Jump to content

Recommended Posts

Posted
what kind of disc ?

 

Blank or ?

 

Any disc you put in ?

I put in any disc to be able regardless of so is the blank or the data,DVD or CD-R

 

but ImgBurn 2.1.0.0 is all right.

Posted

Ofy, can you go into help>img logs>copy and paste the entire log from there. It will give us a larger view of whats going on. :) Img is a burning program only not a ripper of any kind. :)

Posted
Ofy, can you go into help>img logs>copy and paste the entire log from there. It will give us a larger view of whats going on. :) Img is a burning program only not a ripper of any kind. :)

ImgBurn 2.2.0.0 Log

====================================================

I 21:47:29 ImgBurn Version 2.2.0.0 started!

I 21:47:29 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 21:47:29 Total Physical Memory: 523,808 KB - Available: 118,948 KB

W 21:47:29 Drive D:\ (FAT32) does not support single files > 4 GB in size.

W 21:47:29 Drive H:\ (FAT32) does not support single files > 4 GB in size.

W 21:47:29 Drive I:\ (FAT32) does not support single files > 4 GB in size.

W 21:47:29 Drive J:\ (FAT32) does not support single files > 4 GB in size.

I 21:47:29 Initialising SPTI...

I 21:47:29 Searching for SCSI / ATAPI devices...

I 21:47:30 Found 1 CD-RW, 1 DVD-ROM, 1 DVD-ROM/CD-RW and 2 DVD?RWs!

W 21:47:42 Device Removal Detected!

I 21:47:42 Searching for SCSI / ATAPI devices...

I 21:47:42 Found 1 CD-RW, 1 DVD-ROM, 1 DVD-ROM/CD-RW and 1 DVD?RW!

W 21:48:08 Device Arrival Detected!

I 21:48:08 Searching for SCSI / ATAPI devices...

I 21:48:17 Found 1 CD-RW, 1 DVD-ROM, 1 DVD-ROM/CD-RW and 2 DVD?RWs!

W 21:50:17 Device Removal Detected!

I 21:50:17 Searching for SCSI / ATAPI devices...

I 21:50:17 Found 1 CD-RW, 1 DVD-ROM, 1 DVD-ROM/CD-RW and 1 DVD?RW!

I 21:50:23 Close Request Acknowledged

I 21:50:23 Closing Down...

I 21:50:24 Shutting down SPTI...

I 21:50:24 ImgBurn closed!

====================================================

 

When I turn on the usb device power source,then set destination is PIONEER A07XL.

The program response also has not been unable to run other programs until

to remove the usb device then to restore normally

 

ImgBurn 2.1.0.0 is all right

post-6153-1171726416_thumb.png

Posted

ofy, under tools> settings in Img , make sure you have spti-microsoft checked off. In fact just hit default. Img runs perfectly well under default setting. :) Also go into tools>filter driver order and copy and paste the results here, if you could :thumbup:

Posted

Getting TOC information, means the drive is trying to read the "Table of contents" on the disc.

it would seem that your drive is struggling to read these discs your using , which probably/possibly means theres a fault with the drive itself. although you say it worked with v2.1.0.0

Are you tyring to use discs that have failed to burn before ?, these would have an incomplete TOC on them ?? causing the drive to struggle to read the TOC

Have you cleaned the lense in the drive ?

Is your other writer drive ok ?, will that burn discs still ?

Posted
ofy, under tools> settings in Img , make sure you have spti-microsoft checked off. In fact just hit default. Img runs perfectly well under default setting. :) Also go into tools>filter driver order and copy and paste the results here, if you could :thumbup:

===============================================

Filter Driver Load Order - ImgBurn v2.2.0.0

===============================================

 

Upper Device Filter: redbook

Upper Class Filter: [None Found]

Device: CD/DVD-ROM Device

Lower Class Filter: ElbyDelay

Lower Class Filter: AnyDVD

Lower Class Filter: PxHelp20

Lower Device Filter: imapi

 

Filter Name: redbook

File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys

File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: Redbook Audio Filter Driver

Product Name: Microsoft ® Windows ® Operating System

Product Version: 5.1.2600.2180

Company Name: Microsoft Corporation

Copyright: © Microsoft Corporation. All rights reserved.

 

Filter Name: ElbyDelay

File Name: C:\WINDOWS\System32\Drivers\ElbyDelay.sys

File Version: 5, 1, 0, 1 [5.1.0.1]

File Description: Elby Delay Lower Filter Driver

Product Name: CDRTools

Product Version: 5, 1, 0, 1 [5.1.0.1]

Company Name: Elaborate Bytes AG

Copyright: Copyright © 2003 - 2006 Elaborate Bytes AG

 

Filter Name: AnyDVD

File Name: C:\WINDOWS\System32\Drivers\AnyDVD.sys

File Version: 6.1.0.0

File Description: AnyDVD Filter Driver

Product Name: AnyDVD

Product Version: 6.1.0.0

Company Name: SlySoft, Inc.

