SJason Posted Tuesday at 12:56 AM Posted Tuesday at 12:56 AM Hi everyone, I was trying to burn a Sony 128GB BDXL QL disc as UDF 2.01 yesterday. However, ImgBurn refused to burn it, saying "Too many UDF Extended File Entry AD's". The file I was trying to burn is a single zip file just over 128GBytes and a txt file <1KB. I searched around in this forum, but only found this error occurring with 200GB+ images. I used to burn single 100GB files onto BDXL TL discs and this error never occurred. I tried UDF 2.60 but the error persists. Is there a hard limit on the image size? If there is, what is it exactly? Any help would be appreciated. Here's the log (this was from yesterday when I tried to overburn, today I tried to reduce the image size to fit into the disc but to no avail): I 23:02:41 Operation Started! I 23:02:41 Building Image Tree... I 23:02:41 Calculating Totals... I 23:02:41 Preparing Image... I 23:02:41 Contents: 2 Files, 0 Folders I 23:02:41 Content Type: Data I 23:02:41 Data Type: MODE1/2048 I 23:02:41 File System(s): UDF (2.01) I 23:02:41 Volume Label: BDXL TEST (QL) I 23:02:41 Size: 128,001,294,526 bytes I 23:02:41 Sectors: 62,500,634 I 23:02:41 Image Size: 128,001,900,544 bytes I 23:02:41 Image Sectors: 62,500,928 I 23:02:42 Operation Successfully Completed! - Duration: 00:00:01 W 23:02:43 User accepted disc space warning and is attempting to overburn! I 23:02:43 Operation Started! I 23:02:43 Source File: -==/\/[BUILD IMAGE]\/\==- I 23:02:43 Source File Sectors: 62,500,928 (MODE1/2048) I 23:02:43 Source File Size: 128,001,900,544 bytes I 23:02:43 Source File Volume Identifier: BDXL TEST (QL) I 23:02:43 Source File Volume Set Identifier: 5972B85403B9B021 I 23:02:43 Source File Application Identifier: ImgBurn v2.5.8.0 I 23:02:43 Source File Implementation Identifier: ImgBurn I 23:02:43 Source File File System(s): UDF (2.01) I 23:02:43 Destination Device: [0:0:0] PIONEER BDX-PR1AME 1.00 (F:) (USB) I 23:02:43 Destination Media Type: BD-R (Disc ID: SONY-NQ1-001) I 23:02:43 Destination Media Supported Write Speeds: 2x, 4x, 6x I 23:02:43 Destination Media Sectors: 62,500,864 I 23:02:43 Write Mode: BD I 23:02:43 Write Type: DAO I 23:02:43 Write Speed: 2x I 23:02:43 Hardware Defect Management Active: No I 23:02:43 BD-R Verify Not Required: Yes I 23:02:43 Link Size: Auto I 23:02:43 Lock Volume: Yes I 23:02:43 Test Mode: No I 23:02:43 OPC: No I 23:02:43 BURN-Proof: Enabled I 23:02:43 Write Speed Successfully Set! - Effective: 8,990 KB/s (2x) I 23:02:43 Advanced Settings - Optimal Writing Speed: No I 23:02:44 Filling Buffer... (80 MiB) I 23:02:52 Synchronising Cache... W 23:02:54 User opted to skip the 'Close Track/Session/Disc' functions. E 23:02:54 Failed to Write Image! E 23:02:54 Operation Failed! - Duration: 00:00:11 I 23:02:54 Average Write Rate: N/A - Maximum Write Rate: N/A
LIGHTNING UK! Posted 14 hours ago Posted 14 hours ago Blimey, that’s a definite ‘check the code and see what’s going on’ type of question. Leave it with me and I’ll get back to as soon as I can.
Recommended Posts