lasitter Posted March 19, 2007 Share Posted March 19, 2007 After completing either the burning or verification pass, the program appears to stall with the "Graph Data" message in the status (bottom) line. Before today I had just waited a good while and then killed the program thread to get back the DVD. It really seemed to be dead. When I finally decided to post the problem to this board, I left the screen up while I was completing the board registration. So we're talking about 5-10 minutes. Then the program finally timed out and kicked over into the next phase: "Please insert next disk ... And I clicked on the "Graph Data" icon and got this message: Sorry, I've tried hard but cannot locate your installation of DVDInfoPro. Do you want to locate it manually. Note: If you don't have a copy yet, visit .... Anyway, the whole capture looks like this: Since it's a clip of a screen shot I don't know how the picture will reproduce on your system. You may have to select "view image" or something to be able to read all the text. I'm guessing that I have to go into some configuration screen and tell it that I have no intention of installing this other program. In any event, when a program isn't going to be able to resolve something instantly, it would probably be good to have it pop up a window with an option to skip the step, or give a more accurate explanation for whatever is happening in the status line so that the user doesn't think it's just totally hung. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 19, 2007 Share Posted March 19, 2007 Once the terminated flag has been set within a thread (as is the case here), it'll terminate just as soon as it possibly can. I've honestly no idea why it's taking so long on your machine, I've never seen it happen on anyone elses. I'm guessing that I have to go into some configuration screen and tell it that I have no intention of installing this other program. No, you just don't click the button that tells the program to display the info using DVDInfoPro - i.e. it's your own fault. In any event, when a program isn't going to be able to resolve something instantly, it would probably be good to have it pop up a window with an option to skip the step, or give a more accurate explanation for whatever is happening in the status line so that the user doesn't think it's just totally hung. It HAS hung. It's waiting for the thread to terminate and will sit there until it does. There's no timeout so it'll only finish when it finishes. You can't skip it because the thread is deleted once it's finished running. Link to comment Share on other sites More sharing options...
lasitter Posted March 19, 2007 Author Share Posted March 19, 2007 just don't click the button that tells the program to display the info using DVDInfoPro - i.e. it's your own fault.I'm usually happy when I discover that I only need to stop doing something dumb in order to obtain a good result, but your reply so far has not helped me where (under what menu) you think I turned a particular option "ON", or what the name of that option was. Now I have to guess. Under the "FILE" pulldown, I DID NOT (ever) select the option "Display Graph Data using DVDInfoPro. Better yet, it would be nice if that option were entirely "grayed out" for people that don't have that software installed. Under Tools->Settings->Graph Data, I don't see a setting for DVDInfoPro. If I uncheck "capture processor usage" will that make my problem go away? In any event, when a program isn't going to be able to resolve something instantly, it would probably be good to have it pop up a window with an option to skip the step, or give a more accurate explanation for whatever is happening in the status line so that the user doesn't think it's just totally hung. It HAS hung. It's waiting for the thread to terminate and will sit there until it does. There's no timeout so it'll only finish when it finishes. Hmmm. This still begs the question of why it does successfully finish if you just let it sit for 10-15 minutes at the end of all processing. Losing access to the drive for extended periods of time is no fun. There's nothing in the log telling me what's up. I'll have to substitute a different image than the one supplied, since by the time I went to clip it, the program timed out (quit messing up?) and the screen changed. Other than this one problem the program has performed flawlessly. FYI, I have made many donations to freeware authors for this quality of work. References available upon request. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 19, 2007 Share Posted March 19, 2007 You must have clicked the button to the right of the floppy disc image by the 'Graph Data' text. That button does the same thing as selecting 'Display Graph Data using DVDInfoPro' from the menu. Perhaps you were just randomly clicking and did it accidently? In any case, it won't prompt for DVDInfoPro unless to tell it to display the info using it. Hmmm. This still begs the question of why it does successfully finish if you just let it sit for 10-15 minutes at the end of all processing. Again, sorry, I really don't know! It's not like the program is stuck in a 'while' loop or anything... some API call must just be taking ages to complete - and they're obviously not part my code, so I can't edit them. Link to comment Share on other sites More sharing options...
lfcrule1972 Posted March 20, 2007 Share Posted March 20, 2007 Sounds like the little Graph icon was clicked to me too - unless you are saying that you see this delay with every burn you do ? Link to comment Share on other sites More sharing options...
lasitter Posted March 20, 2007 Author Share Posted March 20, 2007 Sounds like the little Graph icon was clicked to me too - unless you are saying that you see this delay with every burn you do?Every time, long burn or short. I've changed my mind. I'm going to install the trial version of DVDInfoPro. I've downloaded it. I'm sure there's a link somewhere that tells me all the stuff it does better than a Nero scan, right? I've really cooled off on later versions of Nero. Nero 6 hit me with almost two thousand registry key changes. It's become this horrific bloated thing compared to what it once was. Now it wants to do and be everything. Just give me (ImgBurn), or another similar, bulletproof little burning program, relatively free of dependencies. If DVDInfoPro is wonderful, what's $20 in the long run? Link to comment Share on other sites More sharing options...
lfcrule1972 Posted March 20, 2007 Share Posted March 20, 2007 I use DVDinfoPro all the time, results are in the Media/Drives section of the forum You can grab a free (ad-supported) version until you are sure you will keep using it Link to comment Share on other sites More sharing options...
Recommended Posts