I/O Error!

InsomniaCalls · June 15, 2007

Hi there.

I'm trying to burn a backup of a game to a dual layer disk and get the following error:

---------------------------

ImgBurn

---------------------------

I/O Error!

Device: [0:0:0] LITE-ON DVDRW LH-20A1P KL05 (H:) (USB)

ScsiStatus: 0x02

Interpretation: Check Condition

CDB: 2A 00 00 21 4F 00 00 00 20 00

Interpretation: Write (10) - Sectors: 2182912 - 2182943

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00

Interpretation: Invalid Address For Write

---------------------------

Retry Cancel

---------------------------

Then when I click cancel:

---------------------------

ImgBurn

---------------------------

Finalise Disc Failed!

Device: [0:0:0] LITE-ON DVDRW LH-20A1P KL05 (H:) (USB)

Reason: Session Fixation Error Writing Lead Out

---------------------------

Retry Cancel

---------------------------

Here's the log file:

I 18:33:00 ImgBurn Version 2.3.2.0 started!

I 18:33:00 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000)

I 18:33:00 Total Physical Memory: 1,047,232 KB - Available: 421,180 KB

I 18:33:00 Initialising SPTI...

I 18:33:00 Searching for SCSI / ATAPI devices...

I 18:33:00 Found 1 DVD-ROM, 1 DVD

**mmalves** · June 15, 2007

I 18:36:30 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1P KL05 (H:) (USB)

I 18:36:30 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)

That media is crap. Try and get Verbatim DVD+R DL, as it's the only dual-layer media that works as it should. Also, there's a firmware update available for your burner (KL0G).

InsomniaCalls · June 15, 2007

I 18:36:30 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1P KL05 (H:) (USB)
I 18:36:30 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)

That media is crap. Try and get Verbatim DVD+R DL, as it's the only dual-layer media that works as it should. Also, there's a firmware update available for your burner (KL0G).

Fair play.

I'll apply the update and retry and if it still fails I'll get the Verbatim.

Thanks

Darl · June 15, 2007

Hi.

I 22:09:47 ImgBurn Version 2.3.2.0 started!

I 22:09:47 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 22:09:47 Total Physical Memory: 1

**mmalves** · June 15, 2007

I 22:09:57 Destination Device: [0:0:0] AOPEN DUW1608/ARR A110 (F:) (ATA)
I 22:09:57 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x)

There's a newer firmware available for your burner (A111), although that won't change the fact that your media is low quality. Please try and get Verbatim DVD+R DL and you'll never regret

Darl · June 16, 2007

I 22:09:57 Destination Device: [0:0:0] AOPEN DUW1608/ARR A110 (F:) (ATA)
I 22:09:57 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x)

There's a newer firmware available for your burner (A111), although that won't change the fact that your media is low quality. Please try and get Verbatim DVD+R DL and you'll never regret

Thanks, i will try Verbatim.

omarjarhead · October 29, 2007

apparently im having the same problem , but i dont know, its just that some times it works sometimes it doesnt, sometimes i can play my burned dvds on my play station 2 even when the imgburn says it was not complete , this is the case, with this particular movie.

sometimes it ejects the movie and gets it back, and still doesnt finish.

i really dont know if its the same problem all the time, i just saved this one. i use sony+r , i worked fine until i bought a different ones and stop working correctly, with any, except with one sony rewritable that i have i dont know the name of those dvds that screwed all up, they doesnt have a name , they are just white to print something on it.

i erased imageburn and download it again, and still doesnt work.

it works with some movies also, not all, i just burned kill bills both, and it worked fine, and beetween them i try another one, and i couldnt.

sometimes i use dvdshrink to save them in my hd, sometimes dvddecrypter, when i save them with dvddecrypter, i use dvdshrimk to compress them, and i build the dvd with imageburn

i/o error

device:(1:0:0)lite-om dvdrw shw-160p65 ps09 (d:) (ata)

ScsiStatus:0x02

interpretation: check condition

cdb: 2A 00 00 23 05 40 00 00 20 00

interpretation:write (10)-sectors 2295104-2295135

sense area: 70 00 05 00 00 00 00 0A 00 00 00 00 63 00 00 00 00 00

interpretation: end of user area encountered on this track

I 20:11:23 ImgBurn Version 2.3.2.0 started!

I 20:11:23 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 20:11:23 Total Physical Memory: 1,039,152 KB - Available: 496,120 KB

I 20:11:23 Initialising SPTI...

I 20:11:24 Searching for SCSI / ATAPI devices...

I 20:11:24 Found 1 DVD±RW!

I 20:12:07 Operation Started!

I 20:12:07 Building Image Tree...

I 20:12:07 Checking Directory Depth...

I 20:12:07 Calculating Totals...

I 20:12:07 Preparing Image...

I 20:12:07 Checking Path Length...

I 20:12:07 Image Size: 4,702,240,768 bytes

I 20:12:07 Image Sectors: 2,296,016

I 20:12:07 Operation Successfully Completed! - Duration: 00:00:00

I 20:23:17 Operation Started!

I 20:23:17 Building Image Tree...

I 20:23:20 Checking Directory Depth...

I 20:23:20 Calculating Totals...

I 20:23:20 Preparing Image...

I 20:23:20 Checking Path Length...

I 20:23:20 Image Size: 4,702,240,768 bytes

I 20:23:20 Image Sectors: 2,296,016

I 20:23:28 Operation Successfully Completed! - Duration: 00:00:11

W 20:23:44 User accepted disc space warning and is attempting to overburn!

I 20:23:45 Operation Started!

