davehanson Posted June 25, 2007 Share Posted June 25, 2007 Hi there. I am new to writing to DVD, so please be gentle with me! Right basically I have a few movies on my PC that I would like to write to dvd. These movies were in an avi format, so I used avi2dvd to convert them. I now have a folder with an ISO image in it, and then another folder labled dvd with the Audio_TS and Video_TS in. From what I can grasp I should just open ImgBurn and just write the ISO image? When I do this I get the following message: I/O Error! Device [1:0:0] Plextor DVDR PX-716A (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 53 00 00 00 00 00 21 E8 90 00 Interpretation: Reserve Track- Sectors: 2,222,224 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 00 00 Interpretation: Command Sequence Error. I have also checked, and downloaded the latest firmware for the DVD drive. And I read the guide for building a single layer ISO on your hard drive, and then tried to burn that image to dvd, but got the same results. I am sorry if I am completely messing this up, but am totally confused as to what I am doing wrong. Thanks for any help, Dave. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 25, 2007 Share Posted June 25, 2007 Something is misbehaving and it's impossible to know what from the info you've provided. I'd need a complete log with I/O debug mode enabled before you click the 'Write' button. (press F8 to enable it). Enable it, start the burn, disable it. SAVE the log to a file and upload the file. Link to comment Share on other sites More sharing options...
Recommended Posts