empire Posted December 14, 2007 Posted December 14, 2007 (edited) Hello. While I was burning a double layer DVD+R DL (Verbatim 2,4x) a got an I/O Error as shown below: I/O Error! Device:[1:1:0]ATAPI DVD A DH20A3H YP5S(F:)(ATA) ScsiStatus:0x02 Interpretation: Check Condition CDB: AD 00 00 00 00 00 00 20 00 0C 00 00 Interpretation: Read Disc Structure - DVD+R DL Boundary Information Sense Area: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80 FF FF Interpretation: Logical Unit not ready, Long Write in progress Below this message I had two choices: again (in dutch: opnieuw) or cancel (in dutch: annuleren). Whatever I choose, the burning process did go on. After I while I got a message that the burning process had been succesfully. I checked the DVD and in my opinion the disc is OK. Because of the Error Message I am not sure the disc is OK. Can anybody explain the Error Message I got. Maybe someone can give me instructions so that I won't get this message again. Edited December 14, 2007 by empire
empire Posted December 14, 2007 Author Posted December 14, 2007 fine but post the log file Where can I find the log file and how do I post that file
dontasciime Posted December 14, 2007 Posted December 14, 2007 open ImgBurn click help and choose ImgBurn logs then double click the log file it shows you or the last one it saved etc it should open up in notepad then click edit select all right click copy then reply to this post and in the window right click and choose paste
LIGHTNING UK! Posted December 14, 2007 Posted December 14, 2007 When does this actually pop up? Before the burn or after it?
empire Posted December 16, 2007 Author Posted December 16, 2007 When does this actually pop up? Before the burn or after it? Before the burn.
empire Posted December 16, 2007 Author Posted December 16, 2007 open ImgBurn click help and choose ImgBurn logs then double click the log file it shows you or the last one it saved etc it should open up in notepad then click edit select all right click copy then reply to this post and in the window right click and choose paste ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; vrijdag, 14 december 2007, 00:37:50 ; \\****************************************// ; ; I 22:54:12 ImgBurn Version 2.3.2.0 started! I 22:54:12 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 22:54:12 Total Physical Memory: 1.048.048 KB - Available: 544.660 KB I 22:54:12 Initialising SPTI... I 22:54:12 Searching for SCSI / ATAPI devices... I 22:54:12 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 22:56:54 Operation Started! I 22:56:54 Source File: I:\ACDC - Plug Me In Special Edition - DVD3\ACDC - Plug Me In Special Edition - DVD3.mds I 22:56:54 Source File Sectors: 3.521.648 (MODE1/2048) I 22:56:54 Source File Size: 7.212.335.104 bytes I 22:56:54 Source File Volume Identifier: ACDC_PLUG_ME_IN_SE_DVD3 I 22:56:54 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 22:56:54 Source File Implementation Identifier: ImgBurn I 22:56:54 Source File File System(s): ISO9660; UDF (1.02) I 22:56:54 Destination Device: [1:1:0] ATAPI DVD A DH20A3H YP5S (F:) (ATA) I 22:56:54 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x) I 22:56:54 Destination Media Sectors: 4.173.824 I 22:56:54 Write Mode: DVD I 22:56:54 Write Type: DAO I 22:56:54 Write Speed: MAX I 22:56:54 Link Size: Auto