boomish Posted September 3, 2007 Posted September 3, 2007 I get this all the time, some weird command sequnce error, I have to cancel out of it as I have done here before it starts to turn the dic into a coaster, then I press burn again and it's fine. Any idea's Cheers Boomish I 11:39:59 ImgBurn Version 2.3.2.0 started! I 11:39:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 11:39:59 Total Physical Memory: 1,048,048 KB - Available: 446,900 KB I 11:39:59 Initialising SPTI... I 11:39:59 Searching for SCSI / ATAPI devices... I 11:39:59 Found 1 DVD±RW and 1 Unknown! I 11:42:35 Operation Started! I 11:42:35 Source File: F:\MOvies\The.Nativity.Story.DVDR-Replica\rep-nativity\rep-nativity.ISO I 11:42:35 Source File Sectors: 2,192,242 (MODE1/2048) I 11:42:35 Source File Size: 4,489,711,616 bytes I 11:42:35 Source File Volume Identifier: THE_NATIVITY_STORY I 11:42:35 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 11:42:35 Source File Implementation Identifier: mkisofs I 11:42:35 Source File File System(s): ISO9660, UDF (1.02) I 11:42:35 Destination Device: [0:2:0] PIONEER DVD-RW DVR-111D 1.29 (D:) (ATA) I 11:42:35 Destination Media Type: None! I 11:42:35 Destination Media Sectors: 2,298,496 I 11:42:35 Write Mode: DVD I 11:42:35 Write Type: DAO I 11:42:35 Write Speed: 1x I 11:42:35 Link Size: Auto I 11:42:35 Test Mode: No I 11:42:35 BURN-Proof: Enabled I 11:42:36 Filling Buffer... (20 MB) I 11:42:37 Writing LeadIn... W 11:42:37 Failed to Write Sectors 0 - 31 - Command Sequence Error W 11:42:37 Retrying (1 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (2 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (3 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (4 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (5 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (6 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (7 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (8 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (9 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (10 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (11 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (12 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (13 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (14 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (15 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (16 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (17 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (18 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (19 of 20)... W 11:42:37 Retry Failed - Command Sequence Error W 11:42:37 Retrying (20 of 20)... W 11:42:37 Retry Failed - Command Sequence Error E 11:42:38 Failed to Write Sectors 0 - 31 - Command Sequence Error I 11:42:38 Synchronising Cache... I 11:42:39 Closing Track... E 11:42:41 Close Track Failed! - Reason: Illegal Mode For This Track I 11:42:41 Closing Track (Last Attempt!)... E 11:42:41 Close Track Failed! - Reason: Illegal Mode For This Track I 11:42:41 Closing Session... E 11:42:41 Close Session Failed! - Reason: Illegal Mode For This Track I 11:42:41 Closing Session (Last Attempt!)... E 11:42:41 Close Session Failed! - Reason: Illegal Mode For This Track I 11:42:41 Finalising Disc... E 11:42:42 Finalise Disc Failed! - Reason: Illegal Mode For This Track I 11:42:42 Finalising Disc (Last Attempt!)... E 11:42:42 Finalise Disc Failed! - Reason: Illegal Mode For This Track E 11:42:42 Failed to Write Image! E 11:42:42 Operation Failed! - Duration: 00:00:06 I 11:42:42 Average Write Rate: N/A - Maximum Write Rate: N/A
Shamus_McFartfinger Posted September 3, 2007 Posted September 3, 2007 I 11:42:35 Destination Media Type: None! Get some good media like Taiyo Yuden or Verbatim. Your drive doesn't even recognise the ones you are using.
boomish Posted September 3, 2007 Author Posted September 3, 2007 I 11:42:35 Destination Media Type: None! Get some good media like Taiyo Yuden or Verbatim. Your drive doesn't even recognise the ones you are using. They are Taiyo Yuden! or at least should be I have the invoice here in front of me saying they are..and every burn I have done with them has been excellent. I wonder if there is another way of reading the blank cd info Thanks for the tip tho I never thought it might be the media.
LIGHTNING UK! Posted September 3, 2007 Posted September 3, 2007 It would appear the drive just isn't initialising the disc properly the first time around then. Eject + reinsert the tray (when you've got one of the blanks in it) and then copy + paste the info from the panel on the right in the main ImgBurn window.
boomish Posted September 3, 2007 Author Posted September 3, 2007 It would appear the drive just isn't initialising the disc properly the first time around then. Eject + reinsert the tray (when you've got one of the blanks in it) and then copy + paste the info from the panel on the right in the main ImgBurn window. Yep I see it Pre-recorded Information: Manufacturer ID: TYG02 it seems to happen when I first boot Imgburn, I don't think it's a disc error, I closed and reopened Imgburn and it was fine. I shall test some more at least I now know what the problem is thanks. why it happens I dunno yet.