I 20:23:45 Source File: -==/\/[bUILD IMAGE]\/\==-

I 20:23:45 Source File Sectors: 2,296,016 (MODE1/2048)

I 20:23:45 Source File Size: 4,702,240,768 bytes

I 20:23:45 Source File Volume Identifier: THE UNTOUCHABLES

I 20:23:45 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 20:23:45 Source File Implementation Identifier: ImgBurn

I 20:23:45 Source File File System(s): ISO9660, UDF (1.02)

I 20:23:45 Destination Device: [1:0:0] LITE-ON DVDRW SHW-160P6S PS09 (D:) (ATA)

I 20:23:45 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 6x, 8x, 12x, 16x)

I 20:23:45 Destination Media Sectors: 2,295,104

I 20:23:45 Write Mode: DVD

I 20:23:45 Write Type: DAO

I 20:23:45 Write Speed: MAX

I 20:23:45 Link Size: Auto

I 20:23:45 Test Mode: No

I 20:23:45 BURN-Proof: Enabled

I 20:24:09 Filling Buffer... (40 MB)

I 20:24:11 Writing LeadIn...

I 20:25:10 Writing Image... (LBA: 0 - 2296015)

W 20:30:13 Failed to Write Sectors 2295104 - 2295135 - End of User Area Encountered on This Track

W 20:30:13 Retrying (1 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (2 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (3 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (4 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (5 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (6 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (7 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (8 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (9 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (10 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (11 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (12 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (13 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (14 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (15 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (16 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (17 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (18 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (19 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:30:18 Retrying (20 of 20)...

W 20:30:18 Retry Failed - Logical Block Address out of Range

W 20:36:12 Retrying (21)...

W 20:36:12 Retry Failed - Logical Block Address out of Range

W 20:36:15 Retrying (22)...

W 20:36:15 Retry Failed - Logical Block Address out of Range

W 20:36:16 Retrying (23)...

W 20:36:16 Retry Failed - Logical Block Address out of Range

E 20:36:17 Failed to Write Sectors 2295104 - 2295135 - End of User Area Encountered on This Track

I 20:36:17 Synchronising Cache...

I 20:36:18 Closing Track...

I 20:36:29 Finalising Disc...

E 20:36:45 Failed to Write Image!

E 20:36:45 Operation Failed! - Duration: 00:13:00

I 20:36:45 Average Write Rate: 6,881 KB/s (5.0x) - Maximum Write Rate: 21,994 KB/s (15.9x)

Edited October 29, 2007 by omarjarhead

**mmalves** · October 29, 2007

W 20:23:44 User accepted disc space warning and is attempting to overburn!
I 20:23:45 Source File Sectors: 2,296,016 (MODE1/2048)

I 20:23:45 Destination Media Sectors: 2,295,104

In this particular case the error happened because you've tried to burn more data than the disc supports. As for the other errors you've mentioned, they could be due to a lot of different things and we'd need the burn logs from those bad burns to know what exactly went wrong with them. You can find the older logs in Help/ImgBurn logs.

I 20:23:45 Destination Device: [1:0:0] LITE-ON DVDRW SHW-160P6S PS09 (D:) (ATA)

You might want to update your burner's firmware to the latest version available (PS0B), as having the latest firmware ensures good burns on all types of media.

omarjarhead · October 30, 2007

i downloaded the firmware, and, i try a different media, a sony, a still doesnt work, this time the ps2 doesnt even play at all the dvd. what do i do?, is the speed, too fast too slow, is it some setting that has to be adjusted, or is it just that my drive is screwed? tell me please that theres something i can do?

if i format my pc , would that fix the problem,? my pc has been having problems for quite some time now, it probably has virus or something

I 02:02:50 ImgBurn Version 2.3.2.0 started!

I 02:02:50 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 02:02:50 Total Physical Memory: 1,039,152 KB - Available: 497,504 KB

I 02:02:50 Initialising SPTI...

I 02:02:50 Searching for SCSI / ATAPI devices...

I 02:02:50 Found 1 DVD±RW!

I 02:30:48 Operation Started!

I 02:30:48 Building Image Tree...

I 02:30:51 Checking Directory Depth...

I 02:30:51 Calculating Totals...

I 02:30:51 Preparing Image...

I 02:30:51 Checking Path Length...

I 02:30:51 Image Size: 4,681,990,144 bytes

I 02:30:51 Image Sectors: 2,286,128

I 02:30:54 Operation Successfully Completed! - Duration: 00:00:06

I 02:30:54 Operation Started!

I 02:30:54 Source File: -==/\/[bUILD IMAGE]\/\==-

I 02:30:54 Source File Sectors: 2,286,128 (MODE1/2048)

I 02:30:54 Source File Size: 4,681,990,144 bytes

I 02:30:54 Source File Volume Identifier: SCHINDLERS_LIST

I 02:30:54 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 02:30:54 Source File Implementation Identifier: ImgBurn

I 02:30:54 Source File File System(s): ISO9660, UDF (1.02)

I 02:30:54 Destination Device: [1:0:0] LITE-ON DVDRW SHW-160P6S PS0B (D:) (ATA)

I 02:30:54 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 6x, 8x, 12x, 16x)

I 02:30:54 Destination Media Sectors: 2,295,104

I 02:30:54 Write Mode: DVD

I 02:30:54 Write Type: DAO

I 02:30:54 Write Speed: MAX

I 02:30:54 Link Size: Auto

I 02:30:54 Test Mode: No

I 02:30:54 BURN-Proof: Enabled

I 02:31:18 Filling Buffer... (40 MB)

I 02:31:20 Writing LeadIn...

I 02:32:18 Writing Image... (LBA: 0 - 2286127)

W 02:36:45 Failed to Write Sectors 1836160 - 1836191 - Write Error

W 02:36:45 Retrying (1 of 20)...