I 22:56:54 Test Mode: No I 22:56:54 BURN-Proof: Enabled I 22:56:54 Optimal L0 Data Zone Capacity: 1.824.064 I 22:56:54 Optimal L0 Data Zone Method: Copied From Original Disc W 22:58:48 Failed to check L0 Data Zone Capacity! I 22:58:49 Filling Buffer... (40 MB) I 22:58:51 Writing LeadIn... I 22:58:53 Writing Image... (LBA: 0 - 3521647) I 22:58:53 Writing Layer 0... (LBA: 0 - 1824063) I 23:17:37 Writing Layer 1... (LBA: 1824064 - 3521647) I 23:35:04 Synchronising Cache... I 23:35:30 Closing Track... I 23:35:33 Finalising Disc... I 23:37:46 Image MD5: 17a8742a669d73b749c34dd63ef3f9d5 I 23:37:46 Operation Successfully Completed! - Duration: 00:40:51 I 23:37:46 Average Write Rate: 3.244 KB/s (2.3x) - Maximum Write Rate: 3.360 KB/s (2.4x) I 23:37:46 Cycling Tray before Verify... W 23:37:53 Waiting for device to become ready... I 23:38:19 Device Ready! I 23:38:20 Operation Started! I 23:38:20 Source Device: [1:1:0] ATAPI DVD A DH20A3H YP5S (F:) (ATA) I 23:38:20 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-001-00) (Speeds: 2,4x) I 23:38:20 Image File: I:\ACDC - Plug Me In Special Edition - DVD3\ACDC - Plug Me In Special Edition - DVD3.mds I 23:38:20 Image File Sectors: 3.521.648 (MODE1/2048) I 23:38:20 Image File Size: 7.212.335.104 bytes I 23:38:20 Image File Volume Identifier: ACDC_PLUG_ME_IN_SE_DVD3 I 23:38:20 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 23:38:20 Image File Implementation Identifier: ImgBurn I 23:38:20 Image File File System(s): ISO9660; UDF (1.02) I 23:38:20 Verifying Sectors... (LBA: 0 - 3521647) I 23:38:20 Verifying Layer 0... (LBA: 0 - 1824063) I 23:43:55 Verifying Layer 1... (LBA: 1824064 - 3521647) I 23:48:49 Device MD5: 17a8742a669d73b749c34dd63ef3f9d5 I 23:48:49 Image MD5: 17a8742a669d73b749c34dd63ef3f9d5 I 23:48:49 Operation Successfully Completed! - Duration: 00:10:29 I 23:48:49 Average Verify Rate: 11.197 KB/s (8.1x) - Maximum Verify Rate: 15.753 KB/s (11.4x) I 00:37:50 Close Request Acknowledged I 00:37:50 Closing Down... I 00:37:50 Shutting down SPTI... I 00:37:50 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; donderdag, 13 december 2007, 22:50:39 ; \\****************************************// ; ; I 22:50:20 ImgBurn Version 2.3.2.0 started! I 22:50:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 22:50:20 Total Physical Memory: 1.048.048 KB - Available: 551.352 KB I 22:50:21 Initialising SPTI... I 22:50:21 Searching for SCSI / ATAPI devices... I 22:50:21 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 22:50:38 Close Request Acknowledged I 22:50:38 Closing Down... I 22:50:39 Shutting down SPTI... I 22:50:39 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; woensdag, 12 december 2007, 01:04:54 ; \\****************************************// ; ; I 01:02:50 ImgBurn Version 2.3.2.0 started! I 01:02:50 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 01:02:50 Total Physical Memory: 1.048.048 KB - Available: 389.096 KB I 01:02:50 Initialising SPTI... I 01:02:50 Searching for SCSI / ATAPI devices... I 01:02:50 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 01:04:54 Close Request Acknowledged I 01:04:54 Closing Down... I 01:04:54 Shutting down SPTI... I 01:04:54 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; woensdag, 12 december 2007, 00:45:08 ; \\****************************************// ; ; I 23:51:47 