dvdburn0r Posted December 20, 2007 Posted December 20, 2007 I am trying to burn a .iso of a dvd backup but it gets stuck just after the lead-in when it says "writing image" it will say writing at 0.0x and just get stuck, i left it writing for a hour but there was no progress.i accidentally deleted the log when i was reinstalling imgburn, i have a Sony DVD RW DW-G120A with MYR4 firmware with TDK-003-00 media at 2.4x speed (i tried 6.x speed but that didnt work either).
dvdburn0r Posted December 21, 2007 Author Posted December 21, 2007 See pink area at top. Regards Like i said, i deleted the log accidentally and i don't really want to waste another disc to get a log. i'll post this log if it helps I 16:24:10 ImgBurn Version 2.3.2.0 started! I 16:24:11 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 16:24:11 Total Physical Memory: 384,496 KB - Available: 119,000 KB I 16:24:11 Initialising SPTI... I 16:24:11 Searching for SCSI / ATAPI devices... I 16:24:11 Found 1 DVD±RW/RAM!
LIGHTNING UK! Posted December 21, 2007 Posted December 21, 2007 Please copy + paste everything from the info panel on the right within the main ImgBurn window when you've got one of your blanks in the drive.
dvdburn0r Posted December 21, 2007 Author Posted December 21, 2007 SONY DVD RW DW-G120A MYR4 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Physical Format Information (ADIP): Disc ID: TDK-003-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: TDK-003-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0
chewy Posted December 21, 2007 Posted December 21, 2007 DW-G120A with MYR4 oem and crossbranded? for future reference if needed only http://club.cdfreaks.com/f44/flasfix-unabl...88/#post1934930
chewy Posted December 21, 2007 Posted December 21, 2007 http://club.cdfreaks.com/f44/sony-dw-g120a...r-scans-193376/ looks like that firmware is fine
LIGHTNING UK! Posted December 21, 2007 Posted December 21, 2007 Were you in Write mode when you copied + pasted that text dvdburn0r? I ask this because it's not listing any supported write speeds for the media.
dvdburn0r Posted December 21, 2007 Author Posted December 21, 2007 I had it on read mode here it is on write mode SONY DVD RW DW-G120A MYR4 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 6x, 8x, 12x, 16x Physical Format Information (ADIP): Disc ID: TDK-003-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: TDK-003-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0
LIGHTNING UK! Posted December 21, 2007 Posted December 21, 2007 Ok so going by your posts, you say you've tried it at 6x and 2.4x. 2.4x isn't a supported speed hence it's really 6x all over again. Have you actually it at the rated 16x (or even 12x) ?
dvdburn0r Posted December 21, 2007 Author Posted December 21, 2007 i haven't tried it at the 16x (or 12x), should i burn another disc at that speed and see what happens? i don't wanna waste another disc though
LIGHTNING UK! Posted December 21, 2007 Posted December 21, 2007 I can't really see as you have any choice. If it fails again, they might aswell all be classed as coasters anyway - your drive seems to have problems with them and you'll need to buy some better ones (Verbatim / Taiyo Yuden).
dvdburn0r Posted December 22, 2007 Author Posted December 22, 2007 i burnt the dvd with my optorite burner and it successful, heres the log: I 23:41:49 ImgBurn Version 2.3.2.0 started! I 23:41:49 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 23:41:49 Total Physical Memory: 384,496 KB - Available: 172,684 KB I 23:41:49 Initialising SPTI... I 23:41:49 Searching for SCSI / ATAPI devices... I 23:41:49 Found 1 DVD±RW! I 23:43:05 Operation Started! I 23:43:05 Source File: E:\DVD_BURN\JARHEAD.ISO I 23:43:05 Source File Sectors: 2,285,875 (MODE1/2048) I 23:43:05 Source File Size: 4,681,472,000 bytes I 23:43:05 Source File Volume Identifier: JARHEAD I 23:43:05 Source File Implementation Identifier: DVD Shrink I 23:43:05 Source File File System(s): ISO9660, UDF (1.02) I 23:43:05 Destination