/RW DX082D 14SB (E:) (ATA)

I 20:03:47 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 20:03:47 Image File: C:\SCORPION_KING_WIDE.ISO

I 20:03:47 Image File Sectors: 2,223,991 (MODE1/2048)

I 20:03:47 Image File Size: 4,554,733,568 bytes

I 20:03:47 Image File Volume Identifier: SCORPION_KING_WIDE

I 20:03:47 Image File Implementation Identifier: DVD Shrink

I 20:03:47 Image File File System(s): ISO9660, UDF (1.02)

I 20:03:47 Verifying Sectors...

W 20:04:17 Failed to read Sector 0 - Logical Block Address out of Range

W 20:04:17 Failed to read Sector 1 - Logical Block Address out of Range

W 20:04:18 Failed to read Sector 2 - Logical Block Address out of Range

W 20:04:19 Failed to read Sector 3 - Logical Block Address out of Range

W 20:04:19 Failed to read Sector 4 - Logical Block Address out of Range

W 20:04:19 Failed to read Sector 5 - Logical Block Address out of Range

W 20:04:19 Failed to read Sector 6 - Logical Block Address out of Range

W 20:04:20 Failed to read Sector 7 - Logical Block Address out of Range

W 20:04:20 Failed to read Sector 8 - Logical Block Address out of Range

W 20:04:20 Failed to read Sector 9 - Logical Block Address out of Range

W 20:04:20 Failed to read Sector 10 - Logical Block Address out of Range

W 20:04:20 Failed to read Sector 11 - Logical Block Address out of Range

W 20:04:24 Failed to read Sector 12 - Logical Block Address out of Range

W 20:04:26 Failed to read Sector 13 - Logical Block Address out of Range

W 20:04:26 Failed to read Sector 14 - Logical Block Address out of Range

E 20:04:37 Failed to read Sector 15 - Logical Block Address out of Range

E 20:04:37 Failed to Verify Sectors!

E 20:04:37 Operation Failed! - Duration: 00:00:50

I 20:04:37 Average Verify Rate: 0 KB/s (0.0x) - Maximum Verify Rate: 3 KB/s (0.0x)

 

Everything up till the bold area seems to be perfect. Can anyone explain what happened.

[kevdriver]

Angel, looks like your burner can't read what it just wrote to the disc. Alot of Sony discs are hit and miss when it comes to quality. First off your burner looks to be a Cyberdrive and has a newer firmware 150B Your currently on 14SB, would be a good idea to update. www.rpc1.org Flash the burner and try your burn and verify again.

 

 

 

We reccommend either Verbatim or Taio Yuden for blank media, both top of the line stuff.

[midnightangel]

I am updating my firmware right now, but take a look at the BOLD areas of this report and tell me if you have any ideas concerning this.

 

 

 

 

I 22:24:44 ImgBurn Version 2.1.0.0 started!

I 22:24:44 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 22:24:44 Initialising SPTI...

I 22:24:44 Searching for SCSI / ATAPI devices...

I 22:24:44 Found 1 DVD-ROM and 1 DVD+RW!

I 22:24:49 Operation Started!

I 22:24:49 Source File: C:\MONSTER_HOUSE.ISO

I 22:24:49 Source File Sectors: 2,285,932 (MODE1/2048)

I 22:24:49 Source File Size: 4,681,588,736 bytes

I 22:24:49 Source File Volume Identifier: MONSTER_HOUSE

I 22:24:49 Source File Implementation Identifier: DVD Shrink

I 22:24:49 Source File File System(s): ISO9660, UDF (1.02)

I 22:24:49 Destination Device: [1:1:0] DVD+R/RW DX082D 14SB (E:) (ATA)

I 22:24:49 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 22:24:49 Destination Media Sectors: 2,295,104

I 22:24:49 Write Mode: DVD

I 22:24:49 Write Type: DAO

I 22:24:49 Write Speed: 4x

I 22:24:49 Link Size: Auto

I 22:24:50 Test Mode: No

I 22:24:50 BURN-Proof: Enabled

I 22:24:51 Filling Buffer...

I 22:24:52 Writing LeadIn...

I 22:24:58 Writing Image...

I 22:42:39 Synchronising Cache...

I 22:42:40 Closing Track...

I 22:42:46 Finalising Disc...

W 22:43:00 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Unrecovered Read Error

E 09:15:42 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session

I 09:15:42 Image MD5: 54650a0f14b4dad07159a518c28f358c

I 09:15:42 Operation Successfully Completed! - Duration: 10:50:52

I 09:15:42 Average Write Rate: 4,309 KB/s (3.1x) - Maximum Write Rate: 4,726 KB/s (3.4x)

I 09:15:42 Cycling Tray before Verify...

I 09:16:18 Device Ready!

I 09:16:18 Operation Started!

I 09:16:18 Source Device: [1:1:0] DVD+R/RW DX082D 14SB (E:) (ATA)

I 09:16:18 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 09:16:18 Image File: C:\MONSTER_HOUSE.ISO

I 09:16:18 Image File Sectors: 2,285,932 (MODE1/2048)

I 09:16:18 Image File Size: 4,681,588,736 bytes

I 09:16:18 Image File Volume Identifier: MONSTER_HOUSE

I 09:16:18 Image File Implementation Identifier: DVD Shrink

I 09:16:18 Image File File System(s): ISO9660, UDF (1.02)

I 09:16:18 Verifying Sectors...

E 09:16:21 Failed to read Sector 0 - Logical Block Address out of Range

E 09:16:21 Failed to Verify Sectors!

E 09:16:21 Operation Failed! - Duration: 00:00:03

I 09:16:21 Average Verify Rate: N/A - Maximum Verify Rate: N/A

[LIGHTNING UK!]

The drive is erroring out at the end of the burn. Nothing you can do except update the firmware and try again.

 

If it still fails, ditch those discs and find some other ones it supports properly.

[midnightangel]

Right now I have sony and I will keep burning on these until I use them all up or destroy them, then I plan to buy some Vabridium or however it's spelt. LOL. Anyway, those should do me better justice, you think? Or is there a better media you would suggest?

[kevdriver]

Angel. If your still getting those error messages even after upgrading your firmware, then Yes, best to but some Verbatim or Taio Yuden blank media. These are the best media to burn to and you should have successful burns no problem.

 

 

 

Ps Verbridium............... Laughing with you, not at you.............

[midnightangel]

yup. I'm laughing too. Anyhoot, thanks again for the help, and i'll definately put a reply back up here once i pick up some verbatim discs and let you know how i like them.

Edited November 26, 2006 by midnightangel

[lfcrule1972]

Exactly how many Sony Coasters do you have to make first ?