toomey Posted December 22, 2007 Share Posted December 22, 2007 Hi all I'm new here, so hope you can help (thanks for having me too!) I have a new AOpen DVD DL writer (BenQ DW 2000?) and it burns normal DVD5's fine As soon as I try and burn a DL one (using Imgburn) it gets half way through (presumbaly to the point where it does the layer change?) and then bombs out with a write error I am using Zero Defex (cheapy) DVD DL+R's. The drive won't allow me to burn any slower than 4x (even though i force 2x in the settings) and i wonder if this is the problem - it always shoots up to 4x speed. or is it something else ie: firmware hope you an all suggest something as i've just created 5 coasters with different settings ! Thanks in advance CT Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 22, 2007 Share Posted December 22, 2007 Please read the bit in red/pink at the top of this page. Link to comment Share on other sites More sharing options...
blutach Posted December 23, 2007 Share Posted December 23, 2007 That will tell you to use Verbatim 2.4x +R DLs only (MKM-001). Not el cheapo, I admit, but el goodo. Regards Link to comment Share on other sites More sharing options...
Recommended Posts