Copyright: Copyright 2002 - 2006 SlySoft, Inc.

 

Filter Name: PxHelp20

File Name: C:\WINDOWS\System32\Drivers\PxHelp20.sys

File Version: 3.00.41a [3.0.41.0]

File Description: Px Engine Device Driver for Windows 2000/XP

Product Name: PxHelp20

Product Version: [2.0.0.0]

Company Name: Sonic Solutions

Copyright: Copyright c Sonic Solutions

 

Filter Name: imapi

File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys

File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: IMAPI Kernel Driver

Product Name: MicrosoftR WindowsR Operating System

Product Version: 5.1.2600.2180

Company Name: Microsoft Corporation

Copyright: c Microsoft Corporation. All rights reserved.

===============================================

 

 

Debug Mode Log

====================================================

I 00:10:01 ImgBurn Version 2.2.0.0 started!

I 00:10:01 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 00:10:01 Total Physical Memory: 523,808 KB - Available: 65,704 KB

W 00:10:01 Drive D:\ (FAT32) does not support single files > 4 GB in size.

W 00:10:01 Drive H:\ (FAT32) does not support single files > 4 GB in size.

W 00:10:01 Drive I:\ (FAT32) does not support single files > 4 GB in size.

W 00:10:01 Drive J:\ (FAT32) does not support single files > 4 GB in size.

I 00:10:01 Initialising SPTI...

I 00:10:01 Searching for SCSI / ATAPI devices...

I 00:10:02 Found 1 CD-RW, 1 DVD-ROM, 1 DVD-ROM/CD-RW and 2 DVD?RWs!

W 00:10:31 I/O Interface 'Debug Mode' has been Enabled!

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: 00 00 00 00 00 00

I 00:10:35 CDB Interpretation: Test Unit Ready

E 00:10:35 SENSE: 00 00 00 06 00 00 00 00 00 00 00 00 FF FF

E 00:10:35 SENSE Interpretation: 控制碼無效。

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: 00 00 00 00 00 00

I 00:10:35 CDB Interpretation: Test Unit Ready

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: 25 00 00 00 00 00 00 00 00 00

I 00:10:35 CDB Interpretation: Read Capacity

I 00:10:35 BUFFER: 00 00 00 00 00 00 08 00

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: 46 02 00 00 00 00 00 00 0C 00

I 00:10:35 CDB Interpretation: Get Configuration

I 00:10:35 BUFFER: 00 00 00 2C 00 00 00 11 00 00 03 24

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: AD 00 00 00 00 00 00 11 08 04 00 00

I 00:10:35 CDB Interpretation: Read Disc Structure - ADIP Information

E 00:10:35 SENSE: 70 00 05 00 00 00 00 0E 00 00 00 00 24 00 00 CF 00 07 00 00 00 00

E 00:10:35 SENSE Interpretation: Invalid Field in CDB

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: AD 00 00 00 00 00 00 00 08 04 00 00

I 00:10:35 CDB Interpretation: Read Disc Structure - Physical Information

I 00:10:35 BUFFER: 08 02 00 00 25 0F 02 00 00 03 00 00 00 00 00 00 00 00 00 00 00 20 01 02 04 06 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: 25 00 00 00 00 00 00 00 00 00

I 00:10:35 CDB Interpretation: Read Capacity

I 00:10:35 BUFFER: 00 00 00 00 00 00 08 00

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: 51 00 00 00 00 00 00 00 20 00

I 00:10:35 CDB Interpretation: Read Disc Information

I 00:10:35 BUFFER: 00 20 00 01 01 01 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: 52 01 00 00 00 01 00 00 30 00

I 00:10:35 CDB Interpretation: Read Track Information

I 00:10:35 BUFFER: 00 22 01 01 00 04 61 01 00 00 00 00 00 00 00 00 00 23 10 20 00 00 00 10 00 23 10 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

I 00:10:35 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:10:35 CDB: 43 00 00 00 00 00 01 80 00 00

I 00:10:35 CDB Interpretation: Read TOC/PMA/ATIP

remove the usb device

E 00:11:17 SENSE: 00 00 00 79 00 00 00 00 00 00 00 00 FF FF

E 00:11:17 SENSE Interpretation: 信號等待逾時。

I 00:11:17 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:11:17 CDB: 43 02 04 00 00 00 00 00 20 00

I 00:11:17 CDB Interpretation: Read TOC/PMA/ATIP

E 00:11:17 SENSE: 00 00 00 37 00 00 00 00 00 00 00 00 FF FF

W 00:11:17 Device Removal Detected!

