magicalpath Posted August 26, 2007 Posted August 26, 2007 Hi, I borrowed a disc recorded from TV from a friend using a JVC DVD recorder. I'm sorry, I don't know the model. I tried read the image to create an ISO on the HDD and get a warning message that the following space requirements are required and exist: Required: 8,795,690,336,256 bytes (8,388,233MB) Remaining: 481,438,957,568 bytes (459,135MB) Firstly, the DVD disc is single layer, so 4.7GB in size. It reads and plays fine in a DVD player software package. The harddrive is actually 2x320GB drives in a RAID array (448GB free space). The option to continue anyway doesn't work, as it says not enough free space. Here are the details from the disc: BENQ DVD LS DW1655 BCIB (SCSI) Current Profile: DVD-RW Disc Information: Status: Complete Erasable: Yes Sessions: 1 Sectors: 4,294,770,672 Size: 8,795,690,336,256 bytes Time: 954393:30:72 (MM:SS:FF) TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 4294770671) -> LeadOut (LBA: 4294770672) Pre-recorded Information: Manufacturer ID: JVC_VictorW7 Physical Format Information (Last Recorded): Book Type: DVD-RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,777,199 Last Physical Sector in Layer 0: 0 To show that Windows is reading the disc correctly, here is the DOS directory listing: E:\VIDEO_TS>dir Volume in drive E is JVC DVD_ROM Volume Serial Number is 76C0-0608 Directory of E:\VIDEO_TS 26/08/2007 02:14 p.m. <DIR> . 26/08/2007 02:14 p.m. <DIR> .. 26/08/2007 02:14 p.m. 12,288 VIDEO_TS.BUP 26/08/2007 02:14 p.m. 12,288 VIDEO_TS.IFO 26/08/2007 02:14 p.m. 88,064 VIDEO_TS.VOB 26/08/2007 02:14 p.m. 104,448 VTS_01_0.BUP 26/08/2007 02:14 p.m. 104,448 VTS_01_0.IFO 26/08/2007 02:14 p.m. 1,073,709,056 VTS_01_1.VOB 26/08/2007 02:14 p.m. 1,073,709,056 VTS_01_2.VOB 26/08/2007 02:14 p.m. 915,654,656 VTS_01_3.VOB 8 File(s) 3,063,394,304 bytes 2 Dir(s) 0 bytes free The recording in question is a movie, so approximately 2.5 hours long, not the 954393:30:72 reported. The IMP_ID is given as JVC DVD_ROM UDF, and the drive doesn't auto finalise. Without being finalised it is unreadable under Windows. Hence it has been manually finalised and works as described above, and doesn't work being Read by ImgBurn. As the disc isn't copy protected and is to watch a legally recorded show I can dump it to the HDD as folders/files, but I had intended to do it as an ISO and watch using VLC. Makes it nice and easy to watch then delete. Regards, Graeme
LIGHTNING UK! Posted August 26, 2007 Posted August 26, 2007 I can't do anything with that. The drive is reporting some enormous size for the disc. Sectors: 4,294,770,672 TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 4294770671) -> LeadOut (LBA: 4294770672) I can only go by what it's telling me.
blutach Posted August 26, 2007 Posted August 26, 2007 Anyway, try copying the IFO, VOB and BUP files to a new folder on the hard drive using Windows Explorer. Then use ImgBurn in build mode. Regards
Recommended Posts