necrocracker Posted April 2, 2007 Posted April 2, 2007 Anybody know where I might find a firmware update for a LiteOn SSM-8515S? It came installed in my wife's Acer Aspire 5000 laptop and I can't seem to find any firmware anywhere. It came with GRS2 and I don't actually know how current that is. I use ImgBurn all the time on my desktops with no problems, but am having nothing but trouble with this laptop. I tried one to burn a data disc using a Prodisc DVD-R and it wouldn't finish writing the lead in. I know they are junk but I've burned hundreds of these on my Pioneer 109's with no problems. After 20 minutes, I force quit and rebooted to get the disc out. It had written some, but not past the lead in. Thinking maybe this drive just didn't like Prodisc, I used a Verb DVD+R DL even though the ISO was only 3Gig (all on first layer). It wrote the lead in and then the full image at 4x, but then hung up on the lead out. Again I force quit and had to reboot to get the disc out. The disc finished and reads back fine, but something isn't happy. This is only the 2nd and 3rd discs that have been burned with this drive. The first was a Prodisc burned with DVD Dec that worked fine. I've looked on the ACER site, the LiteOn site and rpc1.org with no firmware options at all. Any other ideas would also be a help. Here is the info panel from the Verb burn. I couldn't find any saved logs, maybe since I had to force quit out both times? Slimtype DVDRW SSM-8515S GRS2 (ATA) Current Profile: DVD+R DL Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 1,637,232 Size: 3,353,051,136 bytes Time: 363:51:57 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x DVD?R DL Boundary Information: L0 Data Zone Capacity: 1,637,232 Changeable: No TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 1637231) -> LeadOut (LBA: 1637232) Physical Format Information (ADIP): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 1,833,839 Last Physical Sector in Layer 0: 1,833,839 Layer Information: Layer 0 Sectors: 1,637,232 (100%) Layer 1 Sectors: 0 (0%) Please move this if it would be better in another section. Thanks!
dontasciime Posted October 14, 2007 Posted October 14, 2007 Acer Flash util and GRS6.bin use at your own risk
dontasciime Posted October 14, 2007 Posted October 14, 2007 LOL Only just noticed this topic has had 400+ views, that it was started in APR 07
sunnymoon Posted May 16, 2016 Posted May 16, 2016 (edited) LOL Only just noticed this topic has had 400+ views, that it was started in APR 07 You think that's funny - I'm still using this drive and just came across this thread - in 2016!!!. Looking out for the firmware file! Edited May 16, 2016 by sunnymoon
LIGHTNING UK! Posted May 17, 2016 Posted May 17, 2016 I don't think Acer released anything newer than the GRS6 firmware it's currently using.
Recommended Posts