machser Posted October 2, 2007 Posted October 2, 2007 (edited) Hi, I just got an error with a Dual-Layer burn. It was drive's 2nd Dual Layer disc so I've got no experience with that. Hope you can find something in the log. The drive sits on the 2nd IDE-channel as master. I just found a firmware update to 1.07. Is it the media or the drive ? Error message: Finalise Disc Failed! Device: [3:0:0] PLEXTOR DVDR PX-760A 1.06 (H:) (ATA) Reason: Empty or Partially Written Reserved Track Log: I 23:00:12 ImgBurn Version 2.3.2.0 started! I 23:00:12 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:00:12 Total Physical Memory: 2.095.840 KB - Available: 1.544.100 KB I 23:00:12 Initialising SPTI... I 23:00:12 Searching for SCSI / ATAPI devices... I 23:00:12 Found 4 DVD-ROMs and 1 DVD±RW! I 23:20:39 Operation Started! I 23:20:39 Source File: N:\_BRENNEN\Kontakt2\Kontakt2Tutorial.iso I 23:20:39 Source File Sectors: 3.080.943 (MODE1/2048) I 23:20:39 Source File Size: 6.309.771.264 bytes I 23:20:39 Source File Volume Identifier: MYVIDEO I 23:20:39 Source File Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT © 1997-2005 SONIC SOLUTIONS, INC. - HAVE A NICE DAY I 23:20:39 Source File File System(s): ISO9660; Joliet I 23:20:39 Destination Device: [3:0:0] PLEXTOR DVDR PX-760A 1.06 (H:) (ATA) I 23:20:39 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x) I 23:20:39 Destination Media Sectors: 4.173.824 I 23:20:39 Write Mode: DVD I 23:20:39 Write Type: DAO I 23:20:39 Write Speed: 4x I 23:20:39 Link Size: Auto I 23:20:39 Test Mode: No I 23:20:39 BURN-Proof: Enabled I 23:20:40 Optimal L0 Data Zone Capacity: 1.540.480 I 23:20:40 Optimal L0 Data Zone Method: ECC Block Boundary I 23:20:40 Filling Buffer... (256 MB) I 23:20:44 Writing LeadIn... W 23:21:23 Failed to Write Sectors 32 - 63 - Power Calibration Area Error W 23:21:23 Retrying (1 of 20)... I 23:21:23 Writing LeadIn... I 23:21:45 Writing Image... (LBA: 0 - 3080942) I 23:21:45 Writing Layer 0... (LBA: 0 - 1540479) I 23:31:19 Writing Layer 1... (LBA: 1540480 - 3080942) I 23:40:54 Synchronising Cache... I 23:40:57 Closing Track... I 23:40:58 Finalising Disc... E 23:43:59 Finalise Disc Failed! - Reason: Empty or Partially Written Reserved Track I 23:43:59 Finalising Disc (Last Attempt!)... E 23:43:59 Finalise Disc Failed! - Reason: Empty or Partially Written Reserved Track E 23:43:59 Failed to Write Image! E 23:44:03 Operation Failed! - Duration: 00:23:19 I 23:44:03 Average Write Rate: 5.362 KB/s (3.9x) - Maximum Write Rate: 5.618 KB/s (4.1x) Edited October 2, 2007 by machser
LIGHTNING UK! Posted October 2, 2007 Posted October 2, 2007 Try some Verbatim 2.4x DVD+R DL media. If they don't work, you'll know it's the drive. If they do, it must have been the media. Either way, update the firmware first.
machser Posted October 3, 2007 Author Posted October 3, 2007 okay, thanks for your reply... there are two cruel things happening with this burn: 1. 2nd ide-channel, where the dvd-burner sits on, reports to drive in PIO mode, earlier Ultra-DMA-4 mode, other burns with dvd-r media are running at 0,7 KB/s 2. it can be reset to DMA by deinstalling the 2nd channel from windows only and reboot the system to let it recognize it again, otherwise it would be set to PIO forever I need to get some of the Verbatim blanks to confirm.
Recommended Posts