John B Posted May 15, 2007 Share Posted May 15, 2007 (edited) Image Burn cycles the tray out but doesn't close (in) to verify the disk after burning on my new "Pioneer DVD-RW DVR-109R" burner. The old toshiba burner works fine but is S-L-O-W Any fix for this one? I did a reply and I think I ruffled some fethers, but you'll have to bear with me while I learn how to post! here's the log cut and copied here: I 23:11:45 ImgBurn Version 2.3.2.0 started! I 23:11:45 Microsoft Windows 2000 Professional (5.0, Build 2195 : Service Pack 4) I 23:11:45 Total Physical Memory: 1,309,420 KB - Available: 1,014,920 KB I 23:11:45 Initialising SPTI... I 23:11:45 Searching for SCSI / ATAPI devices... I 23:11:46 Found 1 CD-RW, 1 DVD-RW and 1 DVD Edited May 17, 2007 by John B Link to comment Share on other sites More sharing options...
mmalves Posted May 16, 2007 Share Posted May 16, 2007 Can you post the log of such burn (Help/ImgBurn logs)? For the slow burning problem, check this post of the FAQ and see if it helps. Link to comment Share on other sites More sharing options...
cornholio7 Posted May 16, 2007 Share Posted May 16, 2007 did you have verify ticked? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 16, 2007 Share Posted May 16, 2007 It definitely sends an eject / insert command combo, so why it's not closing is anyone's guess! Just press the button on the drive manually to insert the disc and it'll start verifying if it's been told to. Link to comment Share on other sites More sharing options...
John B Posted May 17, 2007 Author Share Posted May 17, 2007 It definitely sends an eject / insert command combo, so why it's not closing is anyone's guess! Just press the button on the drive manually to insert the disc and it'll start verifying if it's been told to. John B It has verify checked. Pushing the button on the drive to insert the tray doesn't send it into verifying the disk To get the log I'll need to burn another disk. Link to comment Share on other sites More sharing options...
mmalves Posted May 17, 2007 Share Posted May 17, 2007 --> QUOTE(John B @ May 16 2007, 11:51 PM) <{POST_SNAPBACK}> To get the log I'll need to burn another disk. ImgBurn automatically saves the log, so you can get it by going to Help menu then ImgBurn logs. Link to comment Share on other sites More sharing options...
Recommended Posts