'waitimmediateIO' Deferred error - write error

[rheo]

I am having a problem with Imageburn recently, it gave me the potential error that says like this:

 

 

'waitimmediateIO' Deferred error - write error

 

and then it says: "operation failed"

 

and when this problem start happenings, I could no even burn a music CD on my drive.....can anybody help me ???

 

Thanks in advance.

[dontasciime]

what speed are you trying, also what interface IDE/USB etc ?

 

Type of writer you have, brand and media code of disc's your trying ?

 

Post a log of your attempts

Edited December 11, 2006 by dontasciime

[rheo]

what speed are you trying, also what interface IDE/USB etc ?

 

Type of writer you have, brand and media code of disc's your trying ?

 

Post a log of your attempts

 

I 09:56:54 ImgBurn Version 2.1.0.0 started!

I 09:56:54 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

W 09:56:54 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 09:56:54 Initialising SPTI...

I 09:56:54 Searching for SCSI / ATAPI devices...

I 09:57:01 Found 1 DVD+RW!

I 09:57:09 Operation Started!

I 09:57:09 Device: [1:0:0] TOSHIBA ODD-DVD SD-R6252 1A11 (D:) (ATA)

I 09:57:09 Media Type: DVD+RW (Disc ID: INFODISC-A10-01) (Speeds: 1x, 2.4x)

I 09:57:09 Quick Erase: No

I 09:57:09 Erasing Disc...

W 10:22:11 Potential 'WaitImmediateIO' Deferred Error - (3/4) - Write Error

E 10:22:13 Operation Failed! - Duration: 00:25:04

 

TOSHIBA ODD-DVD SD-R6252 1A11 (ATA)

Current Profile: DVD+RW

 

Disc Information:

Status: Others

Erasable: Yes

Formatted: No (Started)

Supported Write Speeds: 1x, 2.4x

 

Physical Format Information (Last Recorded):

Disc ID: INFODISC-A10-01

Book Type: DVD+RW

Part Version: 2

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

does that make sense???

[dontasciime]

1 [iNFODISC-A10-01] not the best Media.

 

2 Your firmware is out of date Latest is here ftp://ftp.compaq.com/pub/softpaq/sp28501-29000/SP28709.exe however please verify that you have HP or COMPAQ laptop dvd writer.

 

3 I would be stopping the use of Any dvd.

 

If your confident the link i posted is for your version of dvd writer then, exit any programs, anydvd, disable any anti virus program you have running, anything else either exit or disable, do not have a disc in drive when you update it, and that tray is closed.

Make sure there is no interruption to the firmware update process, like battery going flat, electricity supply going out etc.

 

 

At your own risk

Edited December 12, 2006 by dontasciime

[rheo]

thanks for the reply...I will definitely try that.......but if I do not use anydvd, i won't be able to backup DVD movies ...or do you have an other suggestion??? I will let you know about the update that i am going to do tonight....Thanks a bunch

[lfcrule1972]

You are having problems burning an image as I see it not backing up your movies (which we can't help you with!). Therefore first thing I would do is disable anydvd as per the ImgBurn warning in your log.....

 

But, it's your call......

[LIGHTNING UK!]

Seems to me that your drive can't even erase the +RW discs you're using.

 

So now would be a good time to get some new ones that use a different dye.

[rheo]

I did the update and it was fine, I tried to burn one movie an it was fine.......BUT today I try it again and it keeps giving me the same thing as before.....I disabled AnyDVD always. Do you think I should get the new DVD writer?? I don't ahve to buy the whole new computer, do I?

[Kenadjian]

Have you tried different discs like suggested??