Jump to content

Adding a file to a disc


Rockfang

Recommended Posts

Hi,

 

I have a dual layer dvd with info on it, but it isn't full. Can I add a file to it with ImgBurn? Below is the info from the status box while in write mode:

 

SONY DVD RW DRU-810A 2.0d (USB)

Current Profile: DVD+R DL

 

Disc Information:

Status: Incomplete

Erasable: No

Sessions: 2

Sectors: 3,715,392

Size: 7,609,122,816 bytes

Time: 825:40:42 (MM:SS:FF)

Supported Write Speeds: 2.4x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 2,086,912

Changeable: No

 

TOC Information:

Session 1...

-> Track 01 (Mode 1, LBA: 0 - 3715391)

-> LeadOut (LBA: 3715392)

 

Physical Format Information (ADIP):

Disc ID: CMC MAG-D01-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded):

Disc ID: CMC MAG-D01-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Layer Information:

Layer 0 Sectors: 2,086,912 (56.17%)

Layer 1 Sectors: 1,628,480 (43.83%)

 

With the status as "incomplete", it appears like the disc is still writable. Any ideas?

Link to comment
Share on other sites

You can't do that with ImgBurn since ImgBurn doesn't support multisession in any way. You'll need a burning software that supports burning to multisession DVDs.

 

Physical Format Information (ADIP):

Disc ID: CMC MAG-D01-00

Backup the information that's on this disc while you still can.

 

//edit Please read again :thumbup:

Edited by mmalves
Link to comment
Share on other sites

Thank you both for the help. Mmalves, my apologies. While I do see your wink now, I don't remember seeing the first line of your response. :) It might have been your avatar that distracted me. ;)

 

As a side note, is that in a FAQ/guide anywhere. If not, might I suggest that it gets added? Just a suggestion.

Edited by Rockfang
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.