E 00:11:17 SENSE Interpretation: 指定的網路資源或裝置無法再使用。

I 00:11:17 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:11:17 CDB: AD 00 00 00 00 00 00 01 00 08 00 00

I 00:11:17 CDB Interpretation: Read Disc Structure - Copyright Information

E 00:11:18 SENSE: 00 00 00 37 00 00 00 00 00 00 00 00 FF FF

E 00:11:18 SENSE Interpretation: 指定的網路資源或裝置無法再使用。

I 00:11:18 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:11:18 CDB: AD 00 00 00 00 00 00 0E 00 44 00 00

I 00:11:18 CDB Interpretation: Read Disc Structure - Pre-Recorded Information

E 00:11:18 SENSE: 00 00 00 37 00 00 00 00 00 00 00 00 FF FF

E 00:11:18 SENSE Interpretation: 指定的網路資源或裝置無法再使用。

I 00:11:18 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:11:18 CDB: AD 00 00 00 00 02 00 0D 08 04 00 00

I 00:11:18 CDB Interpretation: Read Disc Structure - Specified RMD Field

E 00:11:18 SENSE: 00 00 00 37 00 00 00 00 00 00 00 00 FF FF

E 00:11:18 SENSE Interpretation: 指定的網路資源或裝置無法再使用。

I 00:11:18 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:11:18 CDB: AD 00 00 00 00 00 00 00 08 04 00 00

I 00:11:18 CDB Interpretation: Read Disc Structure - Physical Information

E 00:11:18 SENSE: 00 00 00 37 00 00 00 00 00 00 00 00 FF FF

E 00:11:18 SENSE Interpretation: 指定的網路資源或裝置無法再使用。

I 00:11:18 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:11:18 CDB: AC 00 00 00 00 00 00 00 00 32 03 00

I 00:11:18 CDB Interpretation: Get Performance

E 00:11:18 SENSE: 00 00 00 37 00 00 00 00 00 00 00 00 FF FF

E 00:11:18 SENSE Interpretation: 指定的網路資源或裝置無法再使用。

I 00:11:18 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:11:18 CDB: 46 02 00 00 00 00 00 00 0C 00

I 00:11:18 CDB Interpretation: Get Configuration

E 00:11:18 SENSE: 00 00 00 37 00 00 00 00 00 00 00 00 FF FF

E 00:11:18 SENSE Interpretation: 指定的網路資源或裝置無法再使用。

I 00:11:18 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:11:18 CDB: 00 00 00 00 00 00

I 00:11:18 CDB Interpretation: Test Unit Ready

E 00:11:18 SENSE: 00 00 00 37 00 00 00 00 00 00 00 00 FF FF

E 00:11:18 SENSE Interpretation: 指定的網路資源或裝置無法再使用。

I 00:11:18 [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:11:18 CDB: 00 00 00 00 00 00

I 00:11:18 CDB Interpretation: Test Unit Ready

E 00:11:18 SENSE: 00 00 00 37 00 00 00 00 00 00 00 00 FF FF

E 00:11:18 SENSE Interpretation: 指定的網路資源或裝置無法再使用。

 

.........

Posted
Getting TOC information, means the drive is trying to read the "Table of contents" on the disc.

it would seem that your drive is struggling to read these discs your using , which probably/possibly means theres a fault with the drive itself. although you say it worked with v2.1.0.0

Are you tyring to use discs that have failed to burn before ?, these would have an incomplete TOC on them ?? causing the drive to struggle to read the TOC

Have you cleaned the lense in the drive ?

Is your other writer drive ok ?, will that burn discs still ?

 

my benq 1640(164B) is ok,

post-6153-1171730363_thumb.png

I try to use v2.1.0.0 burn disc

this is the log

; //****************************************\\

; ImgBurn Version 2.1.0.0 - Log

; 星期日, 18 二月 2007, 00:44:39

; \\****************************************//

;

;

I 00:29:52 ImgBurn Version 2.1.0.0 started!

I 00:29:52 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

W 00:29:52 Drive D:\ (FAT32) does not support single files > 4 GB

W 00:29:52 Drive H:\ (FAT32) does not support single files > 4 GB

W 00:29:52 Drive I:\ (FAT32) does not support single files > 4 GB

W 00:29:52 Drive J:\ (FAT32) does not support single files > 4 GB

I 00:29:53 Initialising SPTI...

I 00:29:53 Searching for SCSI / ATAPI devices...