Device: [1:1:0] OPTORITE DVD RW DD0201 2.60 (D:) (ATA) I 23:43:05 Destination Media Type: DVD+R (Disc ID: TDK-003-00) (Speeds: 1x, 2.4x) I 23:43:05 Destination Media Sectors: 2,295,104 I 23:43:05 Write Mode: DVD I 23:43:05 Write Type: DAO I 23:43:05 Write Speed: MAX I 23:43:05 Link Size: Auto I 23:43:05 Test Mode: No I 23:43:05 BURN-Proof: Enabled I 23:43:05 Filling Buffer... (20 MB) I 23:43:08 Writing LeadIn... I 23:43:19 Writing Image... (LBA: 0 - 2285874) I 00:06:39 Synchronising Cache... I 00:06:44 Closing Track... I 00:06:46 Finalising Disc... I 00:07:48 Image MD5: 5338e0f6b24e76182962978dc12e2c50 I 00:07:48 Operation Successfully Completed! - Duration: 00:24:43 I 00:07:48 Average Write Rate: 3,267 KB/s (2.4x) - Maximum Write Rate: 3,487 KB/s (2.5x) I 00:07:48 Cycling Tray before Verify... W 00:07:54 Waiting for device to become ready... I 00:08:18 Device Ready! I 00:08:18 Operation Started! I 00:08:18 Source Device: [1:1:0] OPTORITE DVD RW DD0201 2.60 (D:) (ATA) I 00:08:18 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: TDK-003-00) (Speeds: 1x, 2.4x) I 00:08:18 Image File: E:\DVD_BURN\JARHEAD.ISO I 00:08:18 Image File Sectors: 2,285,875 (MODE1/2048) I 00:08:18 Image File Size: 4,681,472,000 bytes I 00:08:18 Image File Volume Identifier: JARHEAD I 00:08:18 Image File Implementation Identifier: DVD Shrink I 00:08:18 Image File File System(s): ISO9660, UDF (1.02) I 00:08:18 Verifying Sectors... (LBA: 0 - 2285874) I 00:22:20 Device MD5: 5338e0f6b24e76182962978dc12e2c50 I 00:22:20 Device (Padded) MD5: 31d1806b8f59e50e737bf680508b6e72 I 00:22:20 Image MD5: 5338e0f6b24e76182962978dc12e2c50 I 00:22:20 Operation Successfully Completed! - Duration: 00:14:02 I 00:22:20 Average Verify Rate: 5,436 KB/s (3.9x) - Maximum Verify Rate: 7,004 KB/s (5.1x)
LIGHTNING UK! Posted December 22, 2007 Posted December 22, 2007 That drive is really not up the to job of burning those discs properly (note the 1x, 2.4x write speeds), it's probably using a default write stratagy and producing a disc of questionable quality. That said, if it works, at least the spindle isn't totally useless. You'll just need other discs if you want to burn on your Sony drive.
dvdburn0r Posted December 23, 2007 Author Posted December 23, 2007 i recently got a pack of 100 tdk dvd's, should i get a refund on them?
dvdburn0r Posted December 29, 2007 Author Posted December 29, 2007 (edited) i got some verbatim dvds today and it still gets stuck at writing, i let it write for 2 hours and still no progress.i had to restart my computer as the cancel button didnt work. I 23:05:05 ImgBurn Version 2.3.2.0 started! I 23:05:05 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 23:05:05 Total Physical Memory: 384,496 KB - Available: 177,424 KB I 23:05:05 Initialising SPTI... I 23:05:05 Searching for SCSI / ATAPI devices... I 23:05:05 Found 1 DVD±RW/RAM! I 23:05:17 Operation Started! I 23:05:17 Source File: E:\DVD_BURN\DVD_MOVIE.ISO I 23:05:17 Source File Sectors: 2,285,851 (MODE1/2048) I 23:05:17 Source File Size: 4,681,422,848 bytes I 23:05:17 Source File Volume Identifier: DVD_MOVIE I 23:05:18 Source File Implementation Identifier: DVD Shrink I 23:05:18 Source File File System(s): ISO9660, UDF (1.02) I 23:05:18 Destination Device: [1:1:0] SONY DVD RW DW-G120A MYR4 (D:) (ATA) I 23:05:18 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 6x, 8x, 12x, 16x) I 23:05:18 Destination Media Sectors: 2,295,104 I 23:05:18 Write Mode: DVD I 23:05:18 Write Type: DAO I 23:05:18 Write Speed: 8x I 23:05:18 Link Size: Auto I 23:05:18 Test Mode: No I 23:05:18 BURN-Proof: Enabled I 23:05:18 Filling Buffer... (20 MB) I 23:05:20 Writing LeadIn... I 23:06:01 Writing Image... (LBA: 0 - 2285850) Edited December 29, 2007 by dvdburn0r
chewy Posted December 29, 2007 Posted December 29, 2007 see the faq's for dma if that's fine for the new burner then try moving it to the end of the cable as stand alone master and put it on the shortest power lead all by itself you are using a new 80 conductor cable???
