steve dodd Posted September 12, 2007 Share Posted September 12, 2007 I'm new to this entire process. I'm taking video from a Samsung DVD camcorder. They've loaded fine into ImgBurn as individual iso files for each DVD. I can write individual files to separate DVD-RW disks and they play on all of my DVD players. But, when I write multiple files on a single DVD-RW, they no longer play. Is there a way to consolidate multiple iso files so they'll play? I even tried Build which created a single ISO file on my hard drive but when I burnt it, it separated the files on the DVD and still would not play. What am I doing wrong? Also, one other issue, I can only write to a new DVD-RW. If I erase the disk (even with ImgBurn) and try again, I get an error. SCCI Status OxO2 Check Condition Incompatible format Failed to reserve track Reason: Cannot write medium Incompatible Format. Here is the log: LITE-ON DVDRW LH-20A1P KL0G (ATA) Current Profile: DVD-RW Disc Information: Status: Empty Erasable: Yes Supported Write Speeds: 2x Pre-recorded Information: Manufacturer ID: CMCW02 Physical Format Information (Last Recorded): Book Type: DVD-RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: 10.08Mbps Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 1,126,127 Last Physical Sector in Layer 0: 0 Thanks! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 12, 2007 Share Posted September 12, 2007 An ISO is a disc image. You can't merge them, they must each be burnt to their own discs. If you break the ISO down and extract the files from within it (mount in DAEMON Tools + copy the files out of the virtual drive using Explorer), you could then combine them that way. It's a bit more complicated than that but it's beyond the scope of this 'ImgBurn' forum. As for the error, check for firmware updates and try different discs. Your drive seems to have issues burning to media using the CMCW02 dye. Link to comment Share on other sites More sharing options...
steve dodd Posted September 12, 2007 Author Share Posted September 12, 2007 An ISO is a disc image. You can't merge them, they must each be burnt to their own discs. If you break the ISO down and extract the files from within it (mount in DAEMON Tools + copy the files out of the virtual drive using Explorer), you could then combine them that way. It's a bit more complicated than that but it's beyond the scope of this 'ImgBurn' forum. As for the error, check for firmware updates and try different discs. Your drive seems to have issues burning to media using the CMCW02 dye. Thanks, is there any other way to use ImgBurn to consolidate the DVD Video's from my camcorde? If not, could you suggest an alternative? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 12, 2007 Share Posted September 12, 2007 No, ImgBurn is just a burning tool. What you need is something that can reauthor multiple titles / dvds into a whole new one. I've never wanted / needed to do that so I can't really help. That said, you can find help on just about anything if you search Google. Link to comment Share on other sites More sharing options...
Recommended Posts