ridewaves Posted August 14, 2007 Posted August 14, 2007 Thought I solved my problems switching to Verbatim media.... now I get this. ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; Monday, 13 August 2007, 13:43:04 ; \\****************************************// ; ; I 13:10:11 ImgBurn Version 2.3.2.0 started! I 13:10:11 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 13:10:11 Total Physical Memory: 489,904 KB - Available: 261,216 KB I 13:10:11 Initialising SPTI... I 13:10:11 Searching for SCSI / ATAPI devices... I 13:10:11 Found 1 DVD±RW! I 13:11:04 Operation Started! I 13:11:04 Building Image Tree... I 13:11:04 Checking Directory Depth... I 13:11:04 Calculating Totals... I 13:11:04 Preparing Image... I 13:11:05 Checking Path Length... I 13:11:05 Image Size: 4,413,259,776 bytes I 13:11:05 Image Sectors: 2,154,912 I 13:11:05 Operation Successfully Completed! - Duration: 00:00:00 I 13:12:51 Operation Started! I 13:12:51 Building Image Tree... I 13:12:53 Checking Directory Depth... I 13:12:53 Calculating Totals... I 13:12:53 Preparing Image... I 13:12:54 Checking Path Length... I 13:12:54 Image Size: 4,413,259,776 bytes I 13:12:54 Image Sectors: 2,154,912 I 13:12:55 Operation Successfully Completed! - Duration: 00:00:03 I 13:12:55 Operation Started! I 13:12:55 Source File: -==/\/[bUILD IMAGE]\/\==- I 13:12:55 Source File Sectors: 2,154,912 (MODE1/2048) I 13:12:55 Source File Size: 4,413,259,776 bytes I 13:12:55 Source File Volume Identifier: 2006 I 13:12:55 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 13:12:55 Source File Implementation Identifier: ImgBurn I 13:12:55 Source File File System(s): ISO9660, UDF (1.02) I 13:12:55 Destination Device: [1:0:0] TSSTcorp CD/DVDW TS-L532R HA04 (D:) (ATA) I 13:12:55 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2x, 4x) I 13:12:55 Destination Media Sectors: 2,298,496 I 13:12:55 Write Mode: DVD I 13:12:55 Write Type: DAO I 13:12:55 Write Speed: 2.4x I 13:12:55 Link Size: Auto I 13:12:55 Test Mode: No I 13:12:55 BURN-Proof: Enabled I 13:12:55 Filling Buffer... (20 MB) I 13:12:57 Writing LeadIn... I 13:13:08 Writing Image... (LBA: 0 - 2154911) I 13:39:50 Synchronising Cache... I 13:41:16 Image MD5: c8913eee1b60a67e944d2c07a1f2ce09 I 13:41:16 Operation Successfully Completed! - Duration: 00:28:20 I 13:41:16 Average Write Rate: 2,691 KB/s (1.9x) - Maximum Write Rate: 2,833 KB/s (2.0x) I 13:41:16 Cycling Tray before Verify... W 13:41:22 Waiting for device to become ready... W 13:41:34 Device Not Ready - Unable to Recover TOC W 13:41:34 Retrying (1 of 3)... I 13:41:34 Cycling Tray before Verify... W 13:41:38 Waiting for device to become ready... W 13:41:47 Retry Failed - Unable to Recover TOC W 13:41:47 Retrying (2 of 3)... I 13:41:47 Cycling Tray before Verify... W 13:41:52 Waiting for device to become ready... W 13:42:00 Retry Failed - Unable to Recover TOC W 13:42:00 Retrying (3 of 3)... I 13:42:00 Cycling Tray before Verify... W 13:42:04 Waiting for device to become ready... I 13:42:52 Abort Request Acknowledged E 13:42:53 Device Not Ready - Unable to Recover TOC E 13:42:53 Operation Aborted! I 13:43:04 Close Request Acknowledged I 13:43:04 Closing Down... I 13:43:04 Shutting down SPTI... I 13:43:04 ImgBurn closed! Just trying to backup some files in build mode. It will eject the disk then say "cycling tray to verify..." when I close the drive it says "Abort Request Acknowledged" followed by "Device Not Ready - Unable to Recover TOC". I suck at this so any help would be appreciated. Thanks.
LIGHTNING UK! Posted August 14, 2007 Posted August 14, 2007 Basically, the drive is producing bad burns on that media and can't reinitialise the disc once the tray has been cycled. The usual things apply: Check for firmware updates Try different discs (Verbatim DVD+R's perhaps?) Clean the drive Buy a new drive
ridewaves Posted August 14, 2007 Author Posted August 14, 2007 Basically, the drive is producing bad burns on that media and can't reinitialise the disc once the tray has been cycled. The usual things apply: Check for firmware updates Try different discs (Verbatim DVD+R's perhaps?) Clean the drive Buy a new drive Thank you... will give it a shot.
Recommended Posts