ImgBurn Version 2.3.2.0 started! I 23:51:47 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:51:47 Total Physical Memory: 1.048.048 KB - Available: 363.092 KB I 23:51:48 Initialising SPTI... I 23:51:48 Searching for SCSI / ATAPI devices... I 23:51:48 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 23:53:57 Operation Started! I 23:53:57 Building Image Tree... I 23:53:57 Checking Directory Depth... I 23:53:57 Calculating Totals... I 23:53:57 Preparing Image... I 23:55:41 Using Layer Break LBA: 1824059 -> 1824064 (VTS_01, PGC: 6, Chapter: 1, Cell: 1, Vob/Cell ID: 2/12, Time: 00:00:00, SPLIP: No) I 23:55:42 Checking Path Length... I 23:55:42 Image Size: 7.212.335.104 bytes I 23:55:42 Image Sectors: 3.521.648 I 23:55:42 Operation Successfully Completed! - Duration: 00:01:44 I 00:03:48 Operation Started! I 00:03:48 Building Image Tree... I 00:03:48 Checking Directory Depth... I 00:03:48 Calculating Totals... I 00:03:48 Preparing Image... I 00:06:08 Using Layer Break LBA: 1824059 -> 1824064 (VTS_01, PGC: 6, Chapter: 1, Cell: 1, Vob/Cell ID: 2/12, Time: 00:00:00, SPLIP: No) I 00:06:08 Checking Path Length... I 00:06:08 Image Size: 7.212.335.104 bytes I 00:06:08 Image Sectors: 3.521.648 I 00:06:26 Operation Successfully Completed! - Duration: 00:02:38 I 00:06:26 Operation Started! I 00:06:26 Image Contents: 13 Files, 2 Folders I 00:06:26 Image Sectors: 3.521.648 I 00:06:26 Image Size: 7.212.335.104 bytes I 00:06:26 Image Layer Break Position: 1.824.064 I 00:06:26 Image Single Layer Profile: DVD+R/RW (Media Capacity: 2.295.104) I 00:06:26 Image Double Layer Profile: DVD+R DL (Min L0: 0, Max L0: 2.086.912, Media Capacity: 4.173.824) I 00:06:26 Image Volume Identifier: ACDC_PLUG_ME_IN_SE_DVD3 I 00:06:26 Image Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 00:06:26 Image Implementation Identifier: ImgBurn I 00:06:26 Image File System(s): ISO9660, UDF (1.02) I 00:06:26 Destination File: I:\ACDC - Plug Me In Special Edition - DVD3\ACDC - Plug Me In Special Edition - DVD3.iso I 00:06:26 Destination Free Space: 12.289.953.792 bytes (12.001.908 KB) (11.720 MB) (11 GB) I 00:06:26 Destination File System: NTFS I 00:06:26 File Splitting: Auto I 00:06:27 Writing Image... I 00:18:44 Image MD5: 17a8742a669d73b749c34dd63ef3f9d5 I 00:18:44 Operation Successfully Completed! - Duration: 00:12:17 I 00:18:44 Average Write Rate: 9.556 KB/s (6.9x) - Maximum Write Rate: 14.283 KB/s (10.3x) I 00:45:07 Close Request Acknowledged I 00:45:07 Closing Down... I 00:45:08 Shutting down SPTI... I 00:45:08 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; dinsdag, 11 december 2007, 23:44:59 ; \\****************************************// ; ; I 23:43:32 ImgBurn Version 2.3.2.0 started! I 23:43:32 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:43:32 Total Physical Memory: 1.048.048 KB - Available: 345.532 KB I 23:43:32 Initialising SPTI... I 23:43:32 Searching for SCSI / ATAPI devices... I 23:43:32 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 23:44:59 Close Request Acknowledged I 23:44:59 Closing Down... I 23:44:59 Shutting down SPTI... I 23:44:59 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; zaterdag, 08 december 2007, 01:15:20 ; \\****************************************// ; ; I 23:24:23 ImgBurn Version 2.3.2.0 started! I 23:24:23 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:24:23 