LIGHTNING UK! Posted September 3, 2007 Posted September 3, 2007 I was hoping to see all the info if that's ok! I need to see it from when it *doesn't* work so I can figure out why.
boomish Posted September 3, 2007 Author Posted September 3, 2007 more problems see the error at the end of the disc write, something def not right it never used to be this unreliable. BTW if I use Nero , it burns fine every time..same media I 14:15:40 ImgBurn Version 2.3.2.0 started! I 14:15:40 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 14:15:40 Total Physical Memory: 1,048,048 KB - Available: 373,540 KB I 14:15:40 Initialising SPTI... I 14:15:40 Searching for SCSI / ATAPI devices... I 14:15:41 Found 1 DVD±RW and 1 Unknown! I 14:16:28 Operation Started! I 14:16:28 Source File: I:\MOvies\Bridge.To.Terabithia.2007.PAL.DVDr-PaTHe\brtote\BRIDGE_TO_TERABITHIA.iso I 14:16:28 Source File Sectors: 2,286,115 (MODE1/2048) I 14:16:28 Source File Size: 4,681,963,520 bytes I 14:16:28 Source File Volume Identifier: BRIDGE_TO_TERABITHIA I 14:16:28 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 14:16:28 Source File Implementation Identifier: mkisofs I 14:16:28 Source File File System(s): ISO9660, UDF (1.02) I 14:16:28 Destination Device: [0:2:0] PIONEER DVD-RW DVR-111D 1.29 (D:) (ATA) I 14:16:28 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x, 12x) I 14:16:28 Destination Media Sectors: 2,298,496 I 14:16:28 Write Mode: DVD I 14:16:28 Write Type: DAO I 14:16:28 Write Speed: 1x I 14:16:28 Link Size: Auto I 14:16:28 Test Mode: No I 14:16:28 BURN-Proof: Enabled I 14:16:29 Filling Buffer... (20 MB) I 14:16:30 Writing LeadIn... I 14:17:01 Writing Image... (LBA: 0 - 2286114) I 14:31:09 Synchronising Cache... W 14:31:22 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Write Error I 14:34:28 Image MD5: 298b93e97a59530bed40e5fd2cd7abb9 I 14:34:28 Operation Successfully Completed! - Duration: 00:18:00 I 14:34:28 Average Write Rate: 5,391 KB/s (3.9x) - Maximum Write Rate: 5,671 KB/s (4.1x)
dontasciime Posted September 3, 2007 Posted September 3, 2007 why are you choosing 1x burn them at their rated speed of 8x What is the uknown device btw something def not right it never used to be this unreliable.BTW if I use Nero , it burns fine every time..same media Unless that is a re-writable disc How can you say that.
LIGHTNING UK! Posted September 3, 2007 Posted September 3, 2007 Switch the 'Write Type' in the Settings to 'Incremental' rather than 'DAO'. It shouldn't make a different but for some system/drive/firmware/media combo's it does. It's also possible Nero doesn't look for / detect errors during these final stages. The program isn't actually doing anything at this point, it's just polling the drive to see if the operation (in this case, 'Sync Cache') has completed yet. The drive reported a 'Write Error' and so ImgBurn simply tells you about it.
boomish Posted September 4, 2007 Author Posted September 4, 2007 why are you choosing 1x burn them at their rated speed of 8x What is the uknown device btw something def not right it never used to be this unreliable.BTW if I use Nero , it burns fine every time..same media Unless that is a re-writable disc How can you say that. If I have the time I always thought burning a dvd-r at 1x was the best to assure it worked ok. the unknown device is a VOBID instantcd drive, it might be something to do with Nero, I must work out where it's from and get rid of it. na def not a re-writable disc btw instant copy and clone cd all burn ok too, it's just imgburn that has problems. that was naother coaster it burned yesterday, maybe I should give up using it, pity I have used it for years and always thought it was the best, my system is obviously corrupted somehwere for it to work properly.
LIGHTNING UK! Posted September 4, 2007 Posted September 4, 2007 That last burn appeared ok to me (ignoring the retry for the sync cache command)... what exactly is a 'coaster' about it? Why don't you verify the disc as part of the burn? Then at least we'd be able to tell if the drive can read it back. Oh and you've not needed to burn at 1x for a long time. If anything, you'll be using better strategies at 8x and get a better burn.
dontasciime Posted September 4, 2007 Posted September 4, 2007 reinstall your operating system then it's simple. Unless your writer has had it and only seems to like incremental writing.