I 00:29:53 Found 1 CD-RW, 1 DVD-ROM, 1 DVD-ROM/CD-RW and 1 DVD崇W!

W 00:30:08 Device Arrival Detected!

I 00:30:08 Searching for SCSI / ATAPI devices...

I 00:30:29 Found 1 CD-RW, 1 DVD-ROM, 1 DVD-ROM/CD-RW and 2 DVD崇Ws!

I 00:32:17 Operation Started!

I 00:32:17 Source File: F:\BT\KP-020-DVD\KP-020.ISO

I 00:32:17 Source File Sectors: 1,734,688 (MODE1/2048)

I 00:32:17 Source File Size: 3,552,641,024 bytes

I 00:32:17 Source File Volume Identifier: KP20

I 00:32:17 Source File Application Identifier: DVD Studio Pro:4.0.3, DSPInterface:382, DVDAuthoring:372, DVDBase:396(Encoder: 483), Oxygene:409

I 00:32:17 Source File Implementation Identifier: Apple Computer, Inc.

I 00:32:17 Source File File System(s): ISO9660, UDF (1.02)

I 00:32:17 Destination Device: [0:0:0] PIONEER DVD-RW DVR-107D 1.22 (P:) (USB)

I 00:32:17 Destination Media Type: DVD-R (Disc ID: GSC003) (Speeds: 1x, 2x, 4x, 6x, 8x)

I 00:32:17 Destination Media Sectors: 2,297,888

I 00:32:17 Write Mode: DVD

I 00:32:17 Write Type: DAO

I 00:32:17 Write Speed: 4x

I 00:32:17 Link Size: Auto

I 00:32:17 Test Mode: No

I 00:32:17 BURN-Proof: Enabled

I 00:32:18 Filling Buffer...

I 00:32:19 Writing LeadIn...

I 00:33:01 Writing Image...

I 00:43:42 Synchronising Cache...

I 00:44:17 Image MD5: 3d37bd54822cf859358c2e01e8abc97f

I 00:44:17 Operation Successfully Completed! - Duration: 00:12:00

I 00:44:17 Average Write Rate: 5,412 KB/s (3.9x) - Maximum Write Rate: 5,697 KB/s (4.1x)

I 00:44:37 Close Request Acknowledged

I 00:44:37 Closing Down...

I 00:44:38 Shutting down SPTI...

I 00:44:38 ImgBurn closed!

Posted

what happens with v2.1 if you already have the USB writer connected when you open ImgBurn ?

your last log says

W 00:30:08 Device Arrival Detected! which im assuming was after ImgBurn was opened .

 

confirm for me please that your using completely new discs and not ones that was in the drive earlier when it failed , or failed burn discs

 

do you have another USB cable you could try on the pioneer drive , to rule out a faulty cable

Posted (edited)
what happens with v2.1 if you already have the USB writer connected when you open ImgBurn ?

your last log says

W 00:30:08 Device Arrival Detected! which im assuming was after ImgBurn was opened .

 

confirm for me please that your using completely new discs and not ones that was in the drive earlier when it failed , or failed burn discs

 

do you have another USB cable you could try on the pioneer drive , to rule out a faulty cable

Because I does turn on the usb power source before run ImgBurn v2.1 program

 

I have try to used other USB cable, has the trouble with v2.2.0.0 as before

Edited by ofy
Posted

2.1.0.0 doesn't retrieve TOC information, that's new to v2.2.0.0

 

I've just tried my 107 via USB and it worked fine. (Mine isn't the XL version though, just the normal DVR-107D)

 

Have you tried updating your enclosure's firmware? Maybe there's a bug in it.

Posted

I have just taken my A07XLB out of one of my computers and put it into a spare external enclosure and ImgBurn 2.2.0.0 is fine

 

a07xlbaf6.jpg

 

 

As suggested see if there is a firmware update for your Enclosure, also if your using front usb or using a Hub, try connecting them to the usb ports at back on motherboard, also check power cable and usb cable at back of enclosure to make sure they are right in and not hanging out slightly. Open enclosure up as well and make sure power cable / IDE cable are in secure and that you have the jumper set to Master on the Pioneer.

 

 

Please note that the device string is DVR-107D but I assure you it is the A07XL Version and on that note anyone with this drive if you right click in Imgburn on drive and check for firmware updates the search string will take you to the wrong firmware for the XL version (DO NOT USE not compatible with XL version), check on rpc1.org manually for the A07XL versions.

 

 

Edit just to make sure it had nothing to do with firmware as mya07 was 1.18 updated it to 1.22 and all is still ok Imgburn 2.2.0.0 works as normal with this drive.

 

a072gu4.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.