dvdburn0r Posted December 29, 2007 Author Posted December 29, 2007 see the faq's for dma if that's fine for the new burner then try moving it to the end of the cable as stand alone master and put it on the shortest power lead all by itself you are using a new 80 conductor cable??? ok, i checked the dma and thats fine.i cant change the cable setting because my hd's only work on the master setting or i would try doing that.the cable isnt new. i successfully burnt a dvd+rw using clonedvd2, but i tried again with my verbatim dvd+r and it crashed my whole computer at writing at %8.
dvdburn0r Posted December 29, 2007 Author Posted December 29, 2007 i tried another burn using crappy aml media and it burnt and verified correctly I 03:34:33 ImgBurn Version 2.3.2.0 started! I 03:34:33 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 03:34:33 Total Physical Memory: 384,496 KB - Available: 181,552 KB I 03:34:33 Initialising SPTI... I 03:34:33 Searching for SCSI / ATAPI devices... I 03:34:33 Found 1 DVD±RW/RAM! I 03:35:39 Operation Started! I 03:35:39 Source File: E:\DVD_BURN\KAGEMUSHA__1980.ISO I 03:35:39 Source File Sectors: 2,285,851 (MODE1/2048) I 03:35:39 Source File Size: 4,681,422,848 bytes I 03:35:39 Source File Volume Identifier: KAGEMUSHA__1980 I 03:35:39 Source File Implementation Identifier: DVD Shrink I 03:35:39 Source File File System(s): ISO9660, UDF (1.02) I 03:35:39 Destination Device: [1:1:0] SONY DVD RW DW-G120A MYR4 (D:) (ATA) I 03:35:39 Destination Media Type: DVD+R (Disc ID: AML-002-00) (Speeds: 6x, 8x) I 03:35:39 Destination Media Sectors: 2,295,104 I 03:35:39 Write Mode: DVD I 03:35:39 Write Type: DAO I 03:35:39 Write Speed: MAX I 03:35:39 Link Size: Auto I 03:35:39 Test Mode: No I 03:35:39 BURN-Proof: Enabled I 03:35:40 Filling Buffer... (20 MB) I 03:35:42 Writing LeadIn... I 03:36:27 Writing Image... (LBA: 0 - 2285850) I 03:45:53 Synchronising Cache... I 03:45:58 Closing Track... I 03:45:59 Finalising Disc... I 03:46:17 Image MD5: 092dbcc59c49761e415029ecf971fb49 I 03:46:17 Operation Successfully Completed! - Duration: 00:10:38 I 03:46:17 Average Write Rate: 8,077 KB/s (5.8x) - Maximum Write Rate: 8,575 KB/s (6.2x) I 03:46:17 Cycling Tray before Verify... W 03:46:25 Waiting for device to become ready... I 03:46:37 Device Ready! I 03:46:38 Operation Started! I 03:46:38 Source Device: [1:1:0] SONY DVD RW DW-G120A MYR4 (D:) (ATA) I 03:46:38 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: AML-002-00) (Speeds: 6x, 8x) I 03:46:38 Image File: E:\DVD_BURN\KAGEMUSHA__1980.ISO I 03:46:38 Image File Sectors: 2,285,851 (MODE1/2048) I 03:46:38 Image File Size: 4,681,422,848 bytes I 03:46:38 Image File Volume Identifier: KAGEMUSHA__1980 I 03:46:38 Image File Implementation Identifier: DVD Shrink I 03:46:38 Image File File System(s): ISO9660, UDF (1.02) I 03:46:38 Verifying Sectors... (LBA: 0 - 2285850) I 03:57:29 Device MD5: 092dbcc59c49761e415029ecf971fb49 I 03:57:29 Device (Padded) MD5: 6fa1ae653182a2bde2cfd7fb3b7d723b I 03:57:29 Image MD5: 092dbcc59c49761e415029ecf971fb49 I 03:57:29 Operation Successfully Completed! - Duration: 00:10:51 I 03:57:29 Average Verify Rate: 7,022 KB/s (5.1x) - Maximum Verify Rate: 8,497 KB/s (6.1x)
chewy Posted December 29, 2007 Posted December 29, 2007 So instead of having your dvd burners share a cable, you have them share with your hard drives? I never had much luck with anything sharing, but dvd burners that were never used at the same time. My hard drives and dvd burners are always being used at the same time and they never share a cable.
Recommended Posts