Jump to content

Cant get TV/DVD player to read discs(now w/ log)


Recommended Posts

Posted (edited)

i dl'ed dvd flick and imgburn as a suggestion from another board because i would burn discs, and could view them but couldnt hear the sound on the TV. Anyway, burned the same TS file via img burn using a CD+R Dynex. Now the TV/DVD player says it cant play disc and playback funtion isnt allowed.

 

 

SO i guess I am asking...does the problem lie in the fact that I need Verbatim discs as suggested here, or does imgburn burn it different than the program i used before...or is my DVD player not compatible with the way imgburn burned it. fairly new at this and after 2 days about to pull my hair out. any help is apprecaited

 

could vista be the underlying problem?

Edited by jhk
Posted (edited)

sure, how do i go about doing that..sorry im not sure how

 

do you mean after the burn is complete and the disc pops out, click on verify in the box up top and then tell you what it says?

Edited by jhk
Posted

Click the verify box BEFORE you burn, then it'll do both, one after the other.

 

Once that's done, copy + paste everything from the Log window (Click the View menu and then 'Log' to make it visible - and then don't close it next time :) )

Posted
Click the verify box BEFORE you burn, then it'll do both, one after the other.

 

Once that's done, copy + paste everything from the Log window (Click the View menu and then 'Log' to make it visible - and then don't close it next time :) )

 

 

will do..thanks...just tried again..my tv and dvd player are separate and it sasy "disc not playable, please check the TV system..i am about to burn another and will post the log

Posted
'TV System' ?

 

Maybe it's a PAL / NTSC issue then.

 

Is whatever you're trying to burn/play in the correct format for your hardware?

 

 

not sure what a PAL/NTSC is, but how come i could see it but not hear when i dl'ed ith with win dvd, but now not at all..i guess that is what i was kind of getting at..does imgburn, burn it a diff way than other players

Posted
'TV System' ?

 

Maybe it's a PAL / NTSC issue then.

 

Is whatever you're trying to burn/play in the correct format for your hardware?

 

 

not sure what a PAL/NTSC is, but how come i could see it but not hear when i dl'ed ith with win dvd, but now not at all..i guess that is what i was kind of getting at..does imgburn, burn it a diff way than other players

 

 

about to burn another disc...go to the DVD file and it says audio_TS and video_TS

 

am i suppose to be opening the audio file as well?

Posted

now when i go to burn, it displays:

 

ISO Write mode is for burning disc images, not VIDEO_TS files

 

Switch to ISO Build mode, add your video_ts folder to the list and then create image

 

if you dint know what you're doing, read some guides :lol:

 

what did i do wrong this time?

Posted

I 12:56:53 ImgBurn Version 2.3.2.0 started!

I 12:56:53 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)

I 12:56:53 Total Physical Memory: 980,992 KB - Available: 471,456 KB

W 12:56:53 Drive F:\ (FAT32) does not support single files > 4 GB in size.

I 12:56:53 Initialising SPTI...

I 12:56:53 Searching for SCSI / ATAPI devices...

I 12:56:53 Found 1 DVD±RW/RAM!

I 13:10:19 Operation Started!

I 13:10:19 Building Image Tree...

I 13:10:25 Checking Directory Depth...

I 13:10:25 Calculating Totals...

I 13:10:25 Preparing Image...

I 13:10:25 Checking Path Length...

I 13:10:25 Image Size: 4,402,020,352 bytes

I 13:10:25 Image Sectors: 2,149,424

I 13:10:29 Operation Successfully Completed! - Duration: 00:00:10

I 13:10:29 Operation Started!

I 13:10:29 Image Contents: 23 Files, 2 Folders

I 13:10:29 Image Sectors: 2,149,424

I 13:10:29 Image Size: 4,402,020,352 bytes

I 13:10:29 Image Single Layer Profile: DVD-R/RW (Media Capacity: 2,298,496)

I 13:10:29 Image Volume Identifier: dvd

I 13:10:29 Image Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 13:10:29 Image Implementation Identifier: ImgBurn

I 13:10:29 Image File System(s): ISO9660, UDF (1.02)

I 13:10:29 Destination File: C:\Users\johnhkerr\dvd\VIDEO_TS\WSP1.iso

I 13:10:29 Destination Free Space: 71,319,232,512 bytes (69,647,688 KB) (68,015 MB) (66 GB)

I 13:10:29 Destination File System: NTFS

I 13:10:29 File Splitting: Auto

I 13:10:29 Writing Image...

I 13:14:55 Image MD5: 376d77c73ceea98e7efe624997ce8123

I 13:14:55 Operation Successfully Completed! - Duration: 00:04:25

I 13:14:55 Average Write Rate: 16,222 KB/s (11.7x) - Maximum Write Rate: 28,186 KB/s (20.4x)

I 13:15:35 Operation Started!

I 13:15:35 Source File: C:\Users\johnhkerr\dvd\VIDEO_TS\WSP1.iso

I 13:15:35 Source File Sectors: 2,149,424 (MODE1/2048)

I 13:15:35 Source File Size: 4,402,020,352 bytes

I 13:15:35 Source File Volume Identifier: dvd

I 13:15:35 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 13:15:35 Source File Implementation Identifier: ImgBurn

I 13:15:35 Source File File System(s): ISO9660, UDF (1.02)

I 13:15:35 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-T10N PC05 (E:) (ATA)

I 13:15:35 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 4x)

I 13:15:35 Destination Media Sectors: 2,295,104

I 13:15:35 Write Mode: DVD

I 13:15:35 Write Type: DAO

I 13:15:35 Write Speed: MAX

I 13:15:35 Link Size: Auto

I 13:15:35 Test Mode: No

I 13:15:35 BURN-Proof: Enabled

I 13:15:35 Filling Buffer... (20 MB)

I 13:15:36 Writing LeadIn...

