errupin Posted April 24, 2007 Share Posted April 24, 2007 I got the following log when burning to Verbatim double layer 2.4x. I never had any problem until today. Should I worry about the dvd quality or was the process succesfully completed despite of the warning and error messages? thanks. I 12:17:30 ImgBurn Version 2.3.2.0 started! I 12:17:30 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 12:17:30 Total Physical Memory: 2.096.300 KB - Available: 1.711.128 KB I 12:17:30 Initialising SPTI... I 12:17:30 Searching for SCSI / ATAPI devices... I 12:17:30 Found 1 DVD?RW and 1 DVD?RW/RAM! I 12:17:42 Operation Started! I 12:17:42 Source File: D:\CD y DVD\EL_HOMBRE_SIN_SOMBRA.mds I 12:17:42 Source File Sectors: 3.750.640 (MODE1/2048) I 12:17:42 Source File Size: 7.681.310.720 bytes I 12:17:42 Source File Volume Identifier: EL_HOMBRE_SIN_SOMBRA I 12:17:42 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 12:17:42 Source File Implementation Identifier: ImgBurn I 12:17:42 Source File File System(s): ISO9660; UDF (1.02) I 12:17:42 Destination Device: [4:1:0] LITE-ON DVDRW LH-18A1H HL07 (F:) (SCSI) I 12:17:42 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x) I 12:17:42 Destination Media Sectors: 4.173.824 I 12:17:42 Write Mode: DVD I 12:17:42 Write Type: DAO I 12:17:42 Write Speed: 2x I 12:17:42 Link Size: Auto I 12:17:42 Test Mode: No I 12:17:42 BURN-Proof: Enabled I 12:17:42 Optimal L0 Data Zone Capacity: 1.993.280 I 12:17:42 Optimal L0 Data Zone Method: Copied From Original Disc I 12:19:08 Filling Buffer... (40 MB) I 12:19:09 Writing LeadIn... I 12:19:12 Writing Image... (LBA: 0 - 3750639) I 12:19:12 Writing Layer 0... (LBA: 0 - 1993279) I 12:39:54 Writing Layer 1... (LBA: 1993280 - 3750639) I 12:58:09 Synchronising Cache... I 12:58:13 Closing Track... W 12:59:22 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error W 13:01:15 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error W 13:02:29 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error E 13:02:30 Close Track Failed! - Reason: Power Calibration Area Error I 13:02:30 Closing Track (Last Attempt!)... I 13:02:31 Finalising Disc... I 13:05:58 Image MD5: d016ff05131259cb6e48ae6d13faf19c I 13:05:58 Operation Successfully Completed! - Duration: 00:48:15 I 13:05:58 Average Write Rate: 3.209 KB/s (2.3x) - Maximum Write Rate: 3.334 KB/s (2.4x) Link to comment Share on other sites More sharing options...
lfcrule1972 Posted April 24, 2007 Share Posted April 24, 2007 Mmm well I would be a bit worried if it was me, all you can really do is play it and see. What does ImgBurn show in the window in the right when you pop that disc back into your drive (write mode) ? You could copy paste the info here as that should say if the disc closed ok. Link to comment Share on other sites More sharing options...
errupin Posted April 24, 2007 Author Share Posted April 24, 2007 Mmm well I would be a bit worried if it was me, all you can really do is play it and see. What does ImgBurn show in the window in the right when you pop that disc back into your drive (write mode) ? You could copy paste the info here as that should say if the disc closed ok. Thanks for your interest. Here goes the information: LITE-ON DVDRW LH-18A1H HL07 (SCSI) Current Profile: DVD+R DL Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 3.750.640 Size: 7.681.310.720 bytes Time: 833:30:40 (MM:SS:FF) Supported Write Speeds: 2,4x; 4x DVD?R DL Boundary Information: L0 Data Zone Capacity: 1.993.280 Changeable: No TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 3750639) -> LeadOut (LBA: 3750640) Physical Format Information (ADIP): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.607 Last Physical Sector in Layer 0: 2.283.519 Physical Format Information (Last Recorded): Disc ID: MKM-001-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.344.687 Last Physical Sector in Layer 0: 2.189.887 Layer Information: Layer 0 Sectors: 1.993.280 (53,15%) Layer 1 Sectors: 1.757.360 (46,85%) Do you thing it looks OK? thanks Link to comment Share on other sites More sharing options...
lfcrule1972 Posted April 24, 2007 Share Posted April 24, 2007 Well it says Complete under Status, I would give it a go especially as the verify did finish in the end Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 24, 2007 Share Posted April 24, 2007 The 'Last Attempt' at closing the track seemed to work ok, so in theory, it should be fine. Link to comment Share on other sites More sharing options...
errupin Posted April 24, 2007 Author Share Posted April 24, 2007 The 'Last Attempt' at closing the track seemed to work ok, so in theory, it should be fine. Thanks for your help!! Link to comment Share on other sites More sharing options...
lfcrule1972 Posted April 24, 2007 Share Posted April 24, 2007 You can let us know how you get on if you like Link to comment Share on other sites More sharing options...
Recommended Posts