Mudhoney Posted September 25, 2007 Posted September 25, 2007 I'm having a similar problem. Is my media too crappy (Shintaro)? I upgraded my DVD-RW firmware to latest last night. Putting it in incremental mode seems to help but it seems to hang near the end of the burn with the dvd-rw still spinning. PIONEER DVD-RW DVR-212 1.22 (ATAPI) Current Profile: DVD-R Disc Information: Status: Empty Erasable: No Free Sectors: 2,298,496 Free Space: 4,707,319,808 bytes Free Time: 510:48:46 (MM:SS:FF) Supported Write Speeds: 4x, 6x, 8x, 12x, 16x Pre-recorded Information: Manufacturer ID: CMC MAG. AM3 Recording Management Area Information: PIONEER DVD-RW DVR-212 Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0
Mudhoney Posted September 25, 2007 Posted September 25, 2007 error log: I 21:43:02 Operation Started! I 21:43:02 Source File: C:\Users\xxxx\file.iso I 21:43:02 Source File Sectors: 2,279,243 (MODE1/2048) I 21:43:02 Source File Size: 4,667,889,664 bytes I 21:43:02 Source File Volume Identifier: file I 21:43:02 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 21:43:02 Source File Implementation Identifier: mkisofs I 21:43:02 Source File File System(s): ISO9660, UDF (1.02) I 21:43:02 Destination Device: [0:0:0] PIONEER DVD-RW DVR-212 1.22 (D:) (ATAPI) I 21:43:02 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x) I 21:43:02 Destination Media Sectors: 2,298,496 I 21:43:02 Write Mode: DVD I 21:43:02 Write Type: DAO I 21:43:02 Write Speed: MAX I 21:43:02 Link Size: Auto I 21:43:02 Test Mode: No I 21:43:02 BURN-Proof: Enabled I 21:43:05 Filling Buffer... (40 MB) I 21:43:06 Writing LeadIn... W 21:43:06 Failed to Write Sectors 0 - 31 - Command Sequence Error W 21:43:06 Retrying (1 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (2 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (3 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (4 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (5 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (6 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (7 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (8 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (9 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (10 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (11 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (12 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (13 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (14 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (15 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (16 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (17 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (18 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (19 of 20)... W 21:43:06 Retry Failed - Command Sequence Error W 21:43:06 Retrying (20 of 20)... W 21:43:06 Retry Failed - Command Sequence Error E 21:43:07 Failed to Write Sectors 0 - 31 - Command Sequence Error I 21:43:07 Synchronising Cache... E 21:43:08 Failed to Write Image! E 21:43:09 Operation Failed! - Duration: 00:00:06 I 21:43:09 Average Write Rate: N/A - Maximum Write Rate: N/A
LIGHTNING UK! Posted September 25, 2007 Posted September 25, 2007 Unless a command is failing somewhere, I don't know what the issue is there. Sorry. (Trying something other than CMC media might help though) Assuming you're running that drive (sata controller) in AHCI mode, any chance you could put it back to std ATA mode and try again? My sata drives just show up as ATA so it could be a driver issue.
Mudhoney Posted September 26, 2007 Posted September 26, 2007 (edited) yep i'll try to do that tonight, if I can work how to change from AHCI to ATA. I assume this can be done from BIOS? edit: actually I think it hangs off the same controller as my HDDs so i'm not keen on changing it away from AHCI. THe motherboard does have a separate SATA controller that is used for eSATA and other things, so I can enable that. Will try later. Edited September 26, 2007 by Mudhoney
dontasciime Posted September 26, 2007 Posted September 26, 2007 The settings in your bios will give a choice, change from AHCI to IDE. I prefer this mode as you get no problems mixing SATA and PATA . I also do not notice any difference in speed.
Mudhoney Posted September 26, 2007 Posted September 26, 2007 Ok i just tried plugging the burner into the alternative SATA ports (different SATA controller to HDD) in IDE mode and the machine froze at the first BIOS screen. Put it back to the regular SATA ports and it boots again.
Mudhoney Posted September 26, 2007 Posted September 26, 2007 Oh, and I can't really change my main SATA controller to IDE mode because the choices are IDE, RAID and AHCI, and I'm running RAID-0 so can't really be changing that.
LIGHTNING UK! Posted September 26, 2007 Posted September 26, 2007 That's one of the reasons I forgot about RAID 0 when putting in my latest board and after a hdd died in my last set taking 1TB of data with it. I knew I needed to have 2 SATA optical drives on the new board (after Intel removed the IDE port from their chipsets - doh!) and in testing I found them to be much more reliable when running as standard ATA rather than RAID/AHCI. The hdds I've got will do 90mb/s anyway so RAID-0 isn't that big of a deal. Not only that, they're only storage drives.
Mudhoney Posted September 26, 2007 Posted September 26, 2007 sounds like I'm out of feasible options. Thanks for the help anyway.
Mudhoney Posted September 29, 2007 Posted September 29, 2007 also tried with TDK DVD-R media - same result
dontasciime Posted September 29, 2007 Posted September 29, 2007 start again and ditch raid for the time being and just use sata in IDE mode or accept the fact that you bought a dvd writer you cannot use. which motherboard is it as you have, it has to have other options with sata
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now