Raz&Mickey Posted August 31, 2007 Share Posted August 31, 2007 I'm new with this program and got it started fine. But when it starts I get a I/O Error Message on any dvd I try. I tried slowing the speed down like the other logs stated to do, but it still didn't work. Hope I can get some help. Thanks! Attached is one of the logs; I 17:45:59 Operation Started! I 17:45:59 Source Device: [0:1:0] SONY CDRW/DVD CRX835E KDKE (D:) (ATA) I 17:45:59 Source Media Type: DVD-ROM I 17:45:59 Source Media Sectors: 4,169,920 (Track Path: OTP - L0: 2,084,960 - L1: 2,084,960) I 17:45:59 Source Media Volume Identifier: Saw_3_Unrated I 17:45:59 Source Media Implementation Identifier: DVDAfterEdit I 17:45:59 Source Media File System(s): ISO9660, UDF (1.02) I 17:45:59 Destination File: C:\Saw_3_Unrated.iso I 17:45:59 Destination Free Space: 24,111,214,592 bytes (23,546,108 KB) (22,994 MB) (22 GB) I 17:45:59 Destination File System: NTFS I 17:45:59 File Splitting: Auto I 17:45:59 Reading Sectors... (LBA: 0 - 4169919) I 17:45:59 Reading Layer 0... (LBA: 0 - 2084959) E 17:46:06 Failed to Read Sector 1567 - Read of Scrambled Sector Without Authentication E 17:46:06 Failed to Read Sectors! E 17:46:06 Operation Failed! - Duration: 00:00:07 E 17:46:06 Average Read Rate: 438 KB/s (0.3x) - Maximum Read Rate: 1,259 KB/s (0.9x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 31, 2007 Share Posted August 31, 2007 ImgBurn won't copy protected discs. Link to comment Share on other sites More sharing options...
Recommended Posts