Problems changing book type

[giulio6105]

Hi,

 

I'm a new ImgBurn user and I would like to use the software to backup my PS2 games. I have found many tutorials in wich the procedure is described using DVDdecripter or ImgBurn.

Of course:

 

1. With READ mode I have made an ISO image of disk.

2. With WRITE mode I have burned it on a DVD-R disk.

3. I was unable to change the book type from DVD-R to DVD-ROM.

 

I'm working with a Fujitsu-Siemens laptop with a NEC ND-6500A +-RW dual-layer device.

 

In the change book type menu I have found only DVD+R. I must to change the type of disk or there is another type of problem?

 

Can you help me?

 

Thanks!!!

[blutach]

3. I was unable to change the book type from DVD-R to DVD-ROM.

That's because you can't change the booktype on -Rs, only on +Rs.

 

Regards

[giulio6105]

3. I was unable to change the book type from DVD-R to DVD-ROM.

That's because you can't change the booktype on -Rs, only on +Rs.

 

Regards

 

Thank you very much for your fast help! I will tray as soon as possible.

 

Regards

[giulio6105]

3. I was unable to change the book type from DVD-R to DVD-ROM.

That's because you can't change the booktype on -Rs, only on +Rs.

 

Regards

 

I have trayed to use DVD+R but now I was unable to burn ISO image on this type of support (I have used Verbatim DVD+R 16X disks.

The log file includes the following information:

I 12:12:54 ImgBurn Version 2.3.2.0 started!

I 12:12:54 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 12:12:54 Total Physical Memory: 1.047.916 KB - Available: 595.596 KB

I 12:12:55 Initialising SPTI...

I 12:12:55 Searching for SCSI / ATAPI devices...

I 12:12:55 Found 1 DVD?RW!

I 12:14:46 Operation Started!

I 12:14:46 Source File: C:\Documents and Settings\User\Documenti\ImageISO\LaGangDelBosco(PS2).iso

I 12:14:46 Source File Sectors: 786.976 (MODE1/2048)

I 12:14:46 Source File Size: 1.611.726.848 bytes

I 12:14:46 Source File Application Identifier: PLAYSTATION

I 12:14:46 Source File Implementation Identifier: DVD-ROM GENERATOR

I 12:14:46 Source File File System(s): ISO9660; UDF (1.02)

I 12:14:46 Destination Device: [1:0:0] _NEC DVD+-RW ND-6500A 2.40 (D:) (ATA)

I 12:14:46 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2,4x; 4x; 6x)

I 12:14:46 Destination Media Sectors: 2.295.104

I 12:14:46 Write Mode: DVD

I 12:14:46 Write Type: DAO

I 12:14:46 Write Speed: 2,4x

I 12:14:46 Link Size: Auto

I 12:14:46 Test Mode: No

I 12:14:46 BURN-Proof: Enabled

I 12:15:29 Filling Buffer... (40 MB)

I 12:15:31 Writing LeadIn...

W 12:15:50 Failed to Write Sectors 0 - 31 - Power Calibration Area Error

I 12:19:54 Synchronising Cache...

I 12:19:55 Closing Track...

I 12:19:56 Finalising Disc...

E 12:19:57 Failed to Write Image!

E 12:19:57 Operation Aborted! - Duration: 00:05:11

I 12:19:57 Average Write Rate: N/A - Maximum Write Rate: N/A

 

Can you help me? I'm newbie with no specific backgroud with this type of application.

 

regards

[dontasciime]

who makes your laptop ?

 

 

don't matter it's in your first post.

 

goto their website and see if they have a firmware update for that drive, unlikely as 2.40 is further up than nec version 2.25

 

 

this your laptop LIFEBOOK C1320

 

 

there seem to be a few people having problems with the 2.40 firmware, I emailed fujitsu asking where the other firmware is for this drive, they may reply, they may not.

 

Other people have used firmware 2.25 original firmware, search google on how to go to 2.25, liggy&dee

[giulio6105]

who makes your laptop ?

 

 

don't matter it's in your first post.

 

goto their website and see if they have a firmware update for that drive, unlikely as 2.40 is further up than nec version 2.25

 

 

this your laptop LIFEBOOK C1320

 

My laptop is Fujitsu-Siemens Amilo D 1845. I have checked for new firmware on Fujitsu-Siemens web site without success. There are two differnt firmware on NEC site 4.4 (for release before 4.2 and 4.1) and 2.4 (for release 2.2 and 2.1).

I think may be dangerous to update the firmware if I'm not sure to have the correct release.

 

Do you have any seggestion?

[dontasciime]

you cannot go from 4x series to 2x series or vice versa that is for sure

 

Anything you use would have to be in 2x range

 

If lappy is not old see where you bought it from or email fujitsu and tell them it's not working with expensive good quality media.

[LIGHTNING UK!]

Try using 8x Verbatim DVD+R rather than 16x. They're probably better suited to your drive.

[giulio6105]

Try using 8x Verbatim DVD+R rather than 16x. They're probably better suited to your drive.

 

I don't have this type of disk now. However, I have also tryed to burn my DVD+R with Nero having the same problem. This type is probably incompatible with my device. I want tray to install ImgBurn on another PC to verify this.

 

Many thanks to the community members!

[giulio6105]

Try using 8x Verbatim DVD+R rather than 16x. They're probably better suited to your drive.

 

I want tray to install ImgBurn on another PC to verify this.

 

Many thanks to the community members!

 

I have installed ImgBurn on another PC with OEM LG device. I was able to write ISO image on my Verbatim DVD+R 16X but I could not change book type from DVD+R to DVD-ROM. I have also tryed to set the device using the advanced buttom but any attempt was ineffectve!

 

What happens????

 

Can you help me? #39;(

[LIGHTNING UK!]

Before you burn your next discs, just try enabling the bitsetting manually.

 

If you get a 'Success' message, there's no reason for it not to work. If you don't and it fails, your drive must just not support bitsetting.

[blutach]

Yeah - before the 4163B came out, LG did not support bitsetting.

 

Regards