I 13:16:04 Writing Image... (LBA: 0 - 2149423)

I 13:29:42 Synchronising Cache...

I 13:29:43 Closing Track...

I 13:29:47 Finalising Disc...

I 13:30:50 Image MD5: 376d77c73ceea98e7efe624997ce8123

I 13:30:50 Operation Successfully Completed! - Duration: 00:15:15

I 13:30:50 Average Write Rate: 5,255 KB/s (3.8x) - Maximum Write Rate: 5,658 KB/s (4.1x)

I 13:30:50 Cycling Tray before Verify...

W 13:30:54 Waiting for device to become ready...

Posted

Where's the verify bit?

 

Or is that as far as it got?

 

You've got 16x media there and the drive is only showing 4x as a supported speed - which basically means it doesn't support it.

 

If a drive doesn't support the media properly you'll get a rubbish burn.

 

So get yourself some decent Taiyo Yuden or Verbatim media and try again.

Posted
Where's the verify bit?

 

Or is that as far as it got?

 

You've got 16x media there and the drive is only showing 4x as a supported speed - which basically means it doesn't support it.

 

If a drive doesn't support the media properly you'll get a rubbish burn.

 

So get yourself some decent Taiyo Yuden or Verbatim media and try again.

 

 

off to the store...it plays on my laptop and pc but not my tv..strange..im wondering if its the DVD player

Posted
If it plays in the pc (from the drive you were buring in?) why didn't your log include info from the verify stage too?

 

You seem to have cut it short.

 

 

how come my dvd-rom drive opened when done?

Posted
It's meant to do that. When using a laptop burner you have to re-close it manually. A normal writer will eject (cycle) and the close and start to verify.

 

I 14:48:23 ImgBurn Version 2.3.2.0 started!

I 14:48:23 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)

I 14:48:23 Total Physical Memory: 980,992 KB - Available: 444,508 KB

W 14:48:23 Drive F:\ (FAT32) does not support single files > 4 GB in size.

I 14:48:23 Initialising SPTI...

I 14:48:23 Searching for SCSI / ATAPI devices...

I 14:48:23 Found 1 DVD±RW/RAM!

I 14:48:47 Operation Started!

I 14:48:47 Source File: C:\Users\johnhkerr\dvd\VIDEO_TS\WSP1.iso

I 14:48:47 Source File Sectors: 2,149,424 (MODE1/2048)

I 14:48:47 Source File Size: 4,402,020,352 bytes

I 14:48:48 Source File Volume Identifier: dvd

I 14:48:48 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 14:48:48 Source File Implementation Identifier: ImgBurn

I 14:48:48 Source File File System(s): ISO9660, UDF (1.02)

I 14:48:48 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-T10N PC05 (E:) (ATA)

I 14:48:48 Destination Media Type: DVD-R (Disc ID: MCC 02RG20) (Speeds: 4x, 8x)

I 14:48:48 Destination Media Sectors: 2,297,888

I 14:48:48 Write Mode: DVD

I 14:48:48 Write Type: DAO

I 14:48:48 Write Speed: MAX

I 14:48:48 Link Size: Auto

I 14:48:48 Test Mode: No

I 14:48:48 BURN-Proof: Enabled

I 14:48:48 Filling Buffer... (20 MB)

I 14:48:48 Writing LeadIn...

I 14:49:39 Writing Image... (LBA: 0 - 2149423)

I 14:59:09 Synchronising Cache...

I 14:59:28 Image MD5: 376d77c73ceea98e7efe624997ce8123

I 14:59:28 Operation Successfully Completed! - Duration: 00:10:40

I 14:59:28 Average Write Rate: 7,555 KB/s (5.5x) - Maximum Write Rate: 11,062 KB/s (8.0x)

I 14:59:28 Cycling Tray before Verify...

W 14:59:33 Waiting for device to become ready...

I 15:06:31 Device Ready!

I 15:06:31 Operation Started!

I 15:06:31 Source Device: [0:0:0] HL-DT-ST DVDRAM GSA-T10N PC05 (E:) (ATA)

I 15:06:31 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 02RG20) (Speeds: 4x, 8x)

I 15:06:31 Image File: C:\Users\johnhkerr\dvd\VIDEO_TS\WSP1.iso

I 15:06:31 Image File Sectors: 2,149,424 (MODE1/2048)

I 15:06:31 Image File Size: 4,402,020,352 bytes

I 15:06:31 Image File Volume Identifier: dvd

I 15:06:31 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 15:06:31 Image File Implementation Identifier: ImgBurn

I 15:06:31 Image File File System(s): ISO9660, UDF (1.02)

I 15:06:31 Verifying Sectors... (LBA: 0 - 2149423)

I 15:25:10 Device MD5: 376d77c73ceea98e7efe624997ce8123

I 15:25:10 Image MD5: 376d77c73ceea98e7efe624997ce8123

I 15:25:10 Operation Successfully Completed! - Duration: 00:18:38

I 15:25:10 Average Verify Rate: 3,845 KB/s (2.8x) - Maximum Verify Rate: 5,535 KB/s (4.0x)

Posted
That looks better / fine :)

 

Does it play?

 

If not, what does the disc look like (folder wise) if you open it in Explorer?

 

its got to be my DVD player...tried everything...im chalking it up to not being readable..plays in my car dvd player and both pc and laptop

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.