stever Posted July 19, 2007 Posted July 19, 2007 when trying to make a disk everything works out fine. but when i put the disk in my dvd player there is no sound. Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 423,648 Size: 867,631,104 bytes Time: 94:10:48 (MM:SS:FF) Supported Write Speeds: 4x, 8x, 12x, 16x TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 423647) -> LeadOut (LBA: 423648) Physical Format Information (ADIP): Disc ID: RICOHJPN-R03-04 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: RICOHJPN-R03-04 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 620,255 Last Physical Sector in Layer 0: 0
kevdriver Posted July 19, 2007 Posted July 19, 2007 Stever, Sounds like a authoring problem. Img will only burn what its told to burn. Sounds ( no pun intended ) like there was no audio picked for the image during authoring. Hence Imgburn burn't the image with no sound.
LOCOENG Posted July 20, 2007 Posted July 20, 2007 I have a stupid question I must ask...speakers turned on?
kevdriver Posted July 20, 2007 Posted July 20, 2007 LOCO, You need the speakers turned on...........?
stever Posted July 20, 2007 Author Posted July 20, 2007 are the speaker turned on duh. why didnt i think of that. no seriously. dvd player as in sits on top of the television type of dvd player. you have the picture you have the sound type of dvd player cause i use an s video cable to connect the two. when i hit the options button about the disk,(this is all on the dvd player it a toshiba that has divx and a bunch of other things installed.) it tells me that there are two things the format of the vid and the type of sound be it stereo or mono.
dontasciime Posted July 20, 2007 Posted July 20, 2007 have you got downmix set to stereo in dvd player settings, so that 5.1 goes to 2 channel.
blutach Posted July 20, 2007 Posted July 20, 2007 Check there's audio in a software player. @donta - under the spec, all 5.1 is automatically downmixed to stereo when required. Regards
LOCOENG Posted July 21, 2007 Posted July 21, 2007 Could be DTS is all that is on the disc too...which isn't "doable" on all systems.
dontasciime Posted July 21, 2007 Posted July 21, 2007 @donta - under the spec, all 5.1 is automatically downmixed to stereo when required Nope sorry you got that slightly wrong a couple of my dvd players will not downmix to stereo automatically unless specified in settings on dvd player. Especially the ones that allow 5.1 output from 6 rca connectors. To the original poster Try the original or another original dvd in your dvd player and see if you get sound. If still no sound check your connections and check which format is being output from dvd player.
blutach Posted July 22, 2007 Posted July 22, 2007 Then, those players are off spec (of course, many players are in some way or another, but I haven't heard of any that don't downmix properly). Regards
stever Posted July 22, 2007 Author Posted July 22, 2007 its something im doing wrong with imagburn. have not figured that part out yet. i have tried the software 12 different ways normally i would just make a data disk and it will play in my dvd player. but for some odd reason this movie im trying to burn wont work. it is in mp4 format. i have tried to make it into an avi file an mpeg file and no luck what so ever. im just going to say to hell with it! i have spent close to 500.oo bucks u.s. on software and nothing is working. thanks for all the imput and help. if i could send this file to someone else and they could try it i would. because this is one headache i dont need. lol. i have been making movies from the interenet for a couple of years now and this one is kicking my arse. lol
LIGHTNING UK! Posted July 22, 2007 Posted July 22, 2007 It's nothing to do with ImgBurn, just forget about that idea and then maybe you'll find the real problem.
volvofl10 Posted July 22, 2007 Posted July 22, 2007 it is in mp4 format. you have to convert it into a DVD compliant structure , ImgBurn then burns the data to disc . ...........................................................Google is your friend i have been making movies from the interenet for a couple of years now and this one is kicking my arse. lol naughty naughty
stever Posted July 22, 2007 Author Posted July 22, 2007 hey light uk what i ment was I was doing something wrong not the software.
volvofl10 Posted July 22, 2007 Posted July 22, 2007 stever basically ................yes , it is you and not the program ImgBurn will burn any Image/iso that you want, but for it to play on a DVD player , it MUST be a DVD Compliant structure. An MP4 file isnt DVD compliant, so you need to make it DVD compliant , hence Google is your friend
blutach Posted July 22, 2007 Posted July 22, 2007 Unless his players specifically play MP4s and the like. (He did actually indicate that it did - see post 5) Regards
Recommended Posts