buzuki1 Posted January 26, 2008 Posted January 26, 2008 I would really appreciate any help on the following : I use Imgburn to backup my Wii games - up until last week ( due to my stupid mistake and the failure to properly set up my DMA ) i was only able to write with 0.7x speed - th ebackups took ages to burn but they worked like a charm on my Wii - ever since i fixed my DMA i keep having problems - it seems that i am not able to burn with speeds lower than 6X and this ( probably ) causes the burns to not be good ( i apologise if i am being not too technical - or if i am talking liek a total newbie ) This is what Imgburn says PLEXTOR DVDR PX-760A 1.04 (ATA) Current Profile: DVD-R Disc Information: Status: Empty Erasable: No Free Sectors: 2.297.888 Free Space: 4.706.074.624 bytes Free Time: 510:40:38 (MM:SS:FF) Supported Write Speeds: 6x; 8x; 12x; 16x; 18x I would really like to be able to burn at lower speeds ( and i tried many differenet media - Verbatim / samsung / maxwell / tdk ) - the games sometimes they work - sometimes they don't - sometimes i get an error and i have to eject th egame and re-load it Does anyone ofyou have any idea how i will be able to burn at a slower speed? Appreciate any help Thanks in advance Christos
LIGHTNING UK! Posted January 26, 2008 Posted January 26, 2008 Drives only write to certain media at certain speeds. I very much doubt any new drive would still support 1x burning - except maybe on the very early 2x or 4x discs. Update your drive to the 1.07 firmware btw, you're a bit behind there.
Recommended Posts