Total Physical Memory: 1.048.048 KB - Available: 401.212 KB I 23:24:23 Initialising SPTI... I 23:24:23 Searching for SCSI / ATAPI devices... I 23:24:23 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 23:25:07 Operation Started! I 23:25:07 Source File: I:\Mijn muziek DVD's\Gotthard - Made In Switserland[1]\Gotthard - Made In Switserland\GOTTHARD.MDS I 23:25:07 Source File Sectors: 3.970.480 (MODE1/2048) I 23:25:07 Source File Size: 8.131.543.040 bytes I 23:25:07 Source File Volume Identifier: GOTTHARD I 23:25:07 Source File Application Identifier: NERO BURNING ROM I 23:25:07 Source File Implementation Identifier: Nero I 23:25:07 Source File File System(s): ISO9660; UDF (1.02) I 23:25:07 Destination Device: [1:1:0] ATAPI DVD A DH20A3H YP5S (F:) (ATA) I 23:25:07 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x) I 23:25:07 Destination Media Sectors: 4.173.824 I 23:25:07 Write Mode: DVD I 23:25:07 Write Type: DAO I 23:25:07 Write Speed: 2,4x I 23:25:07 Link Size: Auto I 23:25:07 Test Mode: No I 23:25:07 BURN-Proof: Enabled I 23:25:07 Optimal L0 Data Zone Capacity: 1.985.472 I 23:25:07 Optimal L0 Data Zone Method: Copied From Original Disc I 23:26:15 Filling Buffer... (40 MB) I 23:26:16 Writing LeadIn... I 23:26:18 Writing Image... (LBA: 0 - 3970479) I 23:26:18 Writing Layer 0... (LBA: 0 - 1985471) I 23:46:42 Writing Layer 1... (LBA: 1985472 - 3970479) I 00:07:06 Synchronising Cache... I 00:07:10 Closing Track... I 00:07:12 Finalising Disc... I 00:08:06 Image MD5: bf3d43478b174b977ce87d7d8149d967 I 00:08:06 Operation Successfully Completed! - Duration: 00:42:58 I 00:08:06 Average Write Rate: 3.243 KB/s (2.3x) - Maximum Write Rate: 3.360 KB/s (2.4x) I 00:08:06 Cycling Tray before Verify... W 00:08:13 Waiting for device to become ready... I 00:08:39 Device Ready! I 00:08:39 Operation Started! I 00:08:39 Source Device: [1:1:0] ATAPI DVD A DH20A3H YP5S (F:) (ATA) I 00:08:39 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-001-00) (Speeds: 2,4x) I 00:08:39 Image File: I:\Mijn muziek DVD's\Gotthard - Made In Switserland[1]\Gotthard - Made In Switserland\GOTTHARD.MDS I 00:08:39 Image File Sectors: 3.970.480 (MODE1/2048) I 00:08:39 Image File Size: 8.131.543.040 bytes I 00:08:39 Image File Volume Identifier: GOTTHARD I 00:08:39 Image File Application Identifier: NERO BURNING ROM I 00:08:39 Image File Implementation Identifier: Nero I 00:08:39 Image File File System(s): ISO9660; UDF (1.02) I 00:08:40 Verifying Sectors... (LBA: 0 - 3970479) I 00:08:40 Verifying Layer 0... (LBA: 0 - 1985471) I 00:14:35 Verifying Layer 1... (LBA: 1985472 - 3970479) I 00:20:25 Device MD5: bf3d43478b174b977ce87d7d8149d967 I 00:20:25 Image MD5: bf3d43478b174b977ce87d7d8149d967 I 00:20:25 Operation Successfully Completed! - Duration: 00:11:45 I 00:20:25 Average Verify Rate: 11.263 KB/s (8.1x) - Maximum Verify Rate: 16.341 KB/s (11.8x) I 01:15:20 Close Request Acknowledged I 01:15:20 Closing Down... I 01:15:20 Shutting down SPTI... I 01:15:20 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; vrijdag, 07 december 2007, 23:07:32 ; \\****************************************// ; ; I 21:58:44 ImgBurn Version 2.3.2.0 started! I 21:58:44 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:58:44 Total Physical Memory: 1.048.048 KB - Available: 362.616 KB I 21:58:44 Initialising SPTI... I 21:58:44 Searching for SCSI / ATAPI devices... I 21:58:44 Found 3 DVD-ROMs and 1 DVD±RW/RAM! I 22:02:29 Operation Started! I 22:02:29 Source File: I:\Ratatouille_DVD_9.par2[1]\Ratatouille DVD 9\Ratatouille DVD 9\RATATOUILLE.mds I 22:02:29 Source File Sectors: 3.965.856 (MODE1/2048) I 22:02:29 Source File Size: 8.122.073.088 bytes I 22:02:29 Source File Volume Identifier: RATATOUILLE I 22:02:29 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 22:02:29 Source File Implementation Identifier: ImgBurn I 22:02:29 Source File File System(s): ISO9660; UDF (1.02) I 22:02:29 Destination Device: [1:1:0] ATAPI DVD A DH20A3H YP5S (F:) (ATA) I 22:02:29 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x) I 22:02:29 Destination Media Sectors: 4.173.824 I 22:02:29 Write Mode: DVD I 22:02:29 Write Type: DAO I 22:02:29 Write Speed: 2,4x I 22:02:29 Link Size: Auto I 22:02:29 Test Mode: No I 22:02:29 BURN-Proof: Enabled I 22:02:29 Optimal L0 Data Zone Capacity: 2.016.096 I 22:02:29 Optimal L0 Data Zone Method: Copied From Original Disc W 22:02:59 Failed to check L0 Data Zone Capacity! I 22:03:00 Filling Buffer... (40 MB) I 22:03:01 Writing LeadIn... I 22:03:08 Writing Image... (LBA: 0 - 3965855) I 22:03:08 Writing Layer 0... (LBA: 0 - 2016095) I 22:23:51 Writing Layer 1... (LBA: 2016096 - 3965855) I 22:43:53 Synchronising Cache... I 22:43:58 Closing Track... I 22:44:00 Finalising Disc... I 22:45:35 Image MD5: 80c12ee5379635fcc2194afb2787e019 I 22:45:35 Operation Successfully Completed! - Duration: 00:43:06 I 22:45:35 Average Write Rate: 3.244 KB/s (2.3x) - Maximum Write Rate: 3.340 KB/s (2.4x) I 22:45:35 Cycling Tray before Verify... W 22:45:42 Waiting for device to become ready... I 22:46:08 Device Ready! I 22:46:08 Operation Started! I 22:46:08 Source Device: [1:1:0] ATAPI DVD A DH20A3H YP5S (F:) (ATA) I 22:46:08 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-001-00) (Speeds: 2,4x) I 22:46:08 Image File: I:\Ratatouille_DVD_9.par2[1]\Ratatouille DVD 9\Ratatouille DVD 9\RATATOUILLE.mds I 22:46:08 Image File Sectors: 3.965.856 (MODE1/2048) I 22:46:08 Image File Size: 8.122.073.088 bytes I 22:46:08 Image File Volume Identifier: RATATOUILLE I 22:46:08 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 22:46:08 Image File Implementation Identifier: ImgBurn I 22:46:08 Image File File System(s): ISO9660; UDF (1.02) I 22:46:08 Verifying Sectors... (LBA: 0 - 3965855) I 22:58:08 Device MD5: 80c12ee5379635fcc2194afb2787e019 I 22:58:08 Image MD5: 80c12ee5379635fcc2194afb2787e019 I 22:58:08 Operation Successfully Completed! - Duration: 00:11:59 I 22:58:08 Average Verify Rate: 11.031 KB/s (8.0x) - Maximum Verify Rate: 16.410 KB/s (11.8x) I 23:07:32 Close Request Acknowledged I 23:07:32 Closing Down... I 23:07:32 Shutting down SPTI... I 23:07:32 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; vrijdag, 07 december 2007, 21:46:15 ; \\****************************************// ; ; I 21:45:21 ImgBurn Version 2.3.2.0 started! I 21:45:21 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:45:21 Total Physical Memory: 1.048.048 KB - Available: 333.376 KB I 21:45:21 Initialising SPTI... I 21:45:21 Searching for SCSI / ATAPI devices... I 21:45:21 Found 3 DVD-ROMs and 1 DVD±RW/RAM! I 21:46:14 Close Request Acknowledged I 21:46:14 Closing Down... I 21:46:15 Shutting down SPTI... I 21:46:15 ImgBurn closed!
LIGHTNING UK! Posted December 16, 2007 Posted December 16, 2007 Wow, 'DH20A3H YP5S' gets 1 result in Google and this page is it! lol I'm not aware that setting the LB position is something I have to 'wait' for before then checking it again - certainly it's not something I've come across before with any other drives. You might find that updating the drives firmware to the latest one will fix the issue. http://club.cdfreaks.com/1952787-post659.html Try the 4th link down in that post - i.e. http://www.yourfilehost.com/media.php?cat=...5P_HT695WIN.rar
empire Posted December 17, 2007 Author Posted December 17, 2007 Wow, 'DH20A3H YP5S' gets 1 result in Google and this page is it! lol I'm not aware that setting the LB position is something I have to 'wait' for before then checking it again - certainly it's not something I've come across before with any other drives. You might find that updating the drives firmware to the latest one will fix the issue. http://club.cdfreaks.com/1952787-post659.html Try the 4th link down in that post - i.e. http://www.yourfilehost.com/media.php?cat=...5P_HT695WIN.rar What do you mean with "Wow, ......" Do I have an old drive or a very new one? I have the drive for about 3 weeks. My old drive was broken so they switched it with this one.
chewy Posted December 17, 2007 Posted December 17, 2007 newer drive with buggy early firmware DH20A3H YP5U was out in sept?
empire Posted December 17, 2007 Author Posted December 17, 2007 newer drive with buggy early firmware DH20A3H YP5U was out in sept? Where can I download the firmware you are mentioning?
chewy Posted December 17, 2007 Posted December 17, 2007 if I remember right, that post LuK linked to over at cdfreaks is one of the firmware writters from liteon and that firmware linked is a test firmware intended to fix problems welcome to the beta tester world go for it
empire Posted December 22, 2007 Author Posted December 22, 2007 if I remember right, that post LuK linked to over at cdfreaks is one of the firmware writters from liteon and that firmware linked is a test firmware intended to fix problems welcome to the beta tester world go for it I updated the firmware to version DH20A3H YP5U but I still receive the same I/O Error.
empire Posted December 22, 2007 Author Posted December 22, 2007 Wow, 'DH20A3H YP5S' gets 1 result in Google and this page is it! lol I'm not aware that setting the LB position is something I have to 'wait' for before then checking it again - certainly it's not something I've come across before with any other drives. You might find that updating the drives firmware to the latest one will fix the issue. http://club.cdfreaks.com/1952787-post659.html Try the 4th link down in that post - i.e. http://www.yourfilehost.com/media.php?cat=...5P_HT695WIN.rar What do you mean with "Wow, ......" Do I have an old drive or a very new one? I have the drive for about 3 weeks. My old drive was broken so they switched it with this one. I updated the drives firmware to version DH20A3H YP5U but I still receive the same I/O Error.
LIGHTNING UK! Posted December 22, 2007 Posted December 22, 2007 You really need to direct this issue to LiteOn now. The command used to set the L0 data zone capacity (i.e. the layer break) is not supposed to return control to the program until it's actually finished doing it. Perhaps you could try the firmware I pointed out? You can actually reply in that cdfreaks thread and have a chance at talking to 'Wind' who is a liteon employee I believe, and the one actually working on the firmware. If there's an issue I'm sure he'll fix it. Out of interest, even when you get that error pop up, if you leave it for 30 seconds (or more?), does hitting 'Retry' work? It's not anything vital anyway